ASTM D 4685/D4685M : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Pile Fabric Abrasion
Hardcopy , PDF
24-11-2020
English
01-08-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method covers the determination of the abrasion of pile fabrics when the loss of pile tuffs occur, sometimes called pile retention or pile pull out. It includes two procedures: 1.1.1Procedure A—The “Heavy Duty” procedure describes the test option for fabrics over 240 g/m2 (7 oz/yd2) or fabrics which should meet heavy duty end-use conditions of wear.
| Committee |
D 13
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the abrasion of pile fabrics when the loss of pile tuffs occur, sometimes called pile retention or pile pull out. It includes two procedures:
1.1.1Procedure A—The “Heavy Duty” procedure describes the test option for fabrics over 240 g/m2 (7 oz/yd2) or fabrics which should meet heavy duty end-use conditions of wear.
1.1.2Procedure B—The “Light Duty” procedure describes the test option for fabrics under 240 g/m2 (7 oz/yd2) or fabrics which should meet light duty end-use conditions of wear.
1.2The test method is intended for both regular, ribless woven corduroy or other woven pile fabric constructions.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 2724 : 2007 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 3884 : 1992 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 3884 : 2001 : EDT 1 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 4850 : 2002 | Standard Terminology Relating to Fabric |
| ASTM D 3884 : 2001 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 4850 : 2002 : REV A | Standard Terminology Relating to Fabric |
| ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
| ASTM D 4850 : 2003 : REV A : R2007 | Standard Terminology Relating to Fabric |
| ASTM D 2724 : 2003 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 4850 : 2008 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 4850 : 2013 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 2724 : 1987 : R1995 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 4850 : 2012 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3884 : 2009 : R2013 : EDT 1 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3884 : 2001 : R2007 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 4850 : 2013 : R2017 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 2724 : 1987 : R2003 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 4850 : 2008 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 4850 : 2003 | Standard Terminology Relating to Fabric |
| ASTM D 4850 : 2013 : R2017 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 4850 : 2000 : REV A | Standard Terminology Relating to Fabric |
| ASTM D 3884 : 2007 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 3884 : 2009 : R2017 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 3884 : 2009 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 2724 : 2007 : R2011 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 2724 : 2019 | Standard Test Method for Bond Strength of Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 4850 : 2003 : REV A | Standard Terminology Relating to Fabric |
| ASTM D 2724 : 2007 : R2015 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 2724 : 2007 : R2011 : EDT 1 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 3884 : 2009 : R2013 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 4850 : 2013 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.