ASTM D 5386 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
Hardcopy , PDF
10-05-2024
English
27-01-2017
This test method covers an instrumental method for the CIE (Commission International de l’Eclairage) tristimulus measurement of the color of near-clear liquid samples.
Committee |
D 16
|
DocumentType |
Test Method
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers an instrumental method for the CIE (Commission International de l’Eclairage) tristimulus measurement of the color of near-clear liquid samples. The transmission measurement values are converted to the color scale in the platinum-cobalt (Pt-Co) system.
1.2This test method has been found applicable to the color measurement of clear, liquid samples, free of haze, with nominal Pt-Co color values in the 0 to 100 range. It is applicable to non-fluorescent liquids with light absorption characteristics similar to those of the Pt-Co color standard solutions.
1.3The tristimulus colorimetry may be calculated from spectral measurements or be obtained directly from a colorimeter. Practice E1455 provides some guidance on colorimeters, while Test Methods D1686 and D2108 deal with the visual and instrumental measurement of near-clear liquids.
1.4In determining the conformance of the test results using this method to applicable specifications, results shall be rounded in accordance with the rounding off methods of Practice E29.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.
ASTM D 1045 : 2014 | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
ASTM D 2627 : 2008 : R2012 | Standard Specification for Diacetone Alcohol (Withdrawn 2021) |
ASTM D 2694 : 2005 : R2019 | Standard Specification for Diethylene Glycol<sup>,</sup> |
ASTM D 4710 : 2007 : R2012 | Standard Specification for Acetaldehyde (Withdrawn 2021) |
ASTM D 4877 : 2014 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
ASTM D 2916 : 2009 : R2017 | Standard Specification for Isophorone |
ASTM D 2693 : 2007 : R2012 | Standard Specification for Ethylene Glycol (Withdrawn 2021) |
ASTM D 5606 : 2017 | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
ASTM D 7951 : 2018 | Standard Specification for Disproportionation (TDP) Toluene |
ASTM D 2190 : 2007 : R2013 | Standard Specification for Vinyl Acetate |
ASTM D 841 : 2017 : REV A | Standard Specification for Nitration Grade Toluene |
ASTM D 3128 : 2007 : R2013 | Standard Specification for 2-Methoxyethanol |
ASTM D 4077 : 2017 | Standard Specification for Cumene (Isopropylbenzene) |
ASTM D 5309 : 2017 | Standard Specification for Cyclohexane 999 |
ASTM D 5137 : 2007 : R2013 | Standard Specification for Hexyl Acetate |
ASTM D 2917 : 2007 : R2013 | Standard Specification for Methyl Isoamyl Ketone |
ASTM D 5164 : 2005 : R2019 | Standard Specification for Propylene Glycol and Dipropylene Glycol |
ASTM E 2664 : 2016 | Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol |
ASTM D 5871 : 2017 | Standard Specification for Benzene for Cyclohexane Feedstock |
ASTM D 4836 : 2009 : R2017 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
ASTM D 2359 : 2018 : REV A | Standard Specification for Refined Benzene-535 |
ASTM D 4835 : 2008 : R2012 | Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021) |
ASTM D 3735 : 2007 : R2012 | Standard Specification for VM&P Naphthas (Withdrawn 2021) |
ASTM D 8087 : 2018 | Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry |
ASTM D 4709 : 2007 : R2012 | Standard Specification for Methyl Acrylate (Withdrawn 2021) |
ASTM D 2827 : 2019 | Standard Specification for Styrene Monomer |
ASTM D 1152 : 2006 : R2012 | Standard Specification for Methanol (Methyl Alcohol) (Withdrawn 2021) |
ASTM D 2636 : 2007 : R2012 | Standard Specification for Hexylene Glycol (Withdrawn 2021) |
ASTM D 3540 : 2012 | Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade) (Withdrawn 2021) |
ASTM D 3728 : 2008 : R2012 | Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) (Withdrawn 2021) |
ASTM D 1718 : 2009 : R2017 | Standard Specification for Isobutyl Acetate (95 % Grade) |
ASTM D 2635 : 2007 : R2012 | Standard Specification for Methyl Isobutyl Carbinol (Withdrawn 2021) |
ASTM D 329 : 2007 : R2013 | Standard Specification for Acetone |
ASTM D 7124 : 2017 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
ASTM D 7185 : 2017 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
ASTM D 4615 : 2012 | Standard Specification for n-Butyl Acetate (All Grades) (Withdrawn 2021) |
ASTM D 8005 : 2018 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 5211 : 2017 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM D 4837 : 2007 : R2012 | Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021) |
ASTM D 4890 : 2018 | Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols |
ASTM D 843 : 2019 | Standard Specification for Nitration Grade Xylene |
ASTM D 1153 : 2012 | Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021) |
ASTM D 7125 : 2017 | Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process |
ASTM D 2378 : 2007 : R2012 | Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited (Withdrawn 2021) |
ASTM D 3548 : 2009 : R2017 | Standard Specification for Ethyl Acrylate |
ASTM D 1836 : 2007 : R2013 | Standard Specification for Commercial Hexanes |
ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
ASTM D 330 : 2007 : R2013 | Standard Specification for 2-Butoxyethanol |
ASTM D 1969 : 2007 : R2012 | Standard Specification for 2-Ethylhexanol (Withdrawn 2021) |
ASTM D 2634 : 2007 : R2013 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
ASTM D 4734 : 2018 : REV A | Standard Specification for Refined Benzene-545 |
ASTM D 3193 : 2019 | Standard Specification for Ethylbenzene |
ASTM D 608 : 2005 : R2019 | Standard Specification for Dibutyl Phthalate |
ASTM D 5136 : 2019 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
ASTM D 6367 : 2017 | Standard Specification for AMS (α-Methylstyrene) |
ASTM D 3131 : 2007 : R2013 | Standard Specification for Isopropyl Acetate (99 % Grade) |
ASTM D 4416 : 2009 : R2017 | Standard Specification for Acrylic Acid |
ASTM D 1153 : 2022 | Standard Specification for Methyl Isobutyl Ketone |
ASTM E 805 : 2022 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
ASTM D 841 : 2019 | Standard Specification for Nitration Grade Toluene |
ASTM D 5871 : 2019 | Standard Specification for Benzene for Cyclohexane Feedstock |
ASTM D 4360 : 2011 : R2019 | Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone |
ASTM D 740 : 2011 : R2019 | Standard Specification for Methyl Ethyl Ketone<sup>,</sup> |
ASTM D 1836 : 2007 : R2021 | Standard Specification for Commercial Hexanes |
ASTM D 2916 : 2009 : R2023 | Standard Specification for Isophorone |
ASTM D 3735 : 2022 | Standard Specification for VM&P Naphthas |
ASTM D 2917 : 2007 : R2021 | Standard Specification for Methyl Isoamyl Ketone |
ASTM E 1119 : 2023 | Standard Specification for Industrial Grade Ethylene Glycol |
ASTM D 1718 : 2009 : R2023 | Standard Specification for Isobutyl Acetate (95 % Grade) |
ASTM D 2693 : 2022 | Standard Specification for Ethylene Glycol |
ASTM D 7185 : 2019 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
ASTM D 7124 : 2019 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
ASTM D 4615 : 2022 | Standard Specification for <emph type="ital">n</emph>-Butyl Acetate (All Grades) |
ASTM E 2470 : 2022 | Standard Specification for Polyester Grade Ethylene Glycol |
ASTM D 4416 : 2009 : R2023 | Standard Specification for Acrylic Acid |
ASTM E 2680 : 2023 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 3131 : 2007 : R2021 | Standard Specification for Isopropyl Acetate (99 % Grade) |
ASTM D 4077 : 2023 | Standard Specification for Cumene (Isopropylbenzene) |
ASTM D 3130 : 2011 : R2019 | Standard Specification for <emph type="bdit">n</emph>-Propyl Acetate (96 % Grade) |
ASTM D 4877 : 2019 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
ASTM D 1007 : 2011 : R2019 | Standard Specification for <emph type="bdit">sec</emph>-Butyl Alcohol<sup>,</sup> |
ASTM D 331 : 2011 : R2019 | Standard Specification for 2-Ethoxyethanol<sup>,</sup> |
ASTM D 3193 : 2024 | Standard Specification for Ethylbenzene |
ASTM D 5309 : 2022 | Standard Specification for Cyclohexane 999 |
ASTM D 7951 : 2020 | Standard Specification for Disproportionation (TDP) Toluene |
ASTM D 1969 : 2022 | Standard Specification for 2-Ethylhexanol |
ASTM D 770 : 2011 : R2019 | Standard Specification for Isopropyl Alcohol<sup>,</sup> |
ASTM D 304 : 2011 : R2019 | Standard Specification for <emph type="bdit">n</emph>-Butyl Alcohol (Butanol) |
ASTM D 4734 : 2020 | Standard Specification for Refined Benzene-545 |
ASTM D 3622 : 2011 : R2019 | Standard Specification for 1-Propanol (<emph type="bdit">n</emph>-Propyl Alcohol) |
ASTM D 4171 : 2022 | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 4836 : 2009 : R2023 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
ASTM D 330 : 2007 : R2021 | Standard Specification for 2-Butoxyethanol |
ASTM D 5606 : 2019 | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
ASTM D 4614 : 2011 : R2019 | Standard Specification for Ethyl Acetate (All Grades) |
ASTM D 5137 : 2007 : R2021 | Standard Specification for Hexyl Acetate |
ASTM D 2359 : 2019 | Standard Specification for Refined Benzene-535 |
ASTM D 6367 : 2021 | Standard Specification for AMS (α-Methylstyrene) |
ASTM D 2190 : 2007 : R2021 | Standard Specification for Vinyl Acetate |
ASTM D 5471 : 2023 | Standard Specification for O-Xylene 980 |
ASTM D 3548 : 2009 : R2023 | Standard Specification for Ethyl Acrylate |
ASTM D 2634 : 2007 : R2021 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
ASTM E 202 : 2018 | Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols |
ASTM D 1719 : 2011 : R2019 | Standard Specification for Isobutyl Alcohol<sup>,</sup> |
ASTM D 7125 : 2023 | Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process |
ASTM D 2378 : 2022 | Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited |
ASTM D 3128 : 2007 : R2021 | Standard Specification for 2-Methoxyethanol |
ASTM D 5211 : 2019 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM D 329 : 2007 : R2021 | Standard Specification for Acetone |
ASTM D 1045 : 2019 | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
ASTM E 1455 : 2003 : R2010 | Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters |
ASTM D 2108 : 2010 : R2020 | Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) |
ASTM D 6809 : 2002 : R2016 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 6809 : 2020 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM E 1455 : 2017 : R2022 | Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters |
ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 8005 : 2018 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 3437 : 1999 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM E 179 : 2017 | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
ASTM D 2108 : 2010 | Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 3437 : 2010 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 2108 : 2010 : R2015 | Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) |
ASTM D 1686 : 2019 | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM E 1455 : 1997 | Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters |
ASTM D 3437 : 2015 : R2022 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 8005 : 2015 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 2108 : 2005 | Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) |
ASTM D 6809 : 2002 : R2012 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 1455 : 2003 | Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters |
ASTM E 179 : 2017 : R2022 | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM D 8005 : 2023 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 3437 : 2011 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 3437 : 2008 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 3437 : 2003 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM E 1455 : 2017 | Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters |
ASTM E 308 : 2018 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
ASTM D 2108 : 1997 | Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) |
ASTM D 6809 : 2002 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 1686 : 2010 | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
ASTM E 313 : 1998 | Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates |
ASTM D 1686 : 1996 | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM E 1455 : 2016 | Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM E 308 : 2022 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
ASTM D 1686 : 1996 : R2004 | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
ASTM D 6809 : 2002 : R2007 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM D 1686 : 1996 : R2000 | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.