ASTM D 2395 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
Available format(s)
Hardcopy , PDF
Superseded date
10-09-2022
Superseded by
Language(s)
English
Published date
07-11-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 07
|
| DocumentType |
Test Method
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the determination of the density and specific gravity (relative density) of wood and wood-based materials to generally desired degrees of accuracy and for specimens of different sizes, shapes, and moisture content conditions. The test method title is indicative of the procedures used or the specific area of use.
| Section | |
| Test Method A—Volume by Measurement | 8 |
| Test Method B—Volume by Water Immersion | 9 |
| Test Method C—Flotation Tube | 10 |
| Test Method D—Forstner Bit | 11 |
| Test Method E—Increment Core | 12 |
| Test Method F—Chips | 13 |
| Test Method G—Full-Size Members | 14 |
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7672 : 2014 : EDT 1 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
| ASTM D 7031 : 2011 : R2019 | Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products |
| ASTM D 3501 : 2005 : REV A : R2018 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 5764 : 1997 : REV A : R2018 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 7147 : 2011 : R2018 | Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers |
| ASTM D 3737 : 2018 : EDT 1 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 143 : 2022 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 7966/D7966M : 2016 | Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 2719 : 2019 | Standard Test Methods for Wood Structural Panels in Shear Through-the-Thickness |
| ASTM D 1185 : 1998 : REV A : R2017 | Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM E 2126 : 2011 : R2018 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM E 1591 : 2013 | Standard Guide for Obtaining Data for Fire Growth Models |
| ASTM D 1761 : 2012 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 3043 : 2017 | Standard Test Methods for Structural Panels in Flexure |
| ASTM D 6643 : 2001 : R2016 | Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance |
| ASTM D 2718 : 2018 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 7857 : 2016 | Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures |
| ASTM D 1037 : 2012 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 8023 : 2017 | Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction |
| ASTM D 6570 : 2018 : REV A | Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber |
| ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 5652 : 2015 | Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products |
| ASTM D 3500 : 2014 | Standard Test Methods for Structural Panels in Tension |
| ASTM E 72 : 2015 | Standard Test Methods of Conducting Strength Tests of Panels for Building Construction |
| ASTM D 3044 : 2016 | Standard Test Method for Shear Modulus of Wood-Based Structural Panels |
| ASTM D 7247 : 2017 | Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures |
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 3499 : 2019 | Standard Test Method for Toughness of Wood Structural Panels |
| ASTM D 198 : 2015 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 6782 : 2013 | Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters |
| ASTM E 2126 : 2019 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM D 7672 : 2019 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
| ASTM D 6782 : 2019 | Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters |
| ASTM D 1761 : 2020 | Standard Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials |
| ASTM E 1591 : 2020 | Standard Guide for Obtaining Data for Fire Growth Models |
| ASTM D 3500 : 2020 | Standard Test Methods for Wood Structural Panels in Tension |
| ASTM D 1037 : 2012 : R2020 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 5652 : 2021 | Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products |
| ASTM D 6874 : 2021 | Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation |
| ASTM D 7147 : 2021 | Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers |
| ASTM D 198 : 2022 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 1666 : 2022 | Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials |
| ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
| ASTM D 2555 : 2005 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 4442 : 2007 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 5456 : 2006 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2014 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2005 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2014 : REV B | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2555 : 2006 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 7438 : 2020 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 2555 : 2017 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2021 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2555 : 2006 : R2011 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2012 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2014 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2017 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM E 1547 : 2009 : R2017 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM D 5456 : 2008 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 7438 : 2013 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 5456 : 2017 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2005 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM E 1547 : 2009 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM D 5456 : 2011 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2010 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 7438 : 2008 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 2555 : 2017 : REV A | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2009 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2001 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 1999 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2555 : 2005 : REV A | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 2555 : 1998 | Standard Test Methods for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2013 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2009 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2019 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2003 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2001 : REV A : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM E 1547 : 1999 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM D 5456 : 2007 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2555 : 1998 : EDT 1 | Standard Test Methods for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2010 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2001 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2013 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2555 : 2015 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2011 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 4442 : 1992 : R1997 : EDT 1 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 5456 : 2018 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 4442 : 1992 : R2003 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 2555 : 2016 | Standard Practice for Establishing Clear Wood Strength Values |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.