ASTM D 5055 : 2019 : EDT 1
Current
The latest, up-to-date edition.
Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
Hardcopy , PDF
English
28-01-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 07
|
| DocumentType |
Standard
|
| Pages |
38
|
| ProductNote |
Corrected editorially in January 2020.
This standard is also refers to PS-1,PS-2,PS-20,SPS-1,SPS-4. |
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1General—This specification gives procedures for establishing, monitoring, and reevaluating structural capacities of prefabricated wood I-joists. Capacities considered are shear, reaction, moment, and stiffness. Procedures for establishing common details are given and certain design considerations specific to wood I-joists are itemized.
1.2Contents of the Standard—An index and brief description of the main features of this specification are given in X2.1.1.
1.3Development of the Standard—The development and intent of this specification is discussed in Appendix X2.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in 6.1.1.5.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7147 : 2011 : R2018 | Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers |
| ASTM D 8391 : 2022 : EDT 1 | Standard Specification for Demonstrating Equivalent Fire Performance for Wood-Based Floor Framing Members to Unprotected 2 by 10 Dimension Lumber or Equal-Sized Structural Composite Lumber |
| ASTM D 7147 : 2021 | Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers |
| ASTM D 7290 : 2006 : R2022 | Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications |
| ASTM D 5457 : 2023 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 7672 : 2019 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
| ASTM D 7290 : 2006 : R2017 | Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications |
| ASTM D 2559 : 2012 : REV A : R2018 | Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions |
| ASTM D 6555 : 2017 | Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies |
| ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 5457 : 2023 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 7480 : 2021 | Standard Guide for Evaluating the Attributes of a Forest Management Plan |
| ASTM D 245 : 2022 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
| ASTM D 245 : 2006 : R2019 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
| ASTM D 5456 : 2021 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 198 : 2021 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 5457 : 2021 : REV A | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 4761 : 2005 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 5456 : 2011 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2915 : 2017 : R2022 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 1990 : 2019 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 198 : 2021 : REV A | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 2559 : 2012 : REV A : R2024 | Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions |
| ASTM D 1990 : 2024 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM D 198 : 2022 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 7480 : 2008 : R2014 | Standard Guide for Evaluating the Attributes of a Forest Management Plan |
| ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5457 : 2020 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 5457 : 2021 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 5456 : 2019 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 198 : 2022 : REV A | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 198 : 2015 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM E 4 : 2024 | Standard Practices for Force Calibration and Verification of Testing Machines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.