ASTM D 5011 : 2017
Current
The latest, up-to-date edition.
Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
Hardcopy , PDF
English
01-10-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 22
|
| DocumentType |
Standard Practice
|
| Pages |
29
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These practices describe means for calibrating ambient, workplace or indoor ozone monitors, using transfer standards.
1.2These practices describe five types of transfer standards:
Practice A—Analytical instruments,
Practice B—Boric acid potassium iodide (BAKI) manual analytical procedure,
Practice C—Gas phase titration with excess nitric oxide,
Practice D—Gas phase titration with excess ozone, and
Practice E—Ozone generator device.
1.3These practices describe procedures to establish the authority of transfer standards: qualification, certification, and periodic recertification.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 8 for specific precautionary statements.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5110 : 1998 : R2017 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 5149 : 2002 : R2016 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
| ASTM D 5156 : 2002 : R2016 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
| ASTM D 7439 : 2014 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
| ASTM D 8406 : 2022 | Standard Practice for Performance Evaluation of Ambient Outdoor Air Quality Sensors and Sensor-based Instruments for Portable and Fixed-point Measurement |
| ASTM D 5156 : 2022 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
| ASTM D 7439 : 2021 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
| ASTM D 5149 : 2024 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
| ASTM D 1356 : 2020 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 3824 : 1995 : R2000 | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
| ASTM D 1071 : 2017 | Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples |
| ASTM D 3195 : 1990 : R2004 | Standard Practice for Rotameter Calibration |
| ASTM D 1071 : 1983 : R2003 | Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples |
| ASTM D 5110 : 2022 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM E 591 : 1980 | Practice for Safety and Health Requirements Relating to Occupational Exposure to Ozone (Withdrawn 1990) |
| ASTM D 1356 : 2015 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 3249 : 1995 : R2011 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM D 3249 : 1995 : R2000 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM D 4230 : 2002 | Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
| ASTM D 5110 : 1998 : R2010 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 5110 : 1998 : R2004 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 3824 : 1995 : R2005 | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
| ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 3631 : 1999 : R2004 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 1356 : 2015 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 5110 : 2022 : REV A | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 4230 : 2002 : R2007 | Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
| ASTM D 1071 : 1983 : R1998 | Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 3249 : 1995 : R2005 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM D 5110 : 1998 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 4230 : 2002 : R2012 | Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
| ASTM D 1356 : 2014 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 3824 : 2020 | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by Chemiluminescence |
| ASTM D 3631 : 1999 : R2007 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 3249 : 1995 : R2019 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM D 5110 : 1998 : R2017 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 3631 : 1999 : R2011 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 4230 : 1983 : R1996 : EDT 1 | Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
| ASTM D 1356 : 2015 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 4230 : 2002 : EDT 1 | Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
| ASTM D 1356 : 2005 : R2010 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1356 : 2020 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1356 : 2000 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1356 : 2014 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1356 : 2014 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1356 : 2005 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 3824 : 2012 | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 1071 : 1983 : R2008 | Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples (Withdrawn 2017) |
| ASTM D 3631 : 1999 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 3631 : 1999 : R2017 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 3195 : 1990 : R1998 : EDT 1 | Standard Practice for Rotameter Calibration |
| ASTM D 1071 : 1983 : R1998 : EDT 1 | Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples |
| ASTM D 4230 : 2020 | Standard Test Method for Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.