ASTM D 3882 : 2008 : R2016 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Bow and Skew in Woven and Knitted Fabrics
Hardcopy , PDF
10-08-2020
English
01-07-2016
This test method covers the determination of bow and skew of filling yarns in woven fabrics and the courses in knitted fabrics.
Committee |
D 13
|
DevelopmentNote |
Supersedes ASTM D 1910. (02/2002)
|
DocumentType |
Test Method
|
Pages |
5
|
ProductNote |
Reconfirmed EDT 1
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the determination of bow and skew of filling yarns in woven fabrics and the courses in knitted fabrics.
1.2This test method can also be used to measure the bow and skew of printed geometric designs.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 474 : 2015 | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
ASTM D 5446 : 2008 : R2019 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
ASTM D 6663 : 2008 : R2019 | Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use |
ASTM C 475/C475M : 2017 | Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
ASTM D 6554/D6554M : 2014 | Standard Specification for 100 % Cotton Denim Fabrics (Withdrawn 2023) |
ASTM D 5431 : 2008 : R2019 | Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use |
ASTM D 7811 : 2013 : R2017 | Standard Test Method for Bow and Skew Using a Measuring Tool |
ASTM D 7023 : 2006 : R2018 | Standard Terminology Relating to Home Furnishings |
ASTM D 2646 : 2018 | Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings |
ASTM D 3990 : 1999 : R2008 | Standard Terminology Relating to Fabric Defects |
ASTM D 3990 : 1999 : R2004 | Standard Terminology Relating to Fabric Defects |
ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 3990 : 2012 : R2016 | Standard Terminology Relating to Fabric Defects |
ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
ASTM D 2904 : 1997 | Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data |
ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 3990 : 2012 : EDT 1 | Standard Terminology Relating to Fabric Defects |
ASTM D 2906 : 1997 | Standard Practice for Statements on Precision and Bias for Textiles |
ASTM D 3990 : 1999 | Standard Terminology Relating to Fabric Defects |
ASTM D 3990 : 2012 | Standard Terminology Relating to Fabric Defects |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.