ASTM D 3089 : 1997 : R2008
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
Available format(s)
Hardcopy , PDF
Superseded date
21-12-2023
Superseded by
ASTM D 3089 : 1997 : R2017
ASTM D 7448 : 2016 : REDLINE
ASTM D 4446/D4446M : 2013 : REDLINE
ASTM D 4044/D4044M : 2015 : REDLINE
ASTM D 4220/D4220M : 2014 : REDLINE
ASTM D 4223/D4223M : 2012
Language(s)
English
Published date
01-10-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Referenced documents
3 Summary of test method
4 Significance and use
5 Apparatus
6 Reagents and materials
7 Preparation of apparatus
8 Procedure
9 Calculation
10 Precision and bias
11 Keywords
CONTAINED IN VOL. 15.09, 2017 Defines the rapid determination of the A-D dimension defined as the centerline dimension from the top plane of the valve mounting cup curl to the far end of the dip tube.
| Committee |
D 10
|
| DevelopmentNote |
Supersedes ASTM D 3813 and ASTM D 3813M. (03/2002) Supersedes ASTM D 3813 and ASTM D 3813M. (03/2002) Supersedes ASTM D 3815. (11/2011) Supersedes ASTM D 3815. (11/2011) Supersedes ASTM D 3816 and ASTM D 3816M. (08/2001) Supersedes ASTM D 3816 and ASTM D 3816M. (08/2001) Supersedes ASTM D 3816 and ASTM D 3816M. (08/2001) Supersedes ASTM D 3816 and ASTM D 3816M. (08/2001) Supersedes ASTM D 3833 and ASTM D 3833M (08/2001) Supersedes ASTM D 3833 and ASTM D 3833M (08/2001) Supersedes ASTM D 3833 and ASTM D 3833M (08/2001) Supersedes ASTM D 2733 (12/2001) Supersedes ASTM D 2733 (12/2001) Supersedes ASTM D 2355 (12/2001) Supersedes ASTM D 2355 (12/2001) Supersedes ASTM D 2355 (12/2001) Supersedes ASTM D 2355 (12/2001) Supersedes ASTM D 3880. (04/2010) Supersedes ASTM D 3880. (04/2010) Supersedes ASTM D 1910. (02/2002) Supersedes ASTM D 1910. (02/2002) Supersedes ASTM D 1910. (02/2002) Supersedes ASTM D 1910. (02/2002) Supersedes ASTM D 1910. (02/2002) Supersedes ASTM D 231 and ASTM D 1376. (02/2002) Supersedes ASTM D 231 and ASTM D 1376. (02/2002) Supersedes ASTM D 231 and ASTM D 1376. (02/2002) Supersedes ASTM D 3889 and ASTM D 3889M (08/2001) Supersedes ASTM D 3889 and ASTM D 3889M (08/2001) Supersedes ASTM D 3889 and ASTM D 3889M (08/2001) Supersedes ASTM D 3939. (08/2010) Supersedes ASTM D 3939. (08/2010) Supersedes ASTM D 419 and ASTM D 3109. (03/2002) Supersedes ASTM D 419 and ASTM D 3109. (03/2002) Supersedes ASTM D 419 and ASTM D 3109. (03/2002) Supersedes ASTM D 472. (02/2002) Supersedes ASTM D 472. (02/2002) Supersedes ASTM D 472. (02/2002) Supersedes ASTM D 2956. (03/2002) Supersedes ASTM D 2956. (03/2002) Supersedes ASTM D 2956. (03/2002) Supersedes ASTM D 2956. (03/2002) Also numbered as API MPM CH10.3. (08/2013) Also numbered as API MPM CH10.3. (08/2013) Also numbered as API MPM CH10.3. (08/2013) Also numbered as API MPM CH10.3. (08/2013) Supersedes ASTM D 4041. (03/2011) Supersedes ASTM D 4041. (03/2011) Supersedes ASTM D 3671. (03/2002) Supersedes ASTM D 3671. (03/2002) Supersedes ASTM D 3671. (03/2002) Supersedes ASTM D 3671. (03/2002) Supersedes ASTM D 3671. (03/2002) Supersedes ASTM D 4074. (06/2011) Supersedes ASTM D 4074. (06/2011) Supersedes MIL T 19247 (07/2004) Supersedes MIL T 19247 (07/2004) Supersedes ASTM D 41. (01/2011) Supersedes ASTM D 41. (01/2011) Supersedes ASTM D 2476. (02/2002) Supersedes ASTM D 2476. (02/2002) Supersedes ASTM D 4125. (01/2011) Supersedes ASTM D 4125. (01/2011) Supersedes O T 620 (07/2004) Supersedes O T 620 (07/2004) Supersedes O T 620 (07/2004) Supersedes ASTM D 1175 (12/2001) Supersedes ASTM D 1175 (12/2001) Supersedes ASTM D 1175. (02/2002) Supersedes ASTM D 1175. (02/2002) Supersedes ASTM D 1175. (02/2002) Supersedes ASTM D 3736. (03/2002) Supersedes ASTM D 3736. (03/2002) Supersedes ASTM D 3736. (03/2002) Supersedes ASTM D 659 (12/2001) Supersedes ASTM D 659 (12/2001) Supersedes ASTM D 2405, ASTM D 2432 and ASTM D 2708 (12/2001) Supersedes ASTM D 2405, ASTM D 2432 and ASTM D 2708 (12/2001) Supersedes ASTM D 752, ASTM D 753 and ASTM D 2819 (12/2001) Supersedes ASTM D 752, ASTM D 753 and ASTM D 2819 (12/2001) Supersedes ASTM D 4224 (12/2001) Supersedes ASTM D 4224 (12/2001) Supersedes ASTM D 4224 (12/2001) Supersedes ASTM D 4224 (12/2001) Supersedes ASTM D 4299 and ASTM D 1286. (02/2002) Supersedes ASTM D 4299 and ASTM D 1286. (02/2002) Supersedes ASTM D 4299 and ASTM D 1286. (02/2002) Also numbered as IP 356 (02/2002) Also numbered as API MPM CH10.7 (02/2003) Also numbered as IP 356 (02/2002) Also numbered as API MPM CH10.7 (02/2003) Also numbered as IP 356 (02/2002) Also numbered as API MPM CH10.7 (02/2003) Also numbered as IP 356 (02/2002) Also numbered as API MPM CH10.7 (02/2003) Supersedes ASTM D 1089 (12/2001) Supersedes ASTM D 1089 (12/2001) Supersedes ASTM D 4437. (10/2016) Supersedes ASTM D 4437. (10/2016) Also numbered as IP 71 SECTION 2. (12/2017) Also numbered as IP 71 SECTION 2. (12/2017) Supersedes ASTM D 4463. (07/2012) Supersedes ASTM D 4463. (07/2012)
|
| DocumentType |
Test Method
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2003 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2003 Reconfirmed 2001 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 1995 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2007 Reconfirmed 1999 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2000 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed EN Reconfirmed 2013 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 2000 Reconfirmed 2000 Reconfirmed 2011 Reconfirmed 2007 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2000 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2015 Reconfirmed 2011 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1999 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2017 Reconfirmed 2008 Reconfirmed 2000 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed 2017 Reconfirmed EDT 1 Reconfirmed 2016 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2008 Reconfirmed EDT 1 Reconfirmed 2016 Reconfirmed 2012 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 2001 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed EDT 1 Reconfirmed 2009 Reconfirmed 2015 Reconfirmed 2011 Reconfirmed 2007 Reconfirmed EV A Reconfirmed 2015 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2006 Reconfirmed 1999 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed 1996 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2017 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2007 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed EV A Reconfirmed 2012 Reconfirmed EDT 1 Reconfirmed 1998 Reconfirmed 2007 Reconfirmed 2003 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2017 Reconfirmed 2010 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 2016 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed EV A Reconfirmed 2016 Reconfirmed 2008 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 2011 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 1998 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 1996 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2002 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2014 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed EV A Reconfirmed 2015 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2017 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed 2003 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 1997 Reconfirmed 2013 Reconfirmed 2005 Reconfirmed EN Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2001 Reconfirmed 2001 Reconfirmed EV A Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2008 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1999 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2013 Reconfirmed EDT 1 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 2016 Reconfirmed 2009 Reconfirmed EV A Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2011 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed 2016 Reconfirmed 2012 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2003 Reconfirmed 1996 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2006 Reconfirmed 1999 Reconfirmed 2016 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2002 Reconfirmed 1998 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2009 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed 1997 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2002 Reconfirmed 2016 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed EDT 1 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 1997 Reconfirmed 2009 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2018 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2003 Reconfirmed 2015 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed EV A Reconfirmed EDT 1 Reconfirmed 1997 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2011 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2016 Reconfirmed 2012 Reconfirmed 2008 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2017 Reconfirmed EDT 1 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2013 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2015 Reconfirmed EDT 1 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2010 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2016 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed EV A Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 1998 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2006 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2011 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2017 Reconfirmed 2010 Reconfirmed 2016 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed EDT 2 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1997 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2014 Reconfirmed 2010 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 1995 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2010 Reconfirmed 2001 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed 2016 Reconfirmed 2009 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed EDT 2 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed EN Reconfirmed 2015 Reconfirmed EV A Reconfirmed 2010 Reconfirmed 2018 Reconfirmed 2009 Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2013 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 2014 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed EV A Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2002 Reconfirmed 1996 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2017 Reconfirmed 2009 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2009 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2014 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2016 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2016 Reconfirmed 2012 Reconfirmed 2008 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2015 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 2010 Reconfirmed 2003 Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2004 Reconfirmed 1997 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2003 Reconfirmed 1999 Reconfirmed 2014 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 2008 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2011 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 2002 Reconfirmed 1996 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 1998 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2014 Reconfirmed 2010 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2008 Reconfirmed 2015 Reconfirmed 2007 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2007 Reconfirmed EDT 2 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 1998 Reconfirmed 2007 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2006 Reconfirmed 1999 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2011 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2009 Reconfirmed EDT 1 Reconfirmed 2001 Reconfirmed 1995 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2010 Reconfirmed 2002 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2005 Reconfirmed 1998 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 1994 Reconfirmed 2003 Reconfirmed 1999 Reconfirmed 2016 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2017 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 1999 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed EDT 1 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 2015 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 1995 Reconfirmed 2001 Reconfirmed 1994 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2017 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2001 Reconfirmed 1995 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2002 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 1999 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2014 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 1997 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed EDT 1 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2009 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2013 Reconfirmed 2005 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2016 Reconfirmed 2010 Reconfirmed EDT 1 Reconfirmed EV A Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2010 Reconfirmed 2003 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 1994 Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed 1995 Reconfirmed 2011 Reconfirmed 2004 Reconfirmed 2001 Reconfirmed 1993 Reconfirmed EDT 1 Reconfirmed 1996 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2017 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed 2001 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 1999 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2017 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2016 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed 1997 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 2003 Reconfirmed 1997 Reconfirmed 2002 Reconfirmed 1995 Reconfirmed 2002 Reconfirmed 1995 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2002 Reconfirmed 1996 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed EDT 1 Reconfirmed 2010 Reconfirmed 2003 Reconfirmed 2008 Reconfirmed 2001 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 2016 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2013 Reconfirmed EDT 2 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2012 Reconfirmed EDT 1 Reconfirmed 2007 Reconfirmed 1999 Reconfirmed 2002 Reconfirmed 1995 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 1994 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 1995 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1999 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2014 Reconfirmed EDT 1 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2009 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 1998 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2017 Reconfirmed 2009 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2013 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 1997 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed 2018 Reconfirmed 2016 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 1997 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1999 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2012 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 1997 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2001 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2006 Reconfirmed 2002 Reconfirmed 2009 Reconfirmed 2002 Reconfirmed EV (2002) Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2005 Reconfirmed 2004 Reconfirmed 1997 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed EN Reconfirmed 2001 Reconfirmed 1994 Reconfirmed 2015 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2006 Reconfirmed 2001
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice covers the rapid determination of the A-D dimension defined as the centerline dimension from the top plane of the valve mounting cup curl to the far end of the dip tube. See Fig. 1.
1.2 This practice is limited to valves with 1-in. (25.4-mm) mounting cups.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
| ASTM D 887 : 2013 : REDLINE | Standard Practices for Sampling Water-Formed Deposits |
| ASTM D 1353 : 2013 : REDLINE | Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products |
| TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
| ASTM D 3787 : 2016 : REDLINE | Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
| ASTM D 115 : 2017 : REDLINE | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| ASTM D 422 : 1963 : R2002 : EDT 1 | Standard Test Method for Particle-Size Analysis of Soils |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM D 2652 : 2011 : REDLINE | Standard Terminology Relating to Activated Carbon |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 596 : 2001 : R2018 | Standard Guide for Reporting Results of Analysis of Water |
| ASTM D 242 : 2004 | Standard Specification for Mineral Filler For Bituminous Paving Mixtures |
| ASTM E 122 : 2017 : REDLINE | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM D 3515 : 2001 | Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009) |
| ASTM D 3418 : 2015 : REDLINE | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| AATCC TM23:2015e | COLORFASTNESS TO BURNT GAS FUMES |
| AATCC TM 93 : 2011(R2016) | ABRASION RESISTANCE OF FABRICS: ACCELEROTOR METHOD |
| ASTM D 2486 : 2017 : REDLINE | Standard Test Methods for Scrub Resistance of Wall Paints |
| ASTM D 1894 : 2014 : REDLINE | Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| ASTM D 932 : 2015 : REDLINE | Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits |
| ASTM D 2027 : 1997 | Standard Specification for Cutback Asphalt (Medium-Curing Type) |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM D 1793 : 2017 : REDLINE | Standard Test Method for Water Spotting of Emulsion Floor Polishes |
| ASTM D 1490 : 2001 : R2018 | Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
| ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
| ASTM D 4169 : 2016 : REDLINE | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 546 : 2017 : REDLINE | Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
| ASTM D 1160 : 2015-02 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AT REDUCED PRESSURE |
| ASTM D 5067 : 2016 : REDLINE | Standard Specification for Artists' Watercolor Paints |
| ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
| ASTM D 511 : 2014 : REDLINE | Standard Test Methods for Calcium and Magnesium In Water |
| ASTM E 474 : 1980 | Method for Evaluaton of Temperature Scale for Differential Thermal Analysis (Withdrawn 1986) |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 3867 : 2016 : REDLINE | Standard Test Methods for Nitrite-Nitrate in Water |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 2258 : 1999 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 2777 : 2013 : REDLINE | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM C 1163 : 2014 : REDLINE | Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride |
| CFR 40(PTS81-85) : JUL 2012 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| ASTM D 3110 : 1995 | Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996) |
| BS 1829(1962) : LATEST | REFERENCE TABLES FOR IRON V CONSTANTAN THERMOCOUPLES |
| ASTM D 1259 : 2006 : R2018 | Standard Test Methods for Nonvolatile Content of Resin Solutions |
| ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 484 : LATEST | SPECIFICATION FOR HYDROCARBON DRY CLEANING SOLVENTS |
| ASTM D 2048 : 2017 : REDLINE | Standard Test Method for Powdering of Floor Polish Films |
| ASTM D 512 : 2012 | Standard Test Methods for Chloride Ion In Water (Withdrawn 2021) |
| ASTM D 143 : 2014 : REDLINE | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 4412 : 2015 : REDLINE | Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits |
| ASTM D 4024 : 2015 : REDLINE | Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 2709 : 2016 : REDLINE | Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
| ASTM D 859 : 2016 : REDLINE | Standard Test Method for Silica in Water |
| ASTM A 376/A376M : 2017 : REDLINE | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
| ASTM D 459 : 2016 : REDLINE | Standard Terminology Relating to Soaps and Other Detergents |
| ASTM D 3870 : 1991 | Standard Practice for Establishing Performance Characteristics for Colony Counting Methods in Microbiology (Withdrawn 2000) |
| AATCC TM187-2013e | DIMENSIONAL CHANGES OF FABRICS: ACCELERATED |
| ASTM D 4043 : 2017 : REDLINE | Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques |
| ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
| AATCC TM 15 : 2013e | COLORFASTNESS TO PERSPIRATION |
| ASTM D 402/D402M : 2014 : REDLINE | Standard Test Method for Distillation of Cutback Asphalt (Withdrawn 2023) |
| ISO 3454:2008 | Hydrometry — Direct depth sounding and suspension equipment |
| ASTM D 2825 : 2017 : REDLINE | Standard Terminology Relating to Polishes and Related Materials |
| ASTM D 3686 : 2013 : REDLINE | Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method) |
| ASTM D 1613 : 2017 : REDLINE | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
| ASTM D 4646 : 2016 : REDLINE | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM D 3792 : 2016 : REDLINE | Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph |
| ASTM D 6792 : 2017 : REDLINE | Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories |
| ASTM D 9 : 2012 : REDLINE | Standard Terminology Relating to Wood and Wood-Based Products |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM D 4700 : 2015 : REDLINE | Standard Guide for Soil Sampling from the Vadose Zone |
| AATCC TM172:2010e(2016)e2:2019 | COLORFASTNESS TO POWDERED NON-CHLORINE BLEACH IN HOME LAUNDERING |
| ISO 8130-11:1997 | Coating powders Part 11: Inclined-plane flow test |
| ASTM D 858 : 2017 : REDLINE | Standard Test Methods for Manganese in Water |
| ASTM D 6511/D6511M : 2011-07 | TEST METHODS FOR SOLVENT BEARING BITUMINOUS COMPOUNDS |
| ASTM D 4447 : 2015 : REDLINE | Standard Guide for Disposal of Laboratory Chemicals and Samples |
| TT-E-508 Revision C:1977 | ENAMEL, INTERIOR SEMIGLOSS, TINTS AND WHITES |
| ASTM D 6093 : 1997 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D 4262 : 2005 : R2018 | Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces |
| ASTM D 1152 : 2006 | Standard Specification for Methanol (Methyl Alcohol) |
| ASTM D 3052 : 2017 : REDLINE | Standard Practice for Rating Water-Emulsion Floor Polishes |
| API MPM CH10.5 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.5: STANDARD TEST METHOD FOR WATER IN PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS BY DISTILLATION |
| ASTM D 609 : 2017 : REDLINE | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASME N45.2.6 : 1978 | QUALIFICATIONS OF INSPECTION, EXAMINATION, AND TESTING PERSONNEL FOR NUCLEAR POWER PLANTS |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| ASTM D 4104 : 1996 | Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests) |
| ASTM D 7442 : 2016 : REDLINE | Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy |
| AATCC EP 2 : 2012 | GRAY SCALE FOR STAINING |
| ASTM D 1847 : 1993 : R1998 | Standard Test Methods for Total Chlorine Content of Epoxy Resins (Withdrawn 2007) |
| ASTM D 5208 : 2014 : REDLINE | Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
| AATCC EP 1 : 2012 | GRAY SCALE FOR COLOR CHANGE |
| ASTM D 2172 : 2005 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM D 2525 : 2013 : REDLINE | Standard Practice for Sampling Wool for Moisture (Withdrawn 2022) |
| ASTM D 660 : 1993 | Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| IEC 60641-3-2:2007 | Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| ASTM D 4541 : 2017 : REDLINE | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 3740 : 2012-06 | PRACTICE FOR MINIMUM REQUIREMENTS FOR AGENCIES ENGAGED IN TESTING AND/OR INSPECTION OF SOIL AND ROCK AS USED IN ENGINEERING DESIGN AND CONSTRUCTION |
| ASTM D 585 : 1997 | Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
| ISO 8130-2:1992 | Coating powders Part 2: Determination of density by gas comparison pyknometer (referee method) |
| ASTM D 3648 : 2014 : REDLINE | Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
| ASTM D 1711 : 2015 : REDLINE | Standard Terminology Relating to Electrical Insulation |
| ASTM D 2996 : 2017 : REDLINE | Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 3474 : 1990 | PRACTICE FOR CALIBRATION AND USE OF TORQUE METERS USED IN PACKAGING APPLICATIONS |
| ASTM D 7209 : 2006 | Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015) |
| ASTM D 7255 : 2014 : REDLINE | Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) |
| ASTM D 3183 : 201 | PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS |
| ASTM D 6883 : 2017 : REDLINE | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles |
| ASTM D 2862 : 2016 : REDLINE | Standard Test Method for Particle Size Distribution of Granular Activated Carbon |
| ASTM D 1455 : 2017 : REDLINE | Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish |
| ASTM D 2084 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER |
| ASTM D 902 : 2012 : REDLINE | Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
| ASTM E 1187 : 1997 | Standard Terminology Relating to Conformity Assessment (Withdrawn 2006) |
| ASTM E 105 : 2016 : REDLINE | Standard Practice for Probability Sampling of Materials |
| ASTM D 4326 : 2013 : REDLINE | Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence |
| ASTM D 2494 : 2013 : REDLINE | Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow |
| ASTM D 2795 : 1995 | Standard Test Methods for Analysis of Coal and Coke Ash (Withdrawn 2001) |
| ASTM D 4329 : 2013 : REDLINE | Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics |
| ASTM D 871 : 1996 | Standard Test Methods of Testing Cellulose Acetate |
| ASTM D 5421 : 2015 : REDLINE | Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM E 275 : 2008 | Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
| ASTM D 4321 : 2015 : REDLINE | Standard Test Method for Package Yield of Plastic Film (Withdrawn 2024) |
| ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
| ASTM D 2344/D2344M : 2016 : REDLINE | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
| ASTM D 1349 : 2014 : REDLINE | Standard Practice for Rubber—Standard Conditions for Testing |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM E 2165 : 2001 | Standard Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials (Withdrawn 2007) |
| ASTM D 3352 : 2015 : REDLINE | Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines |
| ASTM E 83 : 2016 : REDLINE | Standard Practice for Verification and Classification of Extensometer Systems |
| ASTM D 1959 : 1997 | Standard Test Method for Iodine Value of Drying Oils and Fatty Acids (Withdrawn 2006) |
| ASTM D 5098 : 2016 : REDLINE | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 4285 : 1983 : R2018 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
| ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM D 1076 : 2015 : REDLINE | Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| ASTM D 2103 : 2015 : REDLINE | Standard Specification for Polyethylene Film and Sheeting |
| ASTM D 3286 : 1996 | Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter (Withdrawn 2000) |
| ASTM D 16 : 2016 : REDLINE | TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS |
| ISO 1396:1975 | Vulcanized and unvulcanized compounded rubber Determination of copper content Zinc diethyldithiocarbamate photometric method |
| ASTM D 1074 : 2017 : REDLINE | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| CFR 49(PTS186-199) : 0 | TRANSPORTATION |
| ISO/IEC Guide 25:1990 | General requirements for the competence of calibration and testing laboratories |
| ISO 4572:1981 | Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance |
| ASTM C 184 : 1994 : EDT 1 | Standard Test Method for Fineness of Hydraulic Cement by the 150-µm (No. 100) and 75-µm (No. 200) Sieves (Withdrawn 2002) |
| ISO 1655:1975 | Raw rubber and rubber latex Determination of manganese content Potassium periodate photometric method |
| ASTM D 1305 : 2016 : REDLINE | Standard Specification for Electrical Insulating Paper and Paperboard—Sulfate (Kraft) Layer Type |
| TT-E-506 Revision K:1977 | ENAMEL, ALKYD, GLOSS, TINTS AND WHITE (FOR INTERIOR USE) |
| ASTM E 507 : 2013 : REDLINE | Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry |
| ASTM D 5289 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS |
| ASTM D 87 : 2009 | Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve) |
| ASTM D 76 : 1999 | Standard Specification for Tensile Testing Machines for Textiles |
| ASTM D 1068 : 2015 : REDLINE | Standard Test Methods for Iron in Water |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| MIL-STD-414 Base Document:1957 | SAMPLING PROCEDURE AND TABLE FOR INSPECTION BY VARIABLES FOR PERCENT DEFECTIVE |
| ASTM D 6551/D6551M : 2005 | Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus |
| ASTM D 516 : 2016 : REDLINE | Standard Test Method for Sulfate Ion in Water |
| CFR 16(PTS0-999) : 0 | COMMERCIAL PRACTICES |
| ASTM E 472 : 1986 | PRACTICE FOR REPORTING THERMO-ANALYTICAL DATA |
| ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| ASTM D 4045 : 2015 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D 3206 : 2017 : REDLINE | Standard Test Method for Soil Resistance of Floor Polishes |
| ASTM D 6901 : 2015 | Standard Specification for Artists' Colored Pencils |
| ASTM D 832 : 2007 : R2018 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
| API MPM CH10.4 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE) |
| ASTM E 200 : 2016 : REDLINE | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM D 1830 : 1999 | Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method |
| ASTM D 4442 : 2016 : REDLINE | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 4526 : 2012 : REDLINE | Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography |
| NACE TM 01 74 : 2002 | LABORATORY METHODS FOR THE EVALUATION OF PROTECTIVE COATINGS AND LINING MATERIALS ON METALLIC SUBSTRATES IN IMMERSION SERVICE |
| ASTM D 420 : 1998 | Guide to Site Characterization for Engineering, Design, and Construction Purposes |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ASTM D 3360 : 1996 | Standard Test Method for Particle Size Distribution by Hydrometer of the Common White Extender Pigments (Withdrawn 2003) |
| ASTM D 513 : 2016 : REDLINE | Standard Test Methods for Total and Dissolved Carbon Dioxide in Water |
| ASTM D 360 : 2012 | Standard Specification for Shellac Varnishes |
| BS 3900-A11:1974 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Small scale test for combustibility |
| ASTM E 180 : 2003 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
| ASTM D 2457 : 2013 : REDLINE | Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 661 : 1993 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ASTM D 1776/D1776M : 2016 : REDLINE | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 888 : 2012-05 | TEST METHODS FOR DISSOLVED OXYGEN IN WATER |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| ASTM D 2041 : 2003 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
| ASTM D 5373 : 2016 : REDLINE | Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke |
| ASTM D 662 : 1993 | Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
| ASTM D 3508 : 1978 : R1982 | METHOD FOR EVALUATING WATER TESTING MEMBRANE FILTERS FOR FAECAL COLIFORM RECOVERY |
| ASTM D 1253 : 2014 : REDLINE | Standard Test Method for Residual Chlorine in Water |
| ASTM D 3898 : 1993 | TEST METHOD FOR CHROMIC OXIDE IN BASIC CHROMIUM TANNING LIQUORS |
| ASTM D 3651 : 2016 : REDLINE | Standard Test Method for Barium in Brackish Water, Seawater, and Brines |
| ASTM C 581 : 2015 : REDLINE | Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ISO 6472:2017 | Rubber compounding ingredients — Abbreviated terms |
| ASTM D 2867 : 2017 : REDLINE | Standard Test Methods for Moisture in Activated Carbon |
| ISO 5272:1979 | Toluene for industrial use — Specifications |
| ASTM G 152 : 2013 : REDLINE | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| AATCC TM 135 : 2015 | DIMENSIONAL CHANGES OF FABRICS AFTER HOME LAUNDERING |
| ASTM D 3976 : 1992 | PRACTICE FOR PREPARATION OF SEDIMENT SAMPLES FOR CHEMICAL ANALYSIS |
| ISO 14532:2014 | Natural gas — Vocabulary |
| ISO 472:2013 | Plastics — Vocabulary |
| ASTM D 2632 : 2015 : REDLINE | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| ASTM D 3921 : 1996 | Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water |
| ASTM D 4387 : 2002 | Standard Guide for Selecting Grab Sampling Devices for Collecitng Benthic Macroinvertebrates (Withdrawn 2003) |
| AATCC TM 116 : 2013 | COLORFASTNESS TO CROCKING: ROTARY VERTICAL CROCKMETER METHOD |
| ASTM D 2162 : 2017 : REDLINE | Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards |
| ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 562 : 2010 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| ASTM D 2419 : 2014 : REDLINE | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM D 7282 : 2014 : REDLINE | Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements |
| ASTM D 217 : 2017 : REDLINE | TEST METHODS FOR CONE PENETRATION OF LUBRICATING GREASE |
| ASTM D 3973 : 1985 | TEST METHOD FOR LOW-MOLECULAR WEIGHT HALOGENATED HYDROCARBONS IN WATER |
| ASTM D 1461 : 2017 : REDLINE | Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures |
| API MPM CH10.2 : 2016 | Determination of Water in Crude Oil by Distillation |
| ASTM D 3394 : 2016 : REDLINE | Standard Test Methods for Sampling and Testing Electrical Insulating Board |
| ASTM E 394 : 2015 : REDLINE | Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
| ASTM D 5277 : 1992 | TEST METHOD FOR PERFORMING PROGRAMMED HORIZONTAL IMPACTS USING AN INCLINED IMPACT TESTER |
| ASTM D 1003 : 2013 : REDLINE | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 3203 : 2005 | Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM D 2028 : 1997 | Standard Specification for Cutback Asphalt (Rapid-Curing Type) |
| ASTM D 2060 : 2014 | Standard Test Methods for Measuring Zipper Dimensions |
| ASTM D 865 : 2011 | Standard Test Method for Rubber<char: emdash>Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D 1457 : 1992 | Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
| ASTM D 3153 : 2017 : REDLINE | Standard Test Method for Recoatability of Water-Emulsion Floor Polishes |
| ASTM D 7177/D7177M : 2005 : R2015 : EDT 1 | Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes |
| TAPPI T 487 : 0 | FUNGUS RESISTANCE OF PAPER AND PAPERBOARD |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D 2633 : 2013-03 | TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM E 100 : 2017 : REDLINE | SPECIFICATION FOR ASTM HYDROMETERS |
| API MPM CH8.1 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.1: STANDARD PRACTICE FOR MANUAL SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
| ASTM D 1499 : 2013 : REDLINE | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
| ASTM D 2386 : 2015 | Standard Test Method for Freezing Point of Aviation Fuels |
| ASTM D 880 : 1992 : R2002 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
| API MPM CH10.9 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.9: STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY COULOMETRIC KARL FISCHER TITRATION |
| ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
| ASTM D 1192 : 1998 | Standard Guide for Equipment for Sampling Water and Steam in Closed Conduits (Withdrawn 2003) |
| ASTM D 7091 : 2013 : REDLINE | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 6229 : 2006 | Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM D 1639 : 1990 : R1996 : EDT 1 | Standard Test Method for Acid Value of Organic Coating Materials (Withdrawn 2005) |
| ASTM D 3682 : 2013 : REDLINE | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
| ASTM D 2050 : 2011 | Standard Terminology Relating to Fasteners and Closures Used with Textiles |
| ASTM D 1792 : 2017 : REDLINE | Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes |
| ASTM D 3980 : 1988 | Practice for Interlaboratoy Testing of Paint and Related Materials (Withdrawn 1998) |
| ACI 308 : 92(R1997) | PRACTICE FOR CURING CONCRETE |
| ASTM E 229 : 1997 | Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003) |
| ASTM E 430 : 2011 : REDLINE | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 857 : 2017 : REDLINE | Standard Test Method for Aluminum in Water |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM D 1059 : 2017 | Standard Test Method for Yarn Number Based on Short-Length Specimens |
| ISO 2537:2007 | Hydrometry — Rotating-element current-meters |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| IEC 60641-3-1:2008 | Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1 |
| ASTM D 2294 : 1996 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| AATCC TM8-2016e(2022)e | COLORFASTNESS TO CROCKING: CROCKMETER METHOD |
| ASTM D 1125 : 2014 : REDLINE | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
| ASTM D 905 : 2008 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ASTM D 6089 : 2015 : REDLINE | Standard Guide for Documenting a Groundwater Sampling Event |
| ASTM D 5386 : 2016 : REDLINE | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM E 104 : 2002 | Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions |
| ASTM D 3743 : 1984 : R2000 | Standard Terminology Relating To Bridge Deck and Substructure Protection (Withdrawn 2004) |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| AATCC TM61:2013e2:2019 | COLORFASTNESS TO LAUNDERING: ACCELERATED |
| AATCC TM 188 : 2013E(R2017) | COLORFASTNESS TO SODIUM HYPOCHLORITE BLEACH IN HOME LAUNDERING |
| ASTM D 923 : 2015 : REDLINE | Standard Practices for Sampling Electrical Insulating Liquids |
| ASTM D 2130 : 2013 : REDLINE | Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection (Withdrawn 2022) |
| ASTM E 1323 : 2015 : REDLINE | Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
| ASTM D 1172 : 2015 : REDLINE | Standard Guide for pH of Aqueous Solutions of Soaps and Detergents |
| ASTM D 1391 : 1978 | Standard Method for Measurement of Odor in Atmospheres (Dilution Method) (Withdrawn 1986) |
| ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM D 4415 : 2005 | Standard Test Methods for Determination of Dimer in Acrylic Acid (Withdrawn 2011) |
| PPP-C-2020 Revision A:1994 | CHEMICALS, LIQUID, DRY AND PASTE, PACKAGING OF |
| ASTM D 3037 : 1993 | Standard Test Methods for Carbon Black—Surface Area by Nitrogen Adsorption (Withdrawn 1999) |
| ASTM D 1682 : 1964 | TEST METHODS FOR BREAKING LOAD AND ELONGATION OF TEXTILE FABRICS |
| ASTM C 117 : 2017 : REDLINE | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
| ASTM D 914 : 2012 : REDLINE | Standard Test Methods for Ethylcellulose |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| O-O-670 Revision C:1991 | ORTHOPHOSPHORIC (PHOSPHORIC) ACID, TECHNICAL |
| ASTM D 1251 : 1994 | Standard Test Method for Water Vapor Permeability of Packages by Cycle Method (Withdrawn 1999) |
| ASTM D 5724 : 2016 : REDLINE | Standard Specification for Gouache Paints |
| ASTM D 4860 : 2014 : REDLINE | TEST METHOD FOR FREE WATER AND PARTICULATE CONTAMINATION IN MIDDLE DISTILLATE FUELS (CLEAR AND BRIGHT NUMERICAL RATING) |
| AATCC TM 124 : 2014 | SMOOTHNESS APPEARANCE OF FABRICS AFTER REPEATED HOME LAUNDERING |
| ASTM D 204 : 2002 | Standard Test Methods for Sewing Threads |
| ASTM D 1073 : 2016 : REDLINE | Standard Specification for Fine Aggregate for Asphalt Paving Mixtures |
| ASME NQA 1 : 2015 | Quality Assurance Requirements for Nuclear Facility Applications (NQA-1 - 2015) |
| ASTM D 1329 : 2016 : REDLINE | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ASTM D 3450 : 2015 : REDLINE | Standard Test Method for Washability Properties of Interior Architectural Coatings |
| ASTM D 4703 : 2016 : REDLINE | Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets |
| ASTM D 5487 : 2016 : REDLINE | Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
| AATCC TM 16 : 2004 | COLORFASTNESS TO LIGHT |
| ASTM D 3632 : 1998 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM E 473 : 2016-05 | TERMINOLOGY RELATING TO THERMAL ANALYSIS AND RHEOLOGY |
| ASTM E 173 : 1993 | Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997) |
| ASTM E 203 : 2016 : REDLINE | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM G 23 : 1996 | Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000) |
| ASTM D 4758 : 1992 : R1998 | Standard Test Method for Nonvolatile Content of Latexes (Withdrawn 2007) |
| ASTM D 3330/D3330M : 2004 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
| ASTM D 3843 : 2016 : REDLINE | Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities |
| ASTM D 434 : 1995 | Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam (Withdrawn 2004) |
| ASTM D 1888 : 1978 | Methods of Test for Particulate and Dissolved Matter in Water (Withdrawn 1989) |
| ASTM D 6988 : 2013 : REDLINE | Standard Guide for Determination of Thickness of Plastic Film Test Specimens |
| ISO 3105:1994 | Glass capillary kinematic viscometers — Specifications and operating instructions |
| ASTM D 4302 : 2014 : REDLINE | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| AATCC EP 8 : 2010 | 9-STEP CHROMATIC TRANSFERENCE SCALE |
| ASTM D 4365 : 2013 : REDLINE | TEST METHOD FOR DETERMINING MICROPORE VOLUME AND ZEOLITE AREA OF A CATALYST |
| ASTM D 1566 : 2015 : REDLINE | TERMINOLOGY RELATING TO RUBBER |
| ASTM D 1650 : 1991 | Test Methods of Sampling and Testing Shellac Varnish (Withdrawn 1997) |
| ASTM D 1212 : 1991 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 4483 : 2014-02 | PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
| ASTM D 685 : 2017 : REDLINE | Standard Practice for Conditioning Paper and Paper Products for Testing |
| ASTM D 5820 : 1995 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 3207 : 2017 : REDLINE | Standard Test Method for Detergent Resistance of Floor Polish Films |
| ASTM D 2231 : 1994 | Standard Practice for Rubber Properties in Forced Vibration (Withdrawn 1998) |
| ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
| ASTM D 5641/D5641M : 2016 : REDLINE | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM E 1870 : 2011 : REDLINE | TEST METHOD FOR ODOR AND TASTE TRANSFER FROM POLYMERIC PACKAGING FILM |
| AATCC TM 132 : 2013 | COLORFASTNESS TO DRYCLEANING |
| ASTM D 2997 : 2015 : REDLINE | Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 895 : 1994 | Standard Test Method for Water Vapor Permeability of Packages (Withdrawn 1999) |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 1989 : 1997 | Standard Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters (Withdrawn 2000) |
| ASTM D 2234/D2234M : 2017 : REDLINE | Standard Practice for Collection of a Gross Sample of Coal |
| ISO 6721-1:2011 | Plastics Determination of dynamic mechanical properties Part 1: General principles |
| ISO 3455:2007 | Hydrometry Calibration of current-meters in straight open tanks |
| ASTM D 1575 : 2013 : REDLINE | Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver |
| ASTM D 629 : 2015 : REDLINE | Standard Test Methods for Quantitative Analysis of Textiles |
| ASTM D 659 : 1986 : EDT 1 | Method of Evaluating Degree of Chalking of Exterior Paints |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM E 301 : 1994 | Standard Test Method for Total Acidity of Organic Acids (Withdrawn 2001) |
| ASTM D 3802 : 2016 : REDLINE | Standard Test Method for Ball-Pan Hardness of Activated Carbon |
| ASTM D 2489 : 2002 | Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| ASTM D 3387 : 2011 : REDLINE | Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) |
| ASTM D 2579 : 1993 : EDT 1 | Standard Test Method for Total Organic Carbon in Water (Withdrawn 2002) |
| ASTM D 6026 : 2013 : REDLINE | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 1234 : 2013 : REDLINE | Standard Test Method of Sampling and Testing Staple Length of Grease Wool |
| ASTM D 3986 : 2017 : REDLINE | Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy |
| ASTM D 362 : 1984 | Specification for Industrial Grade Toluene (Withdrawn 1989) |
| ASTM D 4749 : 1987 | Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
| ASTM D 943 : 2017-08 | TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS |
| ASTM D 1179 : 2016 : REDLINE | Standard Test Methods for Fluoride Ion in Water |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 1744 : 2013 | Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) |
| ASTM D 4538 : 2015 : REDLINE | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 470 : 2013 : REDLINE | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM D 374 : 1999 | Standard Test Methods for Thickness of Solid Electrical Insulation |
| ASTM D 3742 : 1998 | Standard Test Method for 1,1,1-Trichloroethane Content (Withdrawn 2003) |
| ASTM D 1131 : 1997 | Standard Test Methods of Testing Rosin Oils (Withdrawn 2003) |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
| ACI 531.1 : 1983 | CONCRETE MASONRY CONSTRUCTION, SPECIFICATION FOR, |
| ASTM D 1560 : 2015 : REDLINE | Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus |
| ASTM D 4410 : 2016 : REDLINE | Terminology for Fluvial Sediment |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D 3892 : 2015 : REDLINE | PRACTICE FOR PACKAGING/PACKING OF PLASTICS |
| ASTM D 1441 : 2012 : REDLINE | Standard Practice for Sampling Cotton Fibers for Testing |
| ISO 8130-3:1992 | Coating powders Part 3: Determination of density by liquid displacement pyknometer |
| ASTM D 945 : 2016 : REDLINE | Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph) |
| ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ASTM D 4263 : 1983 : R2018 | Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method |
| ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
| ASTM G 24 : 2013 : REDLINE | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
| ASTM E 168 : 2016 | Standard Practices for General Techniques of Infrared Quantitative Analysis |
| API MPM CH8.2 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.