ASTM D 5681 : 2017-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TERMINOLOGY FOR WASTE AND WASTE MANAGEMENT
Superseded date
01-10-2017
Published date
01-09-2017
CONTAINED IN VOL. 11.04, 2017 Outlines standard definitions of terms used in the general area of waste and waste management.
Committee |
D 34
|
DocumentType |
Redline
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
ASTM E 777 : 2017 : REV A | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel |
ASTM D 6907 : 2005 : EDT 1 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
ASTM E 791 : 2008 : R2016 | Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases |
ASTM D 5792 : 2010 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM D 7831 : 2013 | Standard Practice for Sampling of Tanks by Field Personnel |
ASTM D 5831 : 2017 : REDLINE | Standard Practice for Screening Fuels in Soils |
ASTM D 5198 : 2017 : REDLINE | Standard Practice for Nitric Acid Digestion of Solid Waste |
ASTM E 790 : 2015 : REDLINE | Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples |
ASTM D 6270 : 2017 : REDLINE | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
ASTM D 6699 : 2016 : REDLINE | Standard Practice for Sampling Liquids Using Bailers |
ASTM D 5792 : 2010 : R2015 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM D 7353 : 2007 : R2013 | Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump |
ASTM D 5368 : 2013 | Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014) |
ASTM D 7203 : 2011 | Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor |
ASTM D 6956 : 2017 : REDLINE | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
ASTM D 4547 : 2015 : REDLINE | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
ASTM E 777 : 2017 | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel |
ASTM D 6323 : 2012 : EDT 1 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities (Withdrawn 2018) |
ASTM D 7204 : 2015 : REDLINE | Standard Practice for Sampling Waste Streams on Conveyors |
ASTM D 7203 : 2011 : R2017 | Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor (Withdrawn 2022) |
ASTM D 8064 : 2016 | Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams (Withdrawn 2024) |
ASTM D 4646 : 2016 : REDLINE | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
ASTM D 6009 : 2012 : REDLINE | Standard Guide for Sampling Waste Piles |
ASTM E 953/E953M : 2016 : REDLINE | Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash |
ASTM D 6907 : 2005 : R2016 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
ASTM D 4844 : 2016 : REDLINE | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
ASTM E 1109 : 1986 : R1996 | Standard Test Method for Determining the Bulk Density of Solid Waste Fractions |
ASTM D 6538 : 2012 : REDLINE | Standard Guide for Sampling Wastewater With Automatic Samplers |
ASTM E 1109 : 1986 : R2009 | Standard Test Method for Determining the Bulk Density of Solid Waste Fractions |
ASTM D 5283 : 1992 : R2009 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation |
ASTM D 5658 : 2013 : REDLINE | Standard Practice for Sampling Unconsolidated Waste From Trucks |
ASTM E 791 : 2008 | Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases |
ASTM D 6907 : 2005 : R2010 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
ASTM D 5232 : 2013 | Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material |
ASTM D 5057 : 2017 : REDLINE | Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste |
ASTM E 829 : 2016 | Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis |
ASTM D 7353 : 2007 | Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump |
ASTM D 6323 : 2012 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
ASTM E 1109 : 1986 : R2004 | Standard Test Method for Determining the Bulk Density of Solid Waste Fractions |
ASTM D 6661 : 2017 : REDLINE | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
ASTM D 8018 : 2015 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
ASTM D 5283 : 1992 : R2003 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation |
ASTM D 6759 : 2016 : REDLINE | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
ASTM D 5283 : 1992 : R1997 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation |
ASTM E 778 : 2015 : REDLINE | Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
ASTM D 6907 : 2005 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
ASTM D 8187 : 2018 | Standard Guide for Interpretation of Standard Humidity Cell Test Results |
ASTM D 5058 : 2012 : REDLINE | Standard Practices for Compatibility of Screening Analysis of Waste |
ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
ASTM E 775 : 2015 : REDLINE | Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
ASTM D 3987 : 2012 : REDLINE | Standard Practice for Shake Extraction of Solid Waste with Water |
ASTM E 1138 : 1989 | Terminology of Technical Aspects of Products Liability Litigation (Withdrawn 1995) |
ASTM D 5680 : 2014 : REDLINE | Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
ASTM E 959 : 1983 : R2018 | Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment |
ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM D 4646 : 2016 : REDLINE | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
ASTM D 6956 : 2017 : REDLINE | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
ASTM E 953/E953M : 2016 : REDLINE | Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash |
ASTM D 5285 : 2003 | Standard Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments (Withdrawn 2008) |
ASTM D 5745 : 2015 : REDLINE | Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation |
ASTM E 1527 : 2013 | Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process |
ASTM D 6538 : 2012 : REDLINE | Standard Guide for Sampling Wastewater With Automatic Samplers |
ASTM E 1266 : 2012 : REDLINE | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
ASTM D 5368 : 2013 | Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014) |
ASTM D 6051 : 2015 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
ASTM D 6346 : 2017 : REDLINE | Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs |
ASTM D 4790 : 2014 : REDLINE | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
ASTM D 5679 : 2016 : REDLINE | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
ASTM D 4439 : 2017-08 | TERMINOLOGY FOR GEOSYNTHETICS |
ASTM D 6759 : 2016 : REDLINE | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
ASTM D 5956 : 2015 | Standard Guide for Sampling Strategies for Heterogeneous Wastes |
ASTM D 4547 : 2015 : REDLINE | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.