ASTM D 5386 : 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
Hardcopy , PDF
10-05-2024
English
01-01-2010
Committee |
D 16
|
DocumentType |
Test Method
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This test method covers an instrumental method for the CIE (Commission International de l'Eclairage) tristimulus measurement of the color of near-clear liquid samples. The measurement is converted to color ratings in the platinum-cobalt system.
1.2 This test method has been found applicable to the color measurement of clear, liquid samples, free of haze, with nominal platinum cobalt color values in the 0 to 100 range. It is applicable to nonfluorescent liquids with light absorption characteristics similar to those of the platinum cobalt color standard solutions. Test Methods D1686, D2108, and deal with the visual and instrumental measurement of near-clear liquids.
1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded in accordance with the rounding off methods of Practice E29.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.
ASTM D 3193 : 2019 | Standard Specification for Ethylbenzene |
ASTM D 608 : 2005 : R2019 | Standard Specification for Dibutyl Phthalate |
ASTM D 4836 : 2009 : R2017 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
ASTM D 2359 : 2018 : REV A | Standard Specification for Refined Benzene-535 |
ASTM D 4835 : 2008 : R2012 | Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021) |
ASTM D 3735 : 2007 : R2012 | Standard Specification for VM&P Naphthas (Withdrawn 2021) |
ASTM D 8087 : 2018 | Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry |
ASTM D 4709 : 2007 : R2012 | Standard Specification for Methyl Acrylate (Withdrawn 2021) |
ASTM D 2827 : 2019 | Standard Specification for Styrene Monomer |
ASTM D 1152 : 2006 : R2012 | Standard Specification for Methanol (Methyl Alcohol) (Withdrawn 2021) |
ASTM D 2636 : 2007 : R2012 | Standard Specification for Hexylene Glycol (Withdrawn 2021) |
ASTM D 3540 : 2012 | Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade) (Withdrawn 2021) |
ASTM D 3728 : 2008 : R2012 | Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) (Withdrawn 2021) |
ASTM D 1718 : 2009 : R2017 | Standard Specification for Isobutyl Acetate (95 % Grade) |
ASTM D 2635 : 2007 : R2012 | Standard Specification for Methyl Isobutyl Carbinol (Withdrawn 2021) |
ASTM D 329 : 2007 : R2013 | Standard Specification for Acetone |
ASTM D 1153 : 2012 | Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021) |
ASTM D 7125 : 2017 | Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process |
ASTM D 2378 : 2007 : R2012 | Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited (Withdrawn 2021) |
ASTM D 3548 : 2009 : R2017 | Standard Specification for Ethyl Acrylate |
ASTM D 1836 : 2007 : R2013 | Standard Specification for Commercial Hexanes |
ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
ASTM D 330 : 2007 : R2013 | Standard Specification for 2-Butoxyethanol |
ASTM D 1969 : 2007 : R2012 | Standard Specification for 2-Ethylhexanol (Withdrawn 2021) |
ASTM D 7185 : 2017 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
ASTM D 5606 : 2017 | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
ASTM D 7951 : 2018 | Standard Specification for Disproportionation (TDP) Toluene |
ASTM D 2190 : 2007 : R2013 | Standard Specification for Vinyl Acetate |
ASTM D 841 : 2017 : REV A | Standard Specification for Nitration Grade Toluene |
ASTM D 3128 : 2007 : R2013 | Standard Specification for 2-Methoxyethanol |
ASTM D 4077 : 2017 | Standard Specification for Cumene (Isopropylbenzene) |
ASTM D 5309 : 2017 | Standard Specification for Cyclohexane 999 |
ASTM D 5137 : 2007 : R2013 | Standard Specification for Hexyl Acetate |
ASTM D 2917 : 2007 : R2013 | Standard Specification for Methyl Isoamyl Ketone |
ASTM D 5164 : 2005 : R2019 | Standard Specification for Propylene Glycol and Dipropylene Glycol |
ASTM E 2664 : 2016 | Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol |
ASTM D 4615 : 2012 | Standard Specification for n-Butyl Acetate (All Grades) (Withdrawn 2021) |
ASTM D 7124 : 2017 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
ASTM D 8005 : 2018 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 5211 : 2017 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM D 4837 : 2007 : R2012 | Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021) |
ASTM D 4890 : 2018 | Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols |
ASTM D 843 : 2019 | Standard Specification for Nitration Grade Xylene |
ASTM D 2627 : 2008 : R2012 | Standard Specification for Diacetone Alcohol (Withdrawn 2021) |
ASTM D 2694 : 2005 : R2019 | Standard Specification for Diethylene Glycol<sup>,</sup> |
ASTM D 4710 : 2007 : R2012 | Standard Specification for Acetaldehyde (Withdrawn 2021) |
ASTM D 1045 : 2014 | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
ASTM D 4877 : 2014 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
ASTM D 2916 : 2009 : R2017 | Standard Specification for Isophorone |
ASTM D 2693 : 2007 : R2012 | Standard Specification for Ethylene Glycol (Withdrawn 2021) |
ASTM D 5871 : 2017 | Standard Specification for Benzene for Cyclohexane Feedstock |
ASTM D 4734 : 2018 : REV A | Standard Specification for Refined Benzene-545 |
ASTM D 2634 : 2007 : R2013 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
ASTM D 5136 : 2019 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
ASTM D 6367 : 2017 | Standard Specification for AMS (α-Methylstyrene) |
ASTM D 3131 : 2007 : R2013 | Standard Specification for Isopropyl Acetate (99 % Grade) |
ASTM D 4416 : 2009 : R2017 | Standard Specification for Acrylic Acid |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.