ASTM D 2847 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Testing Engine Coolants in Car and Light Truck Service
Available format(s)
Hardcopy , PDF
Superseded date
28-06-2022
Superseded by
Language(s)
English
Published date
19-06-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 15
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers an updated procedure for evaluating corrosion protection and performance of an engine coolant in passenger car, light and heavy duty truck service that closely imitates current vehicle and engine manufacturers practices.
Note 1:Coolant evaluation in vehicle service may require considerable time and expense; therefore, the product should be pretested in the laboratory for general acceptability. Typical tests vary from small, closely controlled tests, to large tests where close control is not always practical. The most often referenced protocols for laboratory testing are defined in Specifications D3306, D6210, D7517, D7518, D7714, and D7715.
1.2The units quoted in this practice are to be regarded as standard. The values given in parentheses are approximate equivalents for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7.
| ASTM D 2570 : 2016 | Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants |
| ASTM D 7715 : 2012 : R2021 | Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 7518 : 2010 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 3321 : 2019 | Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants |
| ASTM D 3306 : 2014 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 1287 : 2011 : R2020 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 7517 : 2009 | Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 6210 : 2017 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines<rangeref></rangeref > |
| ASTM D 1287 : 1991 : R1997 : EDT 1 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1287 : 2009 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 6210 : 2004 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 6210 : 2008 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 7518 : 2009 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 4725 : 2011 | Standard Terminology for Engine Coolants |
| ASTM D 1287 : 2011 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1121 : 2007 | Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
| ASTM D 3306 : 2003 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 3306 : 2009 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 4725 : 1998 | Standard Terminology for Engine Coolants |
| ASTM D 1121 : 2011 : R2020 | Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
| ASTM D 1121 : 1967 | Standard Method Of Test For Reserve Alkalinity Of Engine Antifreezes And Antirusts |
| ASTM D 2809 : 1994 : R1999 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 3321 : 2013 | Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants |
| ASTM D 3306 : 2021 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 5827 : 2009 : EDT 1 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 7518 : 2020 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6130 : 1997 : REV A : R2009 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 7714 : 2011 | Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 7714 : 2011 : R2021 | Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6210 : 2010 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 3321 : 1994 : R1998 | Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants |
| ASTM D 3306 : 2010 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 2809 : 2021 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 3306 : 2008 : REV A | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6130 : 2011 : R2018 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 4725 : 2006 | Standard Terminology for Engine Coolants |
| ASTM D 2809 : 2009 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 6210 : 2003 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 6210 : 2006 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 4725 : 2015 | Standard Terminology for Engine Coolants and Related Fluids |
| ASTM D 3306 : 2001 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6130 : 1997 : REV A : R2003 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 1121 : 2011 | Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
| ASTM D 1287 : 1991 : R2002 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1121 : 1998 | Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
| ASTM D 6210 : 1998 : REV A | Standard Specification for Fully-Formulated Ethylene-Glycol-Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 7714 : 2011 : R2016 : EDT 1 | Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 5827 : 1995 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 7517 : 2019 | Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 7715 : 2011 | Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 4725 : 2004 | Standard Terminology for Engine Coolants |
| ASTM D 2809 : 2009 : R2017 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 3306 : 2020 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 3306 : 2005 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 2809 : 2004 : EDT 2 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 2809 : 2004 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 6130 : 2011 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 4725 : 2008 | Standard Terminology for Engine Coolants |
| ASTM D 3321 : 1994 : R2002 | Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants |
| ASTM D 7715 : 2012 | Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 3321 : 2012 | Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants |
| ASTM D 5827 : 2009 : R2015 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 2809 : 2004 : EDT 1 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 3306 : 2019 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 7517 : 2009 : R2014 | Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 4725 : 2008 : REV A | Standard Terminology for Engine Coolants |
| ASTM D 7518 : 2010 : R2015 : EDT 1 | Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 3306 : 2000 : REV A | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 5827 : 2009 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 7715 : 2012 : R2016 : EDT 1 | Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 3306 : 2008 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 6210 : 2003 : EDT 1 | Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 3306 : 2011 | Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 4725 : 2013 | Standard Terminology for Engine Coolants and Related Fluids |
| ASTM D 3321 : 1994 : R2007 | Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants |
| ASTM D 6130 : 1997 : REV A | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.