ASTM D 3437 : 2015 : R2022
Current
The latest, up-to-date edition.
Standard Practice for Sampling and Handling Liquid Cyclic Products
Hardcopy , PDF
English
18-07-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 16
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers procedures for sampling and handling several liquid cyclic products. These specifically cover liquids at ambient temperature and include benzene, toluene, xylenes, cyclohexane, styrene, pyridine, ethylbenzene, isopropylbenzene, and alpha-methylstyrene in a manner which represents and preserves product quality.
1.2Any person sampling or handling these products should consult the applicable Safety Data Sheet (SDS) for specific first aid instructions and information on the proper equipment to have available for use in the event of personal contact or exposure.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 3, 4, 5, 6 and 7 and an appropriate SDS.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6875 : 2018 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
| ASTM D 843 : 2019 | Standard Specification for Nitration Grade Xylene |
| ASTM D 841 : 2019 | Standard Specification for Nitration Grade Toluene |
| ASTM D 5917 : 2015 : R2019 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 5871 : 2019 | Standard Specification for Benzene for Cyclohexane Feedstock |
| ASTM D 7951 : 2020 | Standard Specification for Disproportionation (TDP) Toluene |
| ASTM D 5136 : 2019 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
| ASTM D 3760 : 2018 | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (Withdrawn 2022) |
| ASTM D 8005 : 2018 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 5060 : 2012 : R2021 : EDT 1 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
| ASTM D 5386 : 2016 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 6621 : 2021 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
| ASTM D 2121 : 2016 | Standard Test Methods for Polymer Content of Styrene Monomer |
| ASTM D 3193 : 2019 | Standard Specification for Ethylbenzene |
| ASTM D 1492 : 2021 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
| ASTM D 7536 : 2020 | Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 2359 : 2019 | Standard Specification for Refined Benzene-535 |
| ASTM D 7266 : 2013 : R2018 : EDT 1 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) |
| ASTM D 6367 : 2021 | Standard Specification for AMS (α-Methylstyrene) |
| ASTM D 7359 : 2018 | Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
| ASTM D 3160 : 2020 : REV A | Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene) |
| ASTM D 7504 : 2021 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 7185 : 2019 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
| ASTM D 5713 : 2014 : R2018 : EDT 1 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
| ASTM D 7977 : 2019 | Standard Test Methods for Polymer Content of AMS (α-Methylstyrene) |
| ASTM D 2827 : 2019 | Standard Specification for Styrene Monomer |
| ASTM D 4735 : 2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
| ASTM D 7124 : 2019 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
| ASTM D 2340 : 2018 | Standard Test Method for Peroxides in Styrene Monomer |
| ASTM D 850 : 2021 | Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials |
| ASTM D 7057 : 2018 | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard) |
| ASTM D 6144 : 2022 | Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography |
| ASTM D 7704 : 2016 | Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration |
| ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
| ASTM D 5135 : 2021 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
| ASTM D 4590 : 2018 | Standard Test Method for Colorimetric Determination of <emph type="ital">p-tert</emph >-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry |
| ASTM D 7183 : 2018 : REV A : EDT 1 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 3505 : 2018 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023) |
| ASTM D 2119 : 2019 | Standard Test Method for Aldehydes in Styrene Monomer |
| ASTM D 4077 : 2017 | Standard Specification for Cumene (Isopropylbenzene) |
| ASTM D 5211 : 2019 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
| ASTM D 7871 : 2019 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number) |
| ASTM D 5309 : 2017 | Standard Specification for Cyclohexane 999 |
| ASTM D 7360 : 2016 | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration (Withdrawn 2023) |
| ASTM D 848 : 2018 | Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons |
| ASTM D 1631 : 2010 : R2018 : EDT 1 | Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method |
| ASTM D 4734 : 2020 | Standard Specification for Refined Benzene-545 |
| ASTM D 852 : 2020 | Standard Test Method for Solidification Point of Benzene |
| ASTM D 5194 : 2018 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 7125 : 2017 | Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process |
| ASTM D 5776 : 2021 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 7184 : 2020 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM D 847 : 2016 | Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons |
| ASTM D 5606 : 2019 | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
| ASTM D 5808 : 2020 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
| ASTM D 5471 : 2018 | Standard Specification for O-Xylene 980 |
| ASTM D 56 : 2021 : REV A | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM E 300 : 2003 : R2022 | Standard Practice for Sampling Industrial Chemicals |
| ASTM D 56 : 2016 : REV A | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM E 300 : 2003 : R2017 | Standard Practice for Sampling Industrial Chemicals |
| ASTM D 56 : 2022 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.