ASTM D 4230 : 2002 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
Hardcopy , PDF
11-11-2014
English
10-10-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 11.03, 2017 Describes the thermodynamic dew- or frost-point temperature of ambient air by the condensation of water vapor on a cooled surface.
| Committee |
D 22
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method covers the determination of the thermodynamic dew- or frost-point temperature of ambient air by the condensation of water vapor on a cooled surface. For brevity this is referred to in this method as the condensation temperature.
1.2 This test method is applicable for the range of condensation temperatures from 60°C to -70°C.
1.3 This test method includes a general description of the instrumentation and operational procedures, including site selection, to be used for obtaining the measurements and a description of the procedures to be used for calculating the results.
1.4 This test method is applicable for the continuous measurement of ambient humidity in the natural atmosphere on a stationary platform.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 8.
| ASTM D 5527 : 2000 : R2011 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D 5527 : 2000 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| 11/30239716 DC : 0 | BS EN 16242 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| BS EN 16242:2012 | Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| ASTM D 5527 : 2000 : R2017 : EDT 1 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM B 827:2005 | Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests |
| ASTM B 827 : 2005 : R2009 : EDT 1 | Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests |
| DIN EN 16242:2013-03 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| I.S. EN 16242:2012 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| CGSB 4.2-49 : 1999(R2013) | TEXTILE TEST METHODS - RESISTANCE OF MATERIALS TO WATER VAPOUR DIFFUSION |
| ASTM B 827 : 2005 : R2014 | Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests |
| ACI 548.10 : 2010 | SPECIFICATION FOR TYPE MMS (METHYL METHACRYLATE SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS |
| ACI SPEC-548.10 : 2010 | SPECIFICATION FOR TYPE MMS (METHYL METHACRYLATE SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS |
| ASTM D 5595 : 1994 | Standard Practice for Determining Buoyancy Corrections During Precision Weighing of Low-Density Samples (Withdrawn 1997) |
| ASTM F 2524 : 2006 | Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications |
| UNI EN 16242 : 2013 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| ASTM E 337 : 2015 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 5011 : 2017 | Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
| ASTM D 5527 : 2000 : R2007 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 5527 : 2000 : R2002 : EDT 1 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| UNE-EN 16242:2014 | Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| ASTM F 2524 : 2006 : R2013 | Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications |
| ASTM B 827 : 2005 : R2009 : EDT 2 | Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests |
| ASTM D 5011 : 2017 : REDLINE | Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.