ASTM D 5846 : 2007 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
Hardcopy , PDF
10-08-2024
English
01-10-2017
CONTAINED IN VOL. 05.03, 2017 Defines a procedure for evaluating the oxidation stability of petroleum base hydraulic oils and oils for steam and gas turbines.
Committee |
D 02
|
DocumentType |
Test Method
|
Pages |
6
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers a procedure for evaluating the oxidation stability of petroleum base hydraulic oils and oils for steam and gas turbines.
1.2This test method was developed to evaluate the oxidation stability of petroleum base hydraulic oils and oils for steam and gas turbines.
1.2.1Rust and oxidation inhibited hydraulic, anti-wear hydraulic and turbine oils of ISO 32–68 viscosity were used to develop the precision statement. This test method has been used to evaluate the oxidation stability of fluids made with synthetic basestock and in-service oils; however, these fluids have not been used in cooperative testing to develop precision data.
1.3The values stated in SI units are to be regarded as standard.
1.3.1Exception—The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Identified hazardous chemicals are listed in 7.3, 7.6, and 7.8. Before using this test method, refer to suppliers' safety labels, Material Safety Data Sheets, and other technical literature.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 6514 : 2003 : R2019 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
ASTM D 4871 : 2011 : R2016 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
ASTM D 7155 : 2018 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
ASTM D 6514 : 2003 : R2019 : EDT 1 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
ASTM D 7155 : 2020 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4871 : 2006 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
ASTM D 974 : 2014 : EDT 2 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 974 : 2001 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
ASTM D 4740 : 2002 | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
ASTM D 664 : 2018 : EDT 2 | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
ASTM D 4871 : 2011 : R2022 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
BS 1829(1962) : LATEST | REFERENCE TABLES FOR IRON V CONSTANTAN THERMOCOUPLES |
ASTM D 5770 : 2002 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
ASTM D 664 : 2017 : REV A | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
ASTM D 3339 : 1995 : EDT 2 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM B 1 : 1995 | Standard Specification for Hard-Drawn Copper Wire |
ASTM D 943 : 2019 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
ASTM D 974 : 2022 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 664 : 2024 | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
ASTM D 4740 : 2004 : R2009 | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
ASTM D 4740 : 1995 | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
ASTM D 4740 : 2019 | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
ASTM D 4740 : 2004 : R2014 | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
ASTM D 974 : 2021 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
ASTM D 5770 : 2011 : R2017 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
ASTM D 5770 : 2023 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
ASTM D 3339 : 2012 : R2017 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 4871 : 2011 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
ASTM D 3339 : 2012 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 3339 : 2008 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 5770 : 2002 : R2007 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
ASTM D 664 : 1995 | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
ASTM D 943 : 2018 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
ASTM D 3339 : 2011 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 3339 : 1995 : R2000 : EDT 1 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 664 : 2011 : REV A | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
ASTM D 3339 : 2007 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 4057 : 2022 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4871 : 2000 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
ASTM D 943 : 1999 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
ASTM D 3339 : 2004 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 4740 : 2004 | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
ASTM D 4871 : 2011 : R2016 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4740 : 1995 : R2000 | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
ASTM D 3339 : 2021 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 943 : 2017-08 | TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS |
ASTM D 5770 : 1996 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
ASTM D 3339 : 2002 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 5770 : 2011 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.