ASTM D 283 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
Hardcopy , PDF
11-06-2019
English
01-11-2013
CONTAINED IN VOL. 06.03, 2017 Defines test procedures for the chemical analysis of cuprous oxide and copper pigments.
Committee |
D 01
|
DocumentType |
Test Method
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1These test methods cover procedures for the chemical analysis of cuprous oxide and copper pigments.
1.2The analytical procedures appear in the following order:
Sections | |
Total Copper | 7 |
Total Reducing Power as Cuprous Oxide | 8 and 9 |
Metallic Copper | 10 and 11 |
Cuprous Oxide | 12 |
Cupric Oxide | 13 |
Metals Other than Copper | 14 – 16 |
Chlorides and Sulfates | 17 and 18 |
Acetone-Soluble Matter | 19 |
Water | 20 |
Stability | 21 |
Coarse Particles | 22 |
Coarse Particles Insoluble in Nitric Acid | 23 |
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
CGSB 1.123 : 92 AMD 1 98 | VINYL ANTIFOULING PAINT FOR SHIPS' BOTTOMS |
ASTM D 6632 : 2001 | Standard Test Method for Total Copper in Antifouling Paints (Withdrawn 2010) |
ASTM D 964 : 2003 : R2008 : EDT 1 | Standard Specification for Metallic Copper Powder for Use in Antifouling Paints |
07/30147011 DC : 0 | BS EN ISO 13678 - PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS |
ISO 13678:2010 | Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
API 5A3 REDLINE : 2009 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
UNI EN ISO 13678 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS |
ASTM D 964 : 2003 | Standard Specification for Metallic Copper Powder for Use in Antifouling Paints |
BS EN ISO 13678:2012 | Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
API 5A3 RUSSIAN : 2015 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
API 5A2 : 6ED 88 | BULLETIN ON THREAD COMPOUNDS FOR CASING, TUBING AND LINE PIPE |
I.S. EN ISO 13678:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS (ISO 13678:2010) |
EN ISO 13678:2012 | Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements (ISO 13678:2010) |
BS ISO 13678:2000 | Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
API 5A3 : 2011 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
ASTM D 964 : 2003 : R2014 | Standard Specification for Metallic Copper Powder for Use in Antifouling Paints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.