• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 4171 : 2016 : REV A

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Fuel System Icing Inhibitors

Available format(s)

Hardcopy , PDF

Superseded date

22-04-2021

Superseded by

ASTM D 4171 : 2021

Language(s)

English

Published date

18-01-2017

£57.59
Excluding VAT

Committee
D 02
DocumentType
Standard
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This specification covers additives for aviation fuels (for example, Specifications D910, D7547, and D1655) used to inhibit ice formation in aircraft fuel systems.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3WARNING —Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website—http://www.epa.gov/mercury/faq.htm—for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 5006 : 2011 : R2016 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 6615 : 2015 : REV A Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 8147 : 2017 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
ASTM D 7566 : 2019 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 7223 : 2017 Standard Specification for Aviation Certification Turbine Fuel
ASTM D 910 : 2017 : REV A Standard Specification for Leaded Aviation Gasolines
ASTM D 6227 : 2018 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D 7547 : 2018 : REV A Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 7960 : 2018 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
ASTM D 7719 : 2018 Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
ASTM D 7618 : 2013 : R2017 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
ASTM D 4485 : 2020 Standard Specification for Performance of Active API Service Category Engine Oils
ASTM D 6615 : 2015 : REV A : R2019 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 7566 : 2020 : REV C Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 910 : 2020 : REV A Standard Specification for Leaded Aviation Gasolines
ASTM D 1655 : 2020 : REV D Standard Specification for Aviation Turbine Fuels

ASTM D 1655 : 2008 : REV A Standard Specification for Aviation Turbine Fuels
ASTM E 2877 : 2012 : EDT 1 Standard Guide for Digital Contact Thermometers
ASTM D 3828 : 2002 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM E 1064 : 2012 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 1655 : 2011 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1353 : 2009 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D 1655 : 2012 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2006 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 1996 : R2002 : EDT 1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 3828 : 2012 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1078 : 1999 Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM D 3828 : 1998 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 1296 : 2001 Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM D 1655 : 2006 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 268 : 2001 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
ASTM D 1655 : 2018 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2005 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 3828 : 2007 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1209 : 2000 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 1655 : 2014 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1078 : 2003 Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM E 1064 : 2000 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E 2251 : 2007 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 1655 : 2001 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2011 : REV A Standard Specification for Aviation Turbine Fuels
ASTM E 1064 : 2005 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 7547 : 2011 Standard Specification for Unleaded Aviation Gasoline
ASTM D 1722 : 2009 Standard Test Method for Water Miscibility of Water-Soluble Solvents
ASTM D 7547 : 2012 Standard Specification for Hydrocarbon Only Unleaded Aviation Gasoline
ASTM E 2251 : 2003 : REV A Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 3828 : 2007 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1655 : 2006 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 2009 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 7547 : 2018 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM E 1064 : 2004 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 1613 : 1996 : R1999 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1655 : 2015 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2008 Standard Specification for Aviation Turbine Fuels
ASTM D 1613 : 2003 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1655 : 2002 Standard Specification for Aviation Turbine Fuels
ASTM D 1296 : 2001 : R2012 Standard Test Method for Odor of Volatile Solvents and Diluents (Withdrawn 2021)
ASTM D 1655 : 2006 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2016 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2010 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 : REV A Standard Specification for Aviation Turbine Fuels
ASTM E 2251 : 2003 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 1655 : 2000 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 7547 : 2018 : REV A Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 1655 : 2015 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 7547 : 2009 Standard Specification for Unleaded Aviation Gasoline
ASTM D 93 : 1990 : EDT 1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM D 5006 : 2003 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 3828 : 2012 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1353 : 2003 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D 1655 : 2015 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2007 Standard Specification for Aviation Turbine Fuels
ASTM D 7547 : 2013 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 4052 : 2011 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 910 : 2001 Standard Specification for Aviation Gasoline's
ASTM D 1476 : 2002 : R2007 Standard Test Method for Heptane Miscibility of Lacquer Solvents
ASTM D 1655 : 2015 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 2016 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E 2251 : 2010 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 1364 : 2002 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D 3828 : 2016 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1078 : 2005 Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM E 2251 : 2011 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM E 2877 : 2012 : R2019 Standard Guide for Digital Contact Thermometers
ASTM E 2251 : 2014 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 1655 : 2012 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 5006 : 2011 : R2016 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 1655 : 2014 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 1985 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2016 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 7547 : 2014 : REV A Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 1209 : 2005 : EDT 1 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 1353 : 1983 : EDT 1 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D 5006 : 1996 : R2001 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 1296 : 1993 : R1996 Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM E 1064 : 2008 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 5006 : 1996 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 1655 : 2004 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 7547 : 2017 : REV A Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 1655 : 2016 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1613 : 2002 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1613 : 2006 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 7547 : 2014 : REV B Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 1613 : 2006 : R2012 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1722 : 1998 Standard Test Method for Water Miscibility of Water-Soluble Solvents
ASTM D 1364 : 2002 : R2012 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method) (Withdrawn 2021)
ASTM D 4052 : 1996 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 3828 : 2005 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1364 : 1995 : R1999 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D 1655 : 2004 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2014 : REV C Standard Specification for Aviation Turbine Fuels
ASTM E 2877 : 2012 Standard Guide for Standard Guide for Digital Contact Thermometers
ASTM D 1655 : 2016 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2007 : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 93 : 2000 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 1655 : 2000 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2013 Standard Specification for Aviation Turbine Fuels
ASTM D 1296 : 2001 : R2007 Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM D 1655 : 2015 : REV D : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 1078 : 2011 : R2019 Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM E 1064 : 2004 : REV A Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 93 : 1985 Standard Test Method for Flash Point by Pensky-Martens Closed Tester
ASTM D 7547 : 2015 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 7547 : 2015 : EDT 1 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 1655 : 2006 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 3828 : 2009 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1655 : 2003 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1722 : 2009 : R2017 Standard Test Method for Water Miscibility of Water-Soluble Solvents
ASTM D 1078 : 2011 Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM D 1209 : 2005 : R2011 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 1476 : 2002 Standard Test Method for Heptane Miscibility of Lacquer Solvents
ASTM D 1655 : 2014 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2003 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2009 Standard Specification for Aviation Turbine Fuels
ASTM D 1476 : 1988 : R1996 Standard Test Method for Heptane Miscibility of Lacquer Solvents
ASTM D 5006 : 2002 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 1655 : 2011 Standard Specification for Aviation Turbine Fuels
ASTM D 56 : 1987 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D 1364 : 2002 : R2007 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D 7547 : 2014 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 7547 : 2017 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 1655 : 2020 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1209 : 2005 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 1655 : 2009 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1353 : 1996 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D 1655 : 2020 Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 2015 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1655 : 2018 Standard Specification for Aviation Turbine Fuels
ASTM D 5006 :2011 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 93 : 1997 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 5006 : 2010 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 1476 : 2002 : R2012 Standard Test Method for Heptane Miscibility of Lacquer Solvents (Withdrawn 2021)
ASTM D 5006 : 2010 : EDT 1 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 1078 : 2001 Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM D 1613 : 2017 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1353 : 2013 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D 1353 : 2002 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D 1655 : 2019 : REV A Standard Specification for Aviation Turbine Fuels
ASTM E 1064 : 2016 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 3828 : 2016 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1655 : 2013 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 2018 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1476 : 1988 : R2000 Standard Test Method for Heptane Miscibility of Lacquer Solvents
ASTM D 1209 : 2005 : R2019 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 3828 : 1997 Standard Test Methods for Flash Point by Small Scale Closed Tester

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.