ASTM D 3666 : 2024
Current
Current
The latest, up-to-date edition.
Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-08-2024
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 04
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality management system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving materials.
1.2Criteria are provided for evaluating the capability of an agency to properly perform designated tests on road and paving materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This specification may be supplemented by more specific criteria, such as that in Specification E329, and requirements for particular projects.
1.3This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of road and paving materials.
1.4Accreditation is required to comply with this standard. Accreditation for this standard shall include at least one field. (See 8.1.3.)
1.5The users of the accredited agency must review the agency's scope of accreditation to ensure the agency has been accredited for its technical competence to perform the tasks requested by the user.
1.6The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 4867/D4867M : 2022 | Standard Test Method for Effect of Moisture on Asphalt Mixtures |
| ASTM D 6935 : 2022 | Standard Test Method for Determining Cement Mixing of Emulsified Asphalt |
| ASTM D 3744/D3744M : 2018 | Standard Test Method for Aggregate Durability Index |
| ASTM D 3042 : 2017 | Standard Test Method for Insoluble Residue in Carbonate Aggregates |
| ASTM D 2171/D2171M : 2022 | Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
| ASTM D 3203 : 2022 | Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures |
| ASTM D 3143/D3143M : 2019 | Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus |
| ASTM D 2489/D2489M : 2024 | Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures |
| ASTM D 3633/D3633M : 2023 | Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems |
| ASTM D 8541 : 2024 | Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors |
| ASTM D 7643 : 2022 | Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders |
| ASTM D 7870/D7870M : 2020 | Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure |
| ASTM D 6929 : 2021 | Standard Practice for Evaluating the Effect of Freezing on Emulsified Asphalts |
| ASTM D 402/D402M : 2024 | Standard Test Method for Distillation of Cutback Asphalt |
| ASTM D 8260 : 2020 | Standard Specification for Hot-Applied Asphalt Aggregate-Filled Mastic |
| ASTM D 6114/D6114M : 2019 : R2023 | Standard Specification for Asphalt-Rubber Binder |
| ASTM D 2172/D2172M : 2024 | Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures |
| ASTM D 7000 : 2019 : REV A | Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples |
| ASTM D 5404/D5404M : 2021 | Standard Practice for Recovery of Asphalt Binder from Solution Using the Rotary Evaporator |
| ASTM D 8259/D8259M : 2021 | Standard Test Method for Rotary Wheel Testing (RWT) of Compacted Asphalt Mixtures |
| ASTM D 8225 : 2019 | Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature |
| ASTM D 5/D5M : 2020 | Standard Test Method for Penetration of Bituminous Materials |
| ASTM D 6936 : 2023 | Standard Test Method for Determining Demulsibility of Emulsified Asphalt |
| ASTM D 1188/D1188M : 2022 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples |
| ASTM D 139 : 2024 | Standard Test Method for Float Test for Asphalt Materials |
| ASTM D 7113/D7113M : 2010 : R2016 | Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods |
| ASTM D 6925 : 2023 | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| ASTM D 2027/D2027M : 2019 : R2024 | Standard Specification for Cutback Asphalt (Medium-Curing Type) |
| ASTM D 6926 : 2020 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
| ASTM D 2041/D2041M : 2019 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures |
| ASTM D 8188 : 2023 | Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube) |
| ASTM D 8292 : 2020 | Standard Test Method for Permanent Deformation Behavior and Rutting Resistance of Compacted Asphalt Mix in the Modified Loaded Wheel Tracker Test Utilizing Controlled Confining Pressure |
| ASTM D 7064/D7064M : 2021 | Standard Practice for Open-Graded Friction Course (OGFC) Asphalt Mixture Design |
| ASTM D 70/D70M : 2021 | Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
| ASTM D 7196 : 2023 | Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples |
| ASTM D 8467 : 2022 | Standard Test Method for Determination of Emulsified Asphalt Residue By Quick Boil |
| ASTM D 4792/D4792M : 2013 : R2019 | Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions |
| ASTM D 3910 : 2021 | Standard Practices for Design, Testing, and Construction of Slurry Seal |
| ASTM D 75/D75M : 2019 | Standard Practice for Sampling Aggregates |
| ASTM D 113/D113M : 2017 : R2023 : EDT 1 | Standard Test Method for Ductility of Asphalt Materials |
| ASTM D 6390 : 2023 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
| ASTM D 545 : 2023 | Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) |
| ASTM D 6608 : 2020 | Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes |
| ASTM D 7227/D7227M : 2022 | Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus |
| ASTM D 7405 : 2020 | Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM D 8078 : 2024 | Standard Test Method for Ash Content of Asphalt Binder and Emulsified Asphalt Residues |
| ASTM D 6932/D6932M : 2021 | Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures |
| ASTM D 8303 : 2020 | Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain |
| ASTM D 4957 : 2018 | Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer |
| ASTM D 7175 : 2023 | Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM D 2726/D2726M : 2021 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures |
| ASTM D 7552 : 2022 | Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer |
| ASTM D 6933 : 2022 | Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) |
| ASTM D 6084/D6084M : 2021 | Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer |
| ASTM D 6752/D6752M : 2023 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 7173 : 2020 | Standard Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt |
| ASTM E 329 : 2023 | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
| ASTM D 8055 : 2023 | Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards |
| ASTM D 8044 : 2023 | Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures |
| ASTM D 7553 : 2015 : R2021 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
| ASTM D 3740 : 2023 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 2950/D2950M : 2022 | Standard Test Method for Density of Asphalt Mixtures in Place by Nuclear Methods |
| ASTM D 7495 : 2012 : R2019 | Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 6627/D6627M : 2022 | Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures |
| ASTM D 7906 : 2022 | Standard Practice for Recovery of Asphalt Binder from Solution Using Toluene and the Rotary Evaporator |
| ASTM D 6998 : 2019 | Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts |
| ASTM D 6704 : 2022 | Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
| ASTM D 6297 : 2020 | Standard Specification for Asphaltic Plug Joints for Bridges |
| ASTM D 6857/D6857M : 2023 | Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 243/D243M : 2022 | Standard Test Method for Residue of Specified Penetration |
| ASTM D 3549/D3549M : 2018 : R2023 | Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens |
| ASTM D 8079 : 2023 | Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor |
| ASTM D 8237 : 2021 | Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device |
| ASTM D 7313 : 2020 | Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry |
| ASTM D 6521 : 2022 | Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) |
| ASTM D 5361/D5361M : 2016 : R2022 | Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing |
| ASTM D 8189 : 2019 | Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR) |
| ASTM D 6930 : 2019 | Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts |
| ASTM D 4552/D4552M : 2020 | Standard Classification for Hot-Mix Recycling Agents |
| ASTM D 7981 : 2020 | Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor |
| ASTM D 7115 : 2020 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
| ASTM D 6931 : 2017 | Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures |
| ASTM D 1461 : 2017 : R2022 | Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures |
| ASTM D 7497 : 2021 | Standard Practice for Recovering Residue from Emulsified Asphalt Using Low-Temperature Evaporative Technique |
| ASTM D 6927 : 2022 | Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures |
| ASTM D 1754/D1754M : 2020 | Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
| ASTM D 6372 : 2023 | Standard Practice for Design, Testing, and Construction of Microsurfacing |
| ASTM D 2872 : 2022 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) |
| ASTM D 3319 : 2023 | Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel |
| ASTM D 1074 : 2017 | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| ASTM D 7063/D7063M : 2018 | Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples |
| ASTM D 8458 : 2022 | Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test |
| ASTM D 7370/D7370M : 2014 : R2021 | Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
| ASTM D 2419 : 2022 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM D 6703 : 2019 | Standard Test Method for Automated Heithaus Titrimetry |
| ASTM D7403 : 2019 | Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation<br> |
| ASTM D 8360 : 2022 | Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test |
| ASTM D 6934 : 2022 | Standard Test Method for Residue by Evaporation of Emulsified Asphalt |
| ASTM D 5801 : 2024 | Standard Test Method for Toughness and Tenacity of Asphalt Materials |
| ASTM D 5444 : 2024 | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
| ASTM D 2170/D2170M : 2024 | Standard Test Method for Kinematic Viscosity of Asphalts |
| ASTM D 7369 : 2020 | Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test |
| ASTM D 2042 : 2022 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene |
| ASTM D 7226 : 2013 : R2023 | Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.