ASTM D 3217/D3217M : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
Hardcopy , PDF
09-11-2020
English
01-02-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 13
|
| DocumentType |
Test Method
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the measurement of the breaking tenacity of manufactured textile fibers taken from filament yarns, staple, or tow fiber, either crimped or uncrimped, and tested in either a double loop or as a strand formed into a single overhand knot.
1.2Methods for measuring the breaking tenacity of conditioned and wet (immersed) fibers in loop and knot form are included.
1.3Elongation in loop or knot tests has no known significance, and is usually not recorded.
1.4The basic distinction between the procedures described in these test methods and those included in Test Methods D2101 is the configuration of the specimen, that is, either as a double loop or in the configuration of a single overhand knot.
1.5The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4849 : 2013 : EDT 3 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 2258 : 1999 : R2012 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 3333 : 2007 : R2012 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
| ASTM D 2258 : 1999 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 4849 : 2020 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 2258 : 1999 : R2005 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 4849 : 2013 : EDT 2 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 4849 : 2002 : REV A | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1577 : 2001 | Standard Test Methods for Linear Density of Textile Fibers |
| ASTM D 4849 : 2013 : R2018 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 4849 : 2002 : REV B | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
| ASTM D 4849 : 2002 : REV B : R2007 : EDT 2 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 3822 : 1996 | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 4849 : 2002 : REV B : EDT 1 | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 3333 : 2007 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
| ASTM D 3822 : 2001 | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 4849 : 2002 : REV B : R2007 : EDT 1 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3822 : 2007 | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 3333 : 1995 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
| ASTM D 3333 : 2007 : R2018 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
| ASTM D 1577 : 2007 | Standard Test Methods for Linear Density of Textile Fibers |
| ASTM D 4849 : 2002 : REV B : R2007 | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 1577 : 2007 : R2012 | Standard Test Methods for Linear Density of Textile Fibers |
| ASTM D 4849 : 2013 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 4849 : 2002 : REV B : R2007 : EDT 3 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 3333 : 2001 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
| ASTM D 4849 : 2013 : EDT 1 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 1577 : 1996 | Standard Test Methods for Linear Density of Textile Fibers |
| ASTM D 1577 : 2007 : R2018 | Standard Test Methods for Linear Density of Textile Fibers |
| ASTM D 2101 : 1994 | Test Method for Tensile Properties of Single Man-Made Textile Fibers Taken from Yarns and Tows (Withdrawn 1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.