ASTM D 4389/D4389M : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Finished Glass Fabrics Woven From Rovings
Hardcopy , PDF
26-08-2023
English
26-02-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 13
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification primarily covers glass fabrics woven from “E” electrical continuous glass fiber rovings that are intended primarily as a reinforcing material in laminated plastics for structural use.
1.2This specification specifies the terminology, definitions, general requirements, and physical requirements for woven roving glass fiber fabrics. This specification permits the application of sizing materials to the glass fiber roving during manufacture that helps facilitate weaving. When used as permitted in this specification, such materials are compatible with the resin matrix as specified in the contracting instrument.
Note 1:Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure, they need not be compatible with the subsequent resin matrix.
1.3Units—The values stated in either SI units or inch-pound units are to be regarded as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
Note 2:This specification is one of a series to provide a substitute for the following Military Specifications:
MIL-Y-1140H Yarn, Cord, Sleeving, Cloth, and Tape-Glass
MIL-C-9084C Cloth, Glass Finished for Resin Laminates
MIL-C-19663C Cloth, Glass, Woven Roving for Plastic Laminates
| ASTM F 2881/F2881M : 2021 : EDT 1 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| ASTM D 3098 : 1984 | Method of Test for Finish Content of Woven Glass Fabrics, Cleaned and After-Finished with Epoxy-Functions Silane Type Finishes for Plastic Laminates (Withdrawn 1988) |
| ASTM D 3774 : 1996 : R2012 | Standard Test Method for Width of Textile Fabric |
| ASTM D 2410 : 1982 | Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Chrome Complexes, for Plastic Laminates (Withdrawn 1988) |
| ASTM D 3774 : 1996 : R2004 | Standard Test Methods for Width of Textile Fabric |
| ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3776 : 2007 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
| ASTM D 3776 : 1996 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D 2408 : 1982 | Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Amino-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988) |
| ASTM D 3774 : 1996 : R2008 : EDT 2 | Standard Test Method for Width of Textile Fabric |
| ASTM D 3773 : 2007 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 3775 : 2017 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
| ASTM D 2409 : 1984 | Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Vinyl-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988) |
| ASTM D 3774 : 1996 : R2008 : EDT 1 | Standard Test Methods for Width of Textile Fabric |
| ASTM D 4029 : 2009 | Standard Specification for Finished Woven Glass Fabrics |
| ASTM D 3775 : 1998 | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 3776 : 2009 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3775 : 2002 | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3775 : 2007 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 4029 : 1997 | Standard Specification for Finished Woven Glass Fabrics |
| ASTM D 3774 : 2018 | Standard Test Method for Width of Textile Fabric |
| ASTM D 4029 : 2004 | Standard Specification for Finished Woven Glass Fabrics |
| ASTM D 3773 : 1990 : R2002 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 3775 : 2012 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 3775 : 2003 : REV A | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 4963 : 1999 | Standard Test Method for Ignition Loss of Glass Strands and Fabrics |
| ASTM D 3775 : 2007 : REV A | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 3775 : 2017 : EDT 1 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
| ASTM D 4963 : 2004 | Standard Test Method for Ignition Loss of Glass Strands and Fabrics |
| ASTM D 3774 : 1996 | Standard Test Methods for Width of Textile Fabric |
| ASTM D 3775 : 2017 : R2023 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
| ASTM D 3775 : 2008 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 3774 : 1996 : R2016 | Standard Test Method for Width of Textile Fabric |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 7018 : 2004 | Standard Terminology Relating to Glass Fiber and Its Products |
| ASTM D 3773 : 1990 : R1996 : EDT 1 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 3775 : 2003 | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 2660 : 1984 | Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Acrylic-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.