ASTM D 5101 : 2012 : R2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
Available format(s)
Hardcopy , PDF
Superseded date
09-11-2023
Superseded by
Language(s)
English
Published date
23-02-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.09, 2017 Specifies performance tests applicable for determining the compatibility of geotextiles with various types of water-saturated soils under unidirectional flow conditions.
| Committee |
D 35
|
| DocumentType |
Test Method
|
| Pages |
8
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers performance tests applicable for determining the compatibility of geotextiles with various types of water-saturated soils under unidirectional flow conditions.
1.2Two evaluation methods may be used to investigate soil-geotextile filtration behavior, depending on the soil type:
1.2.1For soils with a plasticity index lower than 5, the systems compatibility shall be evaluated per this standard.
1.2.2For soils with a plasticity index of 5 or more, it is recommended to use Test Method D5567 (‘HCR,’ Hydraulic Conductivity Ratio) instead of this test method.
1.2.3If the plasticity index of the soil is close to 5, the involved parties shall agree on the selection of the appropriate method prior to conducting the test. This task may require comparison of the permeability of the soil-geotextile system to the detection limits of the HCR and Gradient Ratio Test (GRT) test apparatus being used.
1.3The values stated in SI units are to be regarded as standard. The values in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 5819 : 2022 | Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability |
| ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
| ASTM D 1987 : 2022 | Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters |
| ASTM D 2434 : 2022 | Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils |
| ASTM D 6917 : 2016 : R2022 | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
| ASTM D 6917 : 2016 | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
| ASTM D 5819 : 2018 | Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability |
| ASTM D 1987 : 2018 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
| ASTM D 7664 : 2010 : R2018 : EDT 1 | Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils |
| ASTM D 2216 : 2005 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 5101 : 1999 | Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio |
| ASTM D 422 : 1963 : R2002 : EDT 1 | Standard Test Method for Particle-Size Analysis of Soils |
| ASTM D 4647 : 1993 : R2006 | Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 4220 : 1995 : R2000 | Standard Practices for Preserving and Transporting Soil Samples |
| ASTM D 2487 : 2017 : EDT 1 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 5567 : 1994 : R2001 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 737 : 2018 : R2023 | Standard Test Method for Air Permeability of Textile Fabrics |
| ASTM D 653 : 2007 | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM D 4354 : 2012 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
| ASTM D 4751 : 2016 : REDLINE | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 2216 : 2010 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 5084 : 2016 : REV A | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 5567 : 1994 : R1999 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 4318 : 2005 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM D 698 : 2000 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
| ASTM D 422 : 1963 : R2007 : EDT 1 | Standard Test Method for Particle-Size Analysis of Soils |
| ASTM D 4220 : 1995 : R2007 | Standard Practices for Preserving and Transporting Soil Samples |
| ASTM D 4491 : 1999 : REV A : R2009 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 2488 : 1969 : R1975 | Recommended Practice for Description Of Soils (Visual-Manual Procedure) |
| ASTM D 5084 : 2003 | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 854 : 2014 | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| ASTM D 698 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
| ASTM D 1587 : 2008 : R2012 : EDT 1 | Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes |
| ASTM D 4354 : 2012 : R2020 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing |
| ASTM D 4751 : 2021 | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 2488 : 2017 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedures) |
| ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
| ASTM D 4318 : 2010 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM D 4318 : 2000 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
| ASTM D 4751 : 1999 : REV A | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 4751 : 2004 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 854 : 2014 : REDLINE | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| ASTM D 4491 : 1999 : REV A : R2004 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
| ASTM D 698 : 2013-05 | TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3])) |
| ASTM D 737 : 2018 | Standard Test Method for Air Permeability of Textile Fabrics |
| ASTM D 653 : 2022 | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM D 1587 : 2008 | Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes |
| ASTM D 653 : 2020 : EDT 1 | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM D 4751 : 1999 : REV A : R2004 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 5101 : 2012 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 4751 : 2021 : REV A | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 5084 : 2016 | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 4647 : 1993 : R1998 : EDT 1 | Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
| ASTM D 5101 : 2012 | TEST METHOD FOR MEASURING THE FILTRATION COMPATIBILITY OF SOIL-GEOTEXTILE SYSTEMS |
| ASTM D 4491 : 1999 : REV A : R2014 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 2488 : 2009 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) |
| ASTM D 5084 : 2010 | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 653 : 2021 : REV A | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM D 2216 : 2019 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 4318 : 2017 : EDT 1 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM D 5567 : 1994 : R2006 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 4647 : 2006 | Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
| ASTM D 2488 : 2000 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) |
| ASTM D 2487 : 2006 : EDT 1 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 653 : 2021 | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM D 4751 : 2012 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 5567 : 1994 : R2018 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 653 : 2021 : REV B | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
| ASTM D 4318 : 2010 : EDT 1 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM D 4354 : 1999 : R2009 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 4354 : 2012 : REDLINE | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
| ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
| ASTM D 4354 : 1999 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
| ASTM D 4318 : 2017 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
| ASTM D 5084 : 2000 | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 2487 : 2010 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 4439 : 2017-08 | TERMINOLOGY FOR GEOSYNTHETICS |
| ASTM D 2216 : 1998 | Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 2487 : 2000 | Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 4751 : 2020 : REV B | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 4751 : 2016 | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 4647 : 2006 : EDT 1 | Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
| ASTM D 2487 : 2006 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 2216 : 1971 | Standard Method of Laboratory Determination Of Moisture Content Of Soil |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 2487 : 2011 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 4491 : 1999 : REV A | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 4491 : 1999 : REV A : R2004 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 4354 : 1999 : R2004 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 1587 : 2000 | Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes |
| ASTM D 2487 : 2017 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 2488 : 2009 : REV A | Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) |
| ASTM D 2488 : 2017 : EDT 1 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedures) |
| ASTM D 5084 : 2000 : EDT 1 | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 2488 : 2006 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) |
| ASTM D 2487 : 1969 : R1975 | Standard Test Method for Classification Of Soils For Engineering Purposes |
| ASTM D 737 : 2004 | Test Method for Air Permeability of Textile Fabrics |
| ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
| ASTM D 698 : 2012 : EDT 2 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
| ASTM D 5567 : 1994 : R2011 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 5101 : 2001 | Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.