ASTM D 5391 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023)
Hardcopy , PDF
20-04-2023
English
01-03-2014
This test method covers the determination of electrical conductivity and resistivity of high purity water samples below 10 μS/cm (above 0.1 Mohm-cm).
Committee |
D 19
|
DocumentType |
Test Method
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the determination of electrical conductivity and resistivity of high purity water samples below 10 μS/cm (above 0.1 Mohm-cm). It is applicable to both continuous and periodic measurements but in all cases, the water must be flowing in order to provide representative sampling. Static grab sampling cannot be used for such high purity water. Continuous measurements are made directly in pure water process lines, or in side stream sample lines to enable measurements on high temperature or high pressure samples, or both.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 4266 : 2017 | Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins |
ASTM D 5196 : 2006 : R2018 | Standard Guide for Bio-Applications Grade Water |
ASTM D 3087 : 2017 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
ASTM D 6302 : 1998 : R2017 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM D 7513 : 2017 | Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges |
ASTM D 6504 : 2011 : R2016 : EDT 1 | Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water |
ASTM D 1125 : 2014 | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
ASTM D 5127 : 2013 : R2018 | Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries |
ASTM D 4519 : 2016 | Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity |
ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
ASTM D 3864 : 2006 | Standard Guide for Continual On-Line Monitoring Systems for Water Analysis |
ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
ASTM D 2777 : 2012 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 2186 : 2005 : R2009 | Standard Test Methods for Deposit-Forming Impurities in Steam (Withdrawn 2014) |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM D 1125 : 2014 | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
ASTM D 2777 : 2003 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 2777 : 2021 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1066 : 2018 | Standard Practice for Sampling Steam |
ASTM D 3370 : 2010 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1066 : 2006 | Standard Practice for Sampling Steam |
ASTM D 1066 : 2018 : EDT 1 | Standard Practice for Sampling Steam |
ASTM D 2777 : 1998 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 3370 : 2008 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM D 2186 : 2005 | Standard Test Methods for Deposit-Forming Impurities in Steam |
ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
ASTM D 1066 : 1997 : R2001 | Standard Practice for Sampling Steam |
ASTM D 1125 : 1995 : R1999 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM D 1066 : 2011 | Standard Practice for Sampling Steam |
ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
ASTM D 2777 : 2008 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1192 : 1998 | Standard Guide for Equipment for Sampling Water and Steam in Closed Conduits (Withdrawn 2003) |
ASTM D 4519 : 1994 : R2005 | Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity |
ASTM D 2777 : 2006 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 2186 : 1984 : R2005 | Standard Test Methods for Deposit-Forming Impurities in Steam |
ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
ASTM D 4519 : 2010 | Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity |
ASTM D 3370 : 1976 | Standard Practices for Sampling Water |
ASTM D 1125 : 1995 : R2005 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
ASTM D 3864 : 2012 | Standard Guide for On-Line Monitoring Systems for Water Analysis |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 2186 : 1984 : R1999 : EDT 1 | Standard Test Methods for Deposit-Forming Impurities in Steam |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
ASTM D 4519 : 1994 : R1999 : EDT 1 | Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity |
ASTM D 3370 : 2007 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM D 2777 : 2008 : EDT 1 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1125 : 1995 : R2009 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
ASTM D 3864 : 1996 : R2000 | Standard Guide for Continual On-Line Monitoring Systems for Water Analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.