ASTM D 4734 : 2018 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Refined Benzene-545
Hardcopy , PDF
06-05-2020
English
01-11-2018
This specification covers benzene-545.
Committee |
D 16
|
DocumentType |
Standard
|
Pages |
2
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers benzene-545.
1.2The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit in accordance with the rounding-off method in Practice E29.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4Consult current OSHA regulations, supplier’s Safety Data Sheets, and local regulations for all materials used in this specification.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 4735 : 2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 4790 : 2014 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
ASTM D 5776 : 2013 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
ASTM D 4492 : 1998 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM D 7183 : 2012 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 7504 : 2009 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7504 : 2015 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 6875 : 2003 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
ASTM E 1064 : 2012 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
ASTM D 7184 : 2013 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
ASTM D 5776 : 2014 : REV A | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
ASTM D 4735 : 2002 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 1492 : 2013 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
ASTM D 8005 : 2018 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 7504 : 2015 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM E 2680 : 2016 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 7504 : 2016 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7360 : 2011 | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration |
ASTM D 3437 : 1999 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM E 1064 : 2000 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
ASTM D 5386 : 2004 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 1492 : 2007 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
ASTM E 1064 : 2005 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
ASTM D 7504 : 2012 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 5776 : 2007 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
ASTM D 7183 : 2016 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 4735 : 2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 7184 : 2012 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
ASTM E 1064 : 2004 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
ASTM D 7183 : 2018 : REV A : EDT 1 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 7011 : 2010 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 7183 : 2018 : REV A | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 7183 : 2007 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 3437 : 2010 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 7184 : 2015 : R2019 : EDT 1 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
ASTM D 4492 : 2003 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM E 2680 : 2009 : EDT 1 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 1492 : 2002 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
ASTM D 7504 : 2009 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 1492 : 2008 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
ASTM D 4735 : 2009 : R2014 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 6875 : 2012 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
ASTM D 8005 : 2015 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 7504 : 2011 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7011 : 2015 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 7504 : 2017 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7011 : 2004 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 7184 : 2015 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
ASTM E 2680 : 2009 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 7183 : 2007 : EDT 1 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM E 1064 : 2008 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
ASTM D 5386 : 2005 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 6875 : 2008 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
ASTM E 2680 : 2009 : R2015 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
ASTM D 5776 : 2014 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
ASTM D 7504 : 2010 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 4492 : 2010 | Standard Test Method for Analysis of Benzene by Gas Chromatography (Withdrawn 2018) |
ASTM D 3437 : 2011 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 3437 : 2008 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 3437 : 2003 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 5386 : 1993 : REV B : R2000 : EDT 1 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 5776 : 2007 : EDT 1 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
ASTM E 1064 : 2004 : REV A | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
ASTM D 5776 : 2007 : R2012 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
ASTM D 1492 : 1978 : R1984 : EDT 1 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
ASTM D 5386 : 2016 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 7011 : 2010 : REV A | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 7360 : 2016 | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration (Withdrawn 2023) |
ASTM D 6875 : 2018 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
ASTM D 4492 : 2007 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM D 7183 : 2018 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 4735 : 2009 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 7183 : 2015 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
ASTM D 5776 : 1999 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
ASTM D 7184 : 2007 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence |
ASTM D 5386 : 2010 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 1492 : 1996 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
ASTM D 1492 : 2008 : EDT 1 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
ASTM E 1064 : 2016 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
ASTM D 4735 : 1996 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 4735 : 2015 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 7504 : 2018 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM D 7504 : 2017 : REV A | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
ASTM E 2680 : 2009 : R2015 : EDT 1 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.