ASTM D 4838 : 1988 : R2016
Current
The latest, up-to-date edition.
Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints (Withdrawn 2023)
Hardcopy , PDF
English
11-07-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 06.02, 2017 Specifies the determination of the absorption tinting strength of a chromatic test paint relative to that of a standard or reference paint of the same chemical type.
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2016
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method describes the determination of the absorption tinting strength of a chromatic test paint relative to that of a standard or reference paint of the same chemical type. The procedures are based on dilution of the paints with a standard mixing white paint, followed by instrumental measurement and calculation. Provision is made for correcting the results for small differences in hue or chroma, or both, between the test and reference chromatic paints.
1.2This test method is intended for the comparison of paints containing the same type of vehicle (acrylic, alkyd, or oil) and single-pigment colorants of the same Colour Index2 name and number. The amounts of the pigment and of the other components of the paint need not be known.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 2066 : 2007 : R2020 | Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
| ASTM D 5098 : 2016 : R2021 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 4941 : 2006 : R2021 | Standard Practice for Preparing Drawdowns of Artists’ Paste Paints |
| ASTM D 4302 : 2014 : R2021 | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 4302 : 2014 | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 5098 : 2016 | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 387 : 2000 : R2017 | Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023) |
| ASTM D 2066 : 2007 : R2012 | Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
| ASTM D 4941 : 2006 : R2016 | Standard Practice for Preparing Drawdowns of Artists’ Paste Paints |
| ASTM D 4303 : 2003 | Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
| ASTM E 1164 : 2007 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 4303 : 1999 | Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints |
| ASTM E 1164 : 2009 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 284 : 2022 | Standard Terminology of Appearance |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM D 1640 : 1983 : R1989 : EDT 1 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 4303 : 2010 : R2022 | Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
| ASTM D 4303 : 2010 : R2016 | Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
| ASTM E 1164 : 2012 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 4303 : 2006 | Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
| ASTM E 1164 : 1994 | Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation |
| ASTM D 1640 : 2003 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 4303 : 2010 | Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
| ASTM D 1640 : 1995 : R1999 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM E 308 : 2018 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM E 1164 : 2002 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1164 : 2012 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 1640 : 2003 : R2009 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM E 308 : 2022 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM E 1164 : 2012 : R2017 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 284 : 2017 | Standard Terminology of Appearance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.