ASTM D 2111 : 2010 : R2020
Current
The latest, up-to-date edition.
Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
Hardcopy , PDF
English
01-04-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 26
|
| DocumentType |
Test Method
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the determination of the specific gravity of halogenated organic solvents and solvent admixtures. They define suitable apparatus and procedures and furnish details underlying the interpretation of test data and the selection of numerical limits for agreement among interested persons and agencies.
1.2Three methods are covered as follows:
1.2.1Method A, specific gravity by means of a hydrometer.
1.2.2Method B, specific gravity and density by means of a pycnometer.
Note 1:In referee problems, Method B may be used.
1.2.3Method C, specific gravity and density by means of an electronic densitometer.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5395 : 2003 : R2018 | Standard Specification for Reclaimed Methylene Chloride |
| ASTM D 4079 : 2000 : R2016 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| ASTM D 5616 : 2004 : R2016 | Standard Specification for Reclaimed Trichloroethylene |
| ASTM D 2172/D2172M : 2017 : EDT 1 | Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures |
| ASTM D 4080 : 2015 : R2020 | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| ASTM D 4376 : 2015 : R2020 | Standard Specification for Vapor-Degreasing Grade Perchloroethylene |
| ASTM D 5396 : 2004 : R2020 | Standard Specification for Reclaimed Perchloroethylene |
| ASTM D 4701 : 2000 : R2020 | Standard Specification for Technical Grade Methylene Chloride |
| ASTM D 1992 : 2017 | Standard Guide for Testing Synthetic Plasticizers Used in Rubber |
| ASTM D 4081 : 2016 | Standard Specification for Drycleaning-Grade Perchloroethylene |
| ASTM D 6368 : 2006 : R2018 | Standard Specification for Vapor-Degreasing Solvents Based on <emph type="bdit">normal</emph >-Propyl Bromide and Technical Grade <emph type="bdit">normal</emph >-Propyl Bromide |
| ASTM D 5248 : 2004 : R2020 | Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane |
| ASTM D 5960 : 2003 : R2018 | Standard Specification for Technical Grade Ethylene Dichloride |
| ASTM E 100 : 1995 : R2001 | Standard Specification for ASTM Hydrometers |
| ASTM E 100 : 2019 : R2024 | Standard Specification for ASTM Hydrometers |
| ASTM E 2251 : 2014 : R2021 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM E 2251 : 2014 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM E 100 : 2019 | Standard Specification for ASTM Hydrometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.