ASTM D 3950 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Strapping, Nonmetallic (and Joining Methods)
Hardcopy , PDF
02-11-2023
English
30-10-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers nonmetallic strapping and joining methods intended for use in closing, reinforcing, and bundling articles for shipment, unitizing, palletizing, and bracing for car loading and truck loading.
| Committee |
D 10
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers nonmetallic strapping and joining methods intended for use in closing, reinforcing, and bundling articles for shipment, unitizing, palletizing, and bracing for car loading and truck loading.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3The following safety hazards caveat pertains only to the test method portion, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 4675 : 2014 : REV A | Standard Guide for Selection and Use of Flat Strapping Materials<sup>1</sup> |
| ASTM B 660 : 2015 | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
| ASTM D 1974/D1974M : 2016 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM A 700 : 2014 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
| ASTM D 4675 : 2014 : REV A : R2022 | Standard Guide for Selection and Use of Flat Strapping Materials<sup>1</sup> |
| ASTM A 700 : 2014(R2019) | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
| ASTM D 4727/D4727M : 2022 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ASTM D 8505/D8505M : 2023 | Standard Specification for Basalt and Glass Fiber Reinforced Polymer (FRP) Bars for Concrete Reinforcement |
| ASTM D 5168 : 2022 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 1974/D1974M : 2022 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 5118/D5118M : 2022 | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| ASTM B 660 : 2021 | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
| ASTM D 5118/D5118M : 2015 | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| ASTM D 4727/D4727M : 2017 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
| ASTM D 996 : 2023 | Standard Terminology of Packaging and Distribution Environments |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM D 4332 : 2000 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 4332 : 2022 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 4332 : 2001 : EDT 1 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM D 996 : 2016 | Standard Terminology of Packaging and Distribution Environments |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM D 4332 : 2001 : R2006 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 3951 : 2018 : R2023 | Standard Practice for Commercial Packaging |
| ASTM D 4332 : 2014 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 4332 : 2001 : EDT 2 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 996 : 2010 | Standard Terminology of Packaging and Distribution Environments |
| ASTM D 4332 : 1999 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 4332 : 2013 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 4332 : 2001 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.