ASTM D 3953 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Specification for Strapping, Flat Steel and Seals
Available format(s)
PDF
Superseded date
01-07-2015
Language(s)
English
Published date
01-07-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 15.09, 2015 Specifies flat steel strapping and seals intended for use in closing, reinforcing, bundling articles for shipment, unitizing, palletizing, and bracing for car-loading, truck-loading, lifting, and lashing.
| Committee |
D 10
|
| DevelopmentNote |
Supersedes A A 2111. (05/2003) Supersedes A A 884 and A A 880. (08/2003) Supersedes QQ S 781 (H). (09/2004)
|
| DocumentType |
Redline
|
| Pages |
14
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| Supersedes |
1.1This specification covers flat steel strapping and seals intended for use in closing, reinforcing, bundling articles for shipment, unitizing, palletizing, and bracing for carloading, truckloading, lifting, and lashing.
1.2This specification includes strapping and seals made from carbon steel and applies only to the types and sizes as cataloged by strapping suppliers to be a standard, commercially available product. It does not include “specialty”-type strapping as developed for special applications or strapping produced from alloy metals.
1.3The values stated in inch-pound units are to be regarded as standard.
1.4Performance characteristics may be negatively affected by extremes of temperatures, such as occur during the annealing of steel.
1.5The following safety hazards caveat applies only to the test method portion, Sections 11, 12, and 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL-R-52915 Revision B:1994 | RECHARGE/RECOVERY UNIT, FIRE EXTINGUISHER, MONOBROMOTRIFLUOROMETHANE (CF3BR) PNEUMATIC POWERED |
| ASTM D 1974/D1974M : 2016 : REDLINE | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| MIL-K-52338 Revision B:1991 | KEEPER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL T 0022238 : J | TANK, LIQUID STORAGE, METAL, FOR PETROLEUM PRODUCTS |
| RR-F-191 Revision K:1990 | FENCING, WIRE AND POST METAL (AND GATES, CHAIN-LINK FENCE FABRIC, AND ACCESSORIES) (GENERAL SPECIFICATION) |
| MIL-DTL-14362 Revision H:2010 | LUMBER: UNITIZING AND LOADING OF |
| MIL-T-12173 Revision D:1992 | TRAVELLER, BICYCLE |
| MIL-S-52300 Revision D:1991 | SHOE ASSEMBLY, TRESTLE |
| MIL-L-11647 Revision E:1991 | LEVER, BALK DEPRESSING, CLAW BAR TYPE |
| MIL-DTL-12000 Revision K:2012 | CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF |
| AA-C-571 Revision H:1993 | COT, FOLDING |
| AA-B-2825 Base Document:1994 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS SINGLE AND DOUBLE-DECK |
| MIL-P-53124 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED |
| PPP-G-2919 Base Document:1997 | GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF |
| MIL DTL 46746 : E | CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-T-52369 Revision B:1991 | TOWER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL-T-12442 Revision D:1992 | TOWER, CABLE ANCHOR |
| MIL-C-104 Revision C:1992 | CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED |
| MIL C 12000 : H | CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF |
| MIL-P-52258 Revision C:1992 | PICKETS, STEEL |
| MIL-B-52118 Revision E:1991 | BALK DECK |
| MIL-B-55521 Revision C:1983 | BATTERIES, NONRECHARGEABLE, PACKING OF |
| MIL-R-52807 Revision B:1991 | ROLLER, TRANSOM, BAILEY BRIDGE |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL-H-3280 Revision E:1990 | HOIST, CHAIN, MANUALLY OPERATED, PACKAGING OF |
| MIL-DTL-2427 Revision J:2017 | Box, Ammunition Packing: Wood, Nailed |
| ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| MIL-STD-1816 Base Document:1992 | PRESERVATION, PACKAGING & PACKING OF RUBBER & NYLON FUEL, OIL & WATER-ALCOHOL CELLS |
| MIL M 62338 : A | MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) XM993, PROCESSING FOR STORAGE AND SHIPMENT OF |
| ASTM D 6255/D6255M:2005 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| ASTM D 6880/D6880M : 2011 : REDLINE | Standard Specification for Wood Boxes |
| ASTM D 5168 : 2012 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| NFPA 225 : 2017 | MODEL MANUFACTURED HOME INSTALLATION STANDARD |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
| MIL-STD-3003 Revision B:2007 | VEHICLES, WHEELED: PREPARATION FOR SHIPMENT AND STORAGE OF |
| MIL-A-0052767 Revision E:1994 | AIR CONDITIONERS: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-STD-769 Revision K:2015 | Insulation Requirements for U.S. Naval Vessels |
| MIL-STD-107 Revision J:2001 | PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
| MIL-DTL-53126 Revision A:2012 | Power Distribution, Illumination Systems, Electrical General Specification for |
| MIL-DTL-45360 Revision J:2016 | CARRIERS, PERSONNEL, FULL-TRACKED, ARMORED: M113A2 AND M113A3; MORTARS, SELF-PROPELLED: M106A2 (107MM), M125A2 (81MM) AND M1064, M1064A3 (120MM); SMOKE GENERATORS: M1059, M1059A3 AND M58; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-DTL-55507 Revision F:1997 | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT) PACKAGING OF |
| MIL-STD-2003-4 Revision A:2009 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLEWAYS) |
| MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
| MIL-E-52715 Revision C:1992 | ERECTION AND MAINTENANCE EQUIPMENT FOR CABLE REINFORCEMENT SET FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| MIL-B-52199 Revision C:1992 | BRACKET, OUTBOARD MOTOR, FOR ALUMINUM HALF PONTOON |
| MIL-A-52679 Revision B:1983 | ANCHOR, SURFACING MEMBRANE: 12 INCH |
| RR-W-410 Revision H:2015 | WIRE ROPE AND STRAND |
| MIL-DTL-62533 Revision A:1995 | CARRIER, CARGO, TRACKED, 22-TON, AMMUNITION MEDIUM: M992/A1/A2; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-S-12840 Revision H:1992 | SADDLE ASSEMBLY, STEEL AND PLYWOOD, FOR 24-TON, 2-PART PNEUMATIC FLOAT, PONTOON BRIDGE |
| MIL-STD-147 Revision E:2008 | PALLETIZED UNIT LOADS |
| MIL-T-52983 Revision G:1994 | TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL |
| MIL-PRF-52343 Revision D:1998 | REPAIR KIT, HOSELINE |
| MIL-DTL-62220 Revision C:1996 | RECOVERY VEHICLE, FULL-TRACKED, HEAVY, M88A2, PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-D-3344 Revision D:1990 | DIVING EQUIPMENT SET, TWO PERSONS 100 FOOT DEPTH, PACKAGING OF |
| MIL-DTL-62015 Revision G:1995 | CARRIER, CARGO, FULL-TRACKED, M548A1 AND M548A3 - PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-DTL-39028 Revision F:2013 | CAPACITORS, PACKAGING OF |
| A-A-52211 Base Document:1996 | STRETCHERS, STEEL, STRAPPING, HAND |
| MIL-DTL-75 Revision K:2007 | ELECTRON TUBES, PACKAGING OF |
| MIL-DTL-39032 Revision E:2000 | RESISTORS, PACKAGING OF |
| MIL-DTL-55330 Revision C:2001 | CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| MIL-C-3774 Revision B:1991 | CRATE, WOOD, OPEN 12,000 AND 16,000 POUND CAPACITY |
| MIL-C-52950 Revision A:1991 | CRATE, WOOD OPEN & COVERED |
| MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM F 2511 : 2005 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| ASTM D 7478/D7478M : 2011 : R2017 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| ASTM D 6255/D6255M : 2005 : R2011 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| MIL-B-52690 Revision B:1987 | BRACKET PUSHING, BOW ATTACHMENT, 12-TON PNEUMATIC HALF FLOAT |
| MIL-S-52098 Revision C:1992 | STIFFENER ASSEMBLY, BALK CONNECTING |
| ASTM D 6254/D6254M : 2013 : REDLINE | Standard Specification for Wirebound Pallet-Type Wood Boxes |
| MIL-T-52991 Revision A:1992 | TABLE, SCRIBING, TRACING, DRAFTING, FLIP TOP |
| MIL-HDBK-775 Base Document:1996 | FOAM-IN-PLACE PACKAGING, PROCEDURES FOR |
| MIL T 0053055 : B | TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL-C-9897 Revision C:1992 | CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS] |
| MIL-R-52224 Revision D:1992 | RETAINER ASSEMBLY SLIDING |
| MIL-F-3222 Revision F:1991 | FLOODLIGHTS AND LANTERNS, PACKAGING OF |
| MIL-T-52296 Revision D:1983 | TRANSOM ASSEMBLY, 60 TON UNIVERSAL TRANSOM |
| MIL-C-28688 Base Document:1990 | CABLE, FIBER OPTIC, PACKAGING OF |
| MIL E 55585 : F | ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF |
| MIL-F-52569 Revision C:1992 | FOOTWALK ASSEMBLY, ALUMINUM FOR BRIDGE BAILEY |
| MIL-B-52097 Revision B:1992 | BAR, CARRYING, MULTIPLE AND SINGLE M4 BALK |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL-H-10056 Revision F:1995 | HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-B-10122 Revision E:1991 | BARGE, LIQUID CARGO: NONPROPELLED, STEEL, OFFSHORE, 4,160-BARREL, 120-FOOT, DESIGN 231C |
| MIL-C-3580 Revision E:1991 | CRANES AND CRANE SHOVELS, TRUCK, CRAWLER, AND WHEEL MOUNTED FULL REVOLVING AND THEIR ATTACHMENTS, PACKAGING OF |
| MIL-STD-1660 Revision A:2008 | DESIGN CRITERIA STANDARD - AMMUNITION UNIT LOADS |
| MIL-P-52200 Revision C:1992 | PONTOON BOAT, HALF SECTION, ALUMINUM HULL, SPOON BOW |
| ASTM C 877 : 2016 : REDLINE | Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections |
| ASTM F 2511 : 2005 : EDT 1 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| ASTM A 700 : 2014 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
| MIL-B-29176 Revision B:1990 | BUILDING, PREFABRICATED, STEEL ARCH, DECONTAMINATION CENTER |
| AA-F-00360 Revision B Interim Revision:2002 | FILING CABINETS, STEEL, MAP AND PLAN, (SECTIONAL) |
| MIL-C-53109 Base Document:1990 | CAN, FUEL, MILITARY, PLASTIC, 5 GALLON CAPACITY |
| MIL-S-50786 Revision G:1993 | SKID BASE WOOD, FOR UNITIZATION OF BOXED AMMUNITION |
| MIL S 19491 : G | SEMICONDUCTOR DEVICE, PACKAGING OF |
| MIL-DTL-28786 Revision D:2014 | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| MIL-G-762 Revision E:1990 | GRADER, ROAD, PACKAGING OF |
| MIL-C-52299 Revision D:1991 | CLAMP ASSEMBLY, TRESTLE BRACING |
| SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| MIL-DTL-55425 Revision E:2011 | CABLE, TELEPHONE WF-16()/U |
| MIL-G-45811 Revision D:1992 | GAGE, AIR, LOW PRESSURE, PNEUMATIC FLOATING EQUIPMENT |
| MIL-A-52879 Revision C:1992 | Alarm, Audible, BZ-204/FSS-9(V) (No S/S Document) |
| MIL-B-28644 Revision A:1988 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS, SINGLE AND DOUBLE-DECK |
| NN-H-93 Revision C:1995 | HANDLE, HICKORY, STRIKING TOOL |
| FED-STD-802 Base Document:1991 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL-DTL-62327 Revision B:1985 | CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC) |
| MIL-S-10987 Revision E:1991 | SCALE, PLOTTING, COORDINATE (ALUMINUM, SQUARE, 1,25,000 SCALE AND 1,50,000 SCALE, GRADUATED IN METERS AND YARD) |
| MIL-C-11418 Revision H:1992 | CLAMPS, LEAK REPAIR, PIPE COUPLING; FOR USE OVER GROOVED-TYPE COUPLINGS |
| MIL-D-82062 Revision C:1992 | DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY |
| MIL-P-236 Revision J:1992 | PIPE, CULVERT, NESTABLE |
| A-A-52215 Base Document:1968 | STRAPPING AND SEALING KITS, HAND-OPERATED |
| MIL-T-425 Revision J:1994 | TUBE, STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| MIL-B-52088 Revision F:1992 | BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN |
| MIL-HDBK-774 Revision A:2004 | PALLETIZED UNIT LOADS |
| ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| MIL E 53126 : 0 | ELECTRICAL DISTRIBUTION EQUIPMENT |
| MIL-P-53123 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| MIL-S-52302 Revision D:1992 | STRUT, BRACING, TRESTLE |
| MIL-B-16041 Revision G:1993 | BUILDINGS, PREFABRICATED, READY-CUT, MAGAZINES, STEEL ARCH, 16- AND 25-FOOT SPAN (EXTENSIBLE) |
| PPP-F-00320 Revision E:1991 | FIBERBOARD: CORRUGATED AND SOLID, SHEET STOCK (CONTAINER GRADE) AND CUT SHAPES |
| ASTM D 7478/D7478M : 2011 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| MIL-C-14518 Revision E:1992 | CONNECTOR, BRIDLE LINE: SHEAVE TYPE |
| O-S-571 Revision G:1991 | SODIUM CARBONATE, ANHYDROUS, TECHNICAL |
| MIL-B-52293 Revision C:1992 | BRACKET, RAFT, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| MIL-P-11087 Revision G:1994 | PIPE, STEEL: GROOVED OR PLAIN ENDS |
| MIL-C-52464 Revision C:1992 | CYLINDER ASSEMBLIES, ACTUATING, LINEAR: HYDRAULIC FOR BRIDGE AND BRIDGE LAUNCHER |
| MIL-B-3180 Revision E:1990 | BOILERS AND RELATED EQUIPMENT; PACKAGING OF |
| MIL-T-52340 Revision B:1991 | TOOL, VERTICAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| MIL-E-52714 Revision C:1992 | EQUIPMENT, CABLE REINFORCEMENT FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| MIL-A-53129 Base Document:1992 | ALARM-MONITOR GROUP OA-9431/FSS-9(V) |
| PPP-B-2920 Base Document:1997 | BOILERS AND RELATED EQUIPMENT, PACKAGING OF |
| MIL-B-3865 Revision D:1990 | BLOCKS, ROPE, TACKLE: PACKAGING OF |
| MIL-C-10387 Revision J:1992 | COUPLINGS, CLAMP, PIPE; WITH BOLTS AND SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE |
| MIL-C-3779 Revision E:1991 | CASE, ENGINEER BATTALION, DRAFTING EQUIPMENT, CANVAS |
| MIL-D-771 Revision E:1990 | DISTRIBUTOR, BITUMEN AND WATER, PACKAGING OF |
| MIL-A-23987 Revision A:1989 | A-FRAME, PONTOON TUG: PREFABRICATED, KNOCKED DOWN |
| MIL-DTL-15011 Revision K:2013 | Pallets, Material Handling, Wood Post Construction, 4-Way Entry |
| MIL-T-10163 Revision E:1992 | TERRAIN MODELING KIT, TRAINING AID |
| MIL-B-14036 Revision E:1992 | BRACKET, OUTBOARD MOTOR: BOW ATTACHMENT; 12-TON PNEUMATIC HALF FLOAT |
| MIL-S-52159 Revision C:1994 | SLING, MULTIPLE LEG .625 INCH BY 6-FOOT CHAIN, WITH SPECIAL HOOKS AND RING |
| MIL-STD-1320 Revision D:2014 | FOR DESIGNING UNIT LOADS, TRUCKLOADS, RAILCAR LOADS, AND INTERMODAL LOADS FOR AMMUNITION AND EXPLOSIVES |
| MIL-B-2213 Revision D:1992 | BRIDGE CONVERSION SET, FIXED BRIDGE: BAILEY; CONSTRUCTION OF ONE PANEL CRIB PIER, 31 FEET 7 INCHES HIGH, 145-TON |
| MIL-P-52284 Revision C:1992 | POST, HANDRAIL, FOOTBRIDGE |
| MIL-P-12808 Revision F:1991 | PLUMBING FIXTURES AND ACCESSORIES, PACKAGING OF |
| ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| MIL-P-53125 Base Document:1992 | POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| MIL-P-52307 Revision B:1992 | PLOTTER, RECTANGULAR COORDINATES (COORDINATOGRAPH) |
| ASTM D 6573/D6573M : 2013 : REDLINE | Standard Specification for General Purpose Wirebound Shipping Boxes |
| MIL-P-710 Revision F:1990 | PUMP, DEEP WELL, PACKAGING OF |
| ASTM C 877M : 2016 : REDLINE | Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric) |
| ASTM B 660 : 2015 : REDLINE | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
| ASTM D 6251/D6251M : 2011 : REDLINE | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
| ASTM D 6256/D6256M : 2016 : REDLINE | Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases |
| ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| ASTM A 239 : 2014 : REDLINE | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles<sup>, </sup> |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 6880 : 2005 | Standard Specification for Wood Boxes |
| ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.