ASTM D 5885/D5885M : 2020
Current
The latest, up-to-date edition.
Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
Hardcopy , PDF
English
01-09-2020
Committee |
D 35
|
DocumentType |
Test Method
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method covers a procedure for the determination of the oxidative induction time (OIT) of polyolefin geosynthetics using high-pressure differential scanning calorimetry.
1.2The focus of the test is on geomembranes, but geogrids, geonets, geotextiles, and other polyolefin-related geosynthetics are also suitable for such evaluation.
1.3This test method measures the oxidative induction time associated with a given test specimen at a specified temperature and pressure.
1.4This is an accelerated test for highly stabilized materials. It is applicable only to material whose OIT values under 3.4 MPa of oxygen are greater than 30 min at 150 °C.
1.5The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 473 : 2022 : REV D | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
ASTM G 88 : 2013 : EDT 1 | Standard Guide for Designing Systems for Oxygen Service |
ASTM E 473 : 2022 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 473 : 2021 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM D 8117 : 2021 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry |
ASTM D 3895 : 2019 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
ASTM D 8117 : 2017 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry |
ASTM E 473 : 2022 : REV B | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM G 88 : 2013 | Standard Guide for Designing Systems for Oxygen Service |
ASTM E 473 : 2018 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM G 88 : 2021 | Standard Guide for Designing Systems for Oxygen Service |
ASTM D 4491/D4491M : 2020 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM E 473 : 2023 : REV A | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 473 : 2022 : REV C | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 4439 : 2024 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4491/D4491M : 2022 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 4439 : 2024 : EDT 1 | Standard Terminology for Geosynthetics |
ASTM D 4491/D4491M : 2021 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 4439 : 2024 | Standard Terminology for Geosynthetics |
ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
ASTM E 473 : 2021 : REV A | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 473 : 2023 : REV B | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 473 : 2022 : REV A | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 473 : 2023 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.