ASTM D 4266 : 2017
Current
The latest, up-to-date edition.
Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
Hardcopy , PDF
English
01-06-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 19
|
| DocumentType |
Test Method
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the determination of the operating ion-exchange capacity of both powdered cation-exchange resins (hydrogen form) and powdered anion-exchange resins (hydroxide form). These test methods are intended for use in testing new powdered ion-exchange resins when used for the treatment of water. The following two test methods are included:
| Sections | |
| Test Method A—Operating Capacity, Anion-Exchange | 7 to 15 |
| Test Method B—Operating Capacity, Cation-Exchange | 16 to 24 |
1.2The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2687 : 1995 : R2016 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
| ASTM D 5391 : 2023 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
| ASTM D 2687 : 1995 : R2024 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 1125 : 2014 | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
| ASTM D 4456 : 1999 | Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
| ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
| ASTM D 4456 : 1999 : R2009 : EDT 1 | Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
| ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 5391 : 1999 : R2005 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 2687 : 1995 : R2001 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 5391 : 1999 : R2009 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
| ASTM D 4456 : 1999 : R2005 | Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
| ASTM E 200 : 2016 | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM D 5391 : 2014 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023) |
| ASTM D 1125 : 1995 : R1999 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM E 200 : 2023 | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM D 4456 : 2017 | Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
| ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
| ASTM D 1125 : 1995 : R2005 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
| ASTM D 1125 : 2023 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 5391 : 1999 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 1125 : 1995 : R2009 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
| ASTM D 2687 : 1995 : R2007 : EDT 1 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.