ASTM D 2709 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
23-08-2022
English
06-05-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 05.01, 2016 Defines the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm[2]/s to 4.1 mm[2]/s at 40 degrees C (1.0 cSt to 4.1 cSt at 104 degrees F) and densities in the range of 770 kg/m[3] to 900 kg/m[3] at 15 degrees C.
| Committee |
D 02
|
| DocumentType |
Redline
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm2/s to 4.1 mm2/s at 40 °C (1.0 cSt to 4.1 cSt at 104 °F) and densities in the range of 770 kg/m3 to 900 kg/m3 at 15 °C.
Note 1:Fuels corresponding to Specification D396 Grades No. 1 and 2, D975 Grades No. 1-D and 2-D, Specification D2880 Grades No. 0-GT, 1-GT and 2-GT, and Specification D3699 Grades No. 1-K and 2-K and similar middle distillate fuels and blendstocks will usually fall in this viscosity and density range. Test Method D1796 is intended for higher viscosity fuel oils.
1.2The values stated in SI units are to be regarded as standard.
1.2.1Exception—The non-SI values are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Standards | Relationship |
| UNE 51083:1986 | Identical |
| ASTM D 7468 : 2016 : REDLINE | TEST METHOD FOR CUMMINS ISM TEST |
| CEN/TR 16982:2016 | Diesel blends and fuels - Cold filterability issues |
| ISO 4113:2010 | Road vehicles Calibration fluids for diesel injection equipment |
| ASTM D 8048 : 2017-05 | TEST METHOD FOR EVALUATION OF DIESEL ENGINE OILS IN T-13 DIESEL ENGINE |
| MIL-DTL-16884 Revision P:2017 | FUEL, NAVAL DISTILLATE |
| ASTM D 6985 : 2004 | Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications |
| ASTM D 7467 : 2017-03 | SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
| S.R. CEN/TR 16982:2016 | DIESEL BLENDS AND FUELS - COLD FILTERABILITY ISSUES |
| ASTM D 6448 : 2016 : REDLINE | Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
| ASTM D 5967 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
| ASTM D 4176 : 2004 : EDT 1 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D 4176 : 2004 : R2009 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D 6985 : 2004 : REV A | Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010) |
| ASTM D 6838 : 2004 : R2010 | Standard Test Method for Cummins M11 High Soot Test (Withdrawn 2019) |
| ASTM D 6975 : 2004 | Standard Test Method for Cummins M11 EGR Test |
| ASTM D 7583 : 2016 : REDLINE | Standard Test Method for John Deere Coolant Cavitation Test |
| BS ISO 4113:2010 | Road vehicles. Calibration fluids for diesel injection equipment |
| PD CEN/TR 16982:2016 | Diesel blends and fuels. Cold filterability issues |
| A-A-59693 Revision A:2004 | DIESEL FUEL, BIODIESEL BLEND (B20) |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| ASTM D 6894 : 2013 : REDLINE | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
| MIL-PRF-83483 Revision E:2014 | ANTISEIZE THREAD COMPOUND, MOLYBDENUM DISULFIDE-PETROLATUM |
| MIL F 16884 : J | FUEL, NAVAL DISTILLATE |
| ASTM D 4860 : 2014 : REDLINE | TEST METHOD FOR FREE WATER AND PARTICULATE CONTAMINATION IN MIDDLE DISTILLATE FUELS (CLEAR AND BRIGHT NUMERICAL RATING) |
| ASTM D 7666 : 2012 | Standard Specification for Triglyceride Burner Fuel |
| ASTM D 4176 : 2004 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| MIL PRF 16884 : K | FUEL, NAVAL DISTILLATE |
| SAE AIR 810 : 2013 | DEGRADATION LIMITS OF HYDROCARBON-BASED HYDRAULIC FLUIDS, MIL-PRF-5606, MIL-PRF-83282, AND MIL-PRF-87257 USED IN HYDRAULIC TEST STANDS |
| ASTM D 4176 : 2004 : R2014 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D 7156 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine |
| 08/30178041 DC : DRAFT FEB 2008 | BS ISO 4113 - ROAD VEHICLES - CALIBRATION FLUIDS FOR DIESEL INJECTION EQUIPMENT |
| ASTM D 6838 : 2004 | Standard Test Method for Cummins M11 High Soot Test |
| SAE J 313 : 2017 | DIESEL FUELS |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 6975 : 2004 : R2010 | Standard Test Method for Cummins M11 EGR Test (Withdrawn 2019) |
| ASTM D 6483 : 2004 | Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009) |
| ASTM D 8074 : 2016 | Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine |
| ASTM D 6681 : 2017 : REDLINE | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure |
| ASTM D 3699 : 2013-05 | SPECIFICATION FOR KEROSINE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.