ASTM D 4533/D4533M : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Trapezoid Tearing Strength of Geotextiles
Hardcopy , PDF
24-06-2023
English
20-02-2015
This test method is an index test used to measure the force required to continue or propagate a tear in woven or non-woven geotextiles by the trapezoid method.
Committee |
D 35
|
DocumentType |
Test Method
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method is an index test used to measure the force required to continue or propagate a tear in woven or non-woven geotextiles by the trapezoid method. While useful for quality control and acceptance testing, the trapezoid tear test does not provide all the information needed for all design applications and other test methods should be used.
1.2This test method is applicable to most geotextiles that include woven fabrics, nonwoven fabrics, layered fabrics, knit fabrics, and felts that are used for geotextile applications.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 8257/D8257M : 2022 | Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing |
ASTM D 6461/D6461M : 2022 | Standard Specifications for Silt Fence Materials |
ASTM D 6684 : 2018 | Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems |
ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
ASTM D 5884/D5884M : 2004 : REV A : R2015 : EDT 1 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
ASTM D 7273/D7273M : 2008 : R2020 | Standard Guide for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
ASTM D 7008 : 2008 : R2022 | Standard Specification for Geosynthetic Alternate Daily Covers |
ASTM D 7001 : 2020 | Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications |
ASTM D 6917 : 2016 : R2022 | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM D 4354 : 2012 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
ASTM D 4354 : 2012 : R2020 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
ASTM D 2905 : 1997 | Standard Practice for Statements on Number of Specimens for Textiles |
ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 76/D76M : 2021 | Standard Specification for Tensile Testing Machines for Textiles |
ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 76/D76M : 2011 : R2016 | Standard Specification for Tensile Testing Machines for Textiles |
ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
ASTM D 4354 : 1999 : R2009 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 4354 : 1999 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
ASTM D 4354 : 1999 : R2004 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.