ASTM D 4751 : 2021 : REV A
Current
The latest, up-to-date edition.
Standard Test Methods for Determining Apparent Opening Size of a Geotextile
Hardcopy , PDF
English
23-09-2021
Committee |
D 35
|
DocumentType |
Test Method
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1These test methods cover the determination of the apparent opening size (AOS) of a geotextile either by dry-sieving glass beads through a geotextile (Methods A1 and A2) or by using a capillary porometer (Method B).
1.2Method B will not be used in lieu of Method A unless the pre-qualification procedure specified in this standard is followed.
1.3These test methods show the values in both SI units and inch-pound units. SI units is the technically correct name for the system of metric units known as the International System of Units. Inch-pound units is the technically correct name for the customary units used in the United States. The values in inch-pound units are provided for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 8102 : 2017 | Standard Practice for Manufacturing Quality Control of Geotextiles |
ASTM D 7273/D7273M : 2008 : R2020 | Standard Guide for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
ASTM E 2777 : 2020 | Standard Guide for Vegetative (Green) Roof Systems |
ASTM D 5567 : 1994 : R2018 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
ASTM D 6389 : 2017 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
ASTM D 7178 : 2016 : EDT 1 | Standard Practice for Determining the Number of Constrictions “<emph type="bdit" >m</emph>” of Non-Woven Geotextiles as a Complementary Filtration Property |
ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
ASTM D 7001 : 2020 | Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications |
ASTM D 7351/D7351M : 2021 | Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications |
ASTM D 6917 : 2016 | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
ASTM D 6461/D6461M : 2018 | Standard Specifications for Silt Fence Materials |
ASTM D 6707/D6707M : 2006 : R2019 | Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications |
ASTM D 6685 : 2001 : R2015 | Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC) (Withdrawn 2024) |
ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM E 11 : 2024 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 1776/D1776M : 2020 | Standard Practice for Conditioning and Testing Textiles |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 1331 : 2020 | Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials |
ASTM D 4439 : 2024 : REV A | Standard Terminology for Geosynthetics |
ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 4439 : 2024 : EDT 1 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2024 | Standard Terminology for Geosynthetics |
ASTM D 1776/D1776M : 2020 : R2024 | Standard Practice for Conditioning and Testing Textiles |
ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
ASTM D 1331 : 2020 : R2024 | Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials |
ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.