ASTM D 5717 : 1995 : EDT 1
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Guide for Design of Ground-Water Monitoring Systems in Karst and Fractured-Rock Aquifers (Withdrawn 2005)
Hardcopy , PDF
05-11-2013
English
13-10-1998
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.08, 2008 Considers the characterization of karst and fractured-rock aquifers as an integral component of monitoring-system design. The development of a conceptual hydrogeologic model that identifies and defines the various components of the flow system is recommended prior to the design and implementation of a monitoring system. Guidelines apply to the determination of ground-water flow and contaminant transport from existing sites, assessment of proposed sites, and determination of wellhead or springhead protection areas.
| Committee |
D 18
|
| DocumentType |
Guide
|
| Pages |
18
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
1.1 Justification -This guide considers the characterization of karst and fractured-rock aquifers as an integral component of monitoring-system design. Hence, the development of a conceptual hydrogeologic model that identifies and defines the various components of the flow system is recommended prior to the design and implementation of a monitoring system.
1.2 Methodology and Applicability -This guide is based on recognized methods of monitoring-system design and implementation for the purpose of collecting representative ground-water data. The design guidelines are applicable to the determination of ground-water flow and contaminant transport from existing sites, assessment of proposed sites, and determination of wellhead or springhead protection areas.
1.3 Objectives -The objectives of this guide are to outline procedures for obtaining information on hydrogeologic characteristics and water-quality data representative of karst and fractured-rock aquifers.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 5903 : 1996 : R2017 : EDT 1 | Standard Guide for Planning and Preparing for a Groundwater Sampling Event |
| ASTM D 5903 : 1996 : R2006 | Standard Guide for Planning and Preparing for a Groundwater Sampling Event |
| ASTM E 2531 : 2006 | Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
| ASTM D 6036 : 1996 : R2008 | Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements<char: emdash>Use of Maps |
| ASTM D 5903 : 1996 : R2012 | Standard Guide for Planning and Preparing for a Groundwater Sampling Event |
| ASTM E 2531 : 2006 : EDT 1 | Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
| ASTM E 2531 : 2006 : R2014 | Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
| ASCE 34 01 : 2001 | STANDARD GUIDELINES FOR ARTIFICIAL RECHARGE OF GROUND WATER |
| ASTM D 5979 : 1996 : R2014 | Standard Guide for Conceptualization and Characterization of Groundwater Systems |
| ASTM D 6235 : 2004 | Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites |
| ASTM D 5730 : 2004 | Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater (Withdrawn 2013) |
| ASTM D 6036 : 1996 : R2014 | Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps (Withdrawn 2023) |
| ASTM D 5979 : 1996 : EDT 1 | Standard Guide for Conceptualization and Characterization of Ground-Water Systems |
| ASTM D 5979 : 1996 : R2002 | Standard Guide for Conceptualization and Characterization of Ground-Water Systems |
| ASTM D 5979 : 1996 : R2008 | Standard Guide for Conceptualization and Characterization of Groundwater Systems |
| ASTM D 5903 : 1996 : EDT 1 | Standard Guide for Planning and Preparing for a Groundwater Sampling Event |
| ASTM D 6235 : 2004 : R2010 | Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites |
| ASTM D 6036 : 1996 : R2002 | Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements—Use of Maps |
| ASTM D 4630 : 2019 | Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test |
| ASTM D 4631 : 2018 | Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique |
| ASTM D 6235 : 2018 | Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites |
| ASTM D 5881 : 2018 | Standard Practice for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.