ASTM D 2013 : 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice of Preparing Coal Samples for Analysis
Hardcopy , PDF
11-11-2014
English
10-11-2001
Committee |
D 05
|
DocumentType |
Standard Practice
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This practice covers the reduction and division of gross or divided samples up to and including the individual portions for laboratory analysis.
1.2 Reduction and division procedures are prescribed for coals of the following groups:
1.2.1 Group A includes coals that have been cleaned in all sizes.
1.2.2 Group B includes all other coals. Unknown coals are to be considered under Group B.
1.2.3 Group A allows smaller weight laboratory samples to be retained than Group B. These lower weights may be used for particular coals if they have been shown, by using the procedures of Annex A1.2, to give a sample preparation and analysis variance which is no more than 20 % of the total analysis variance.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are provided for information purposes only.
ASTM D 1412/D1412M : 2019 | Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C |
ASTM D 4326 : 2013 | Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence |
ASTM D 346/D346M : 2011 | Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis |
ASTM D 6791 : 2011 : R2017 : EDT 1 | Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke |
ASTM D 3682 : 2013 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
ASTM D 6721 : 2001 : R2015 | Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry |
ASTM D 8214 : 2018 | Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry |
ASTM D 2797/D2797M : 2011 : REV A | Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light |
ASTM D 6414 : 2014 | Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption |
ASTM D 121 : 2015 | Standard Terminology of Coal and Coke |
ASTM D 4371 : 2006 : R2012 | Standard Test Method for Determining the Washability Characteristics of Coal |
ASTM D 4930 : 2006 : R2017 | Standard Test Method for Dust Control Material on Calcined Petroleum Coke |
ASTM D 7307 : 2006 : R2016 | Standard Practice for Sampling of Thermoplastic Traffic Marking Materials |
ASTM D 3175 : 2018 | Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke |
ASTM D 5004 : 2011 : R2017 | Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
ASTM D 8247 : 2019 | Standard Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection |
ASTM D 5515 : 2017 : REV A | Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer |
ASTM D 3180 : 2015 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
ASTM D 6609 : 2017 | Standard Guide for Part-Stream Sampling of Coal |
ASTM D 3302/D3302M : 2017 | Standard Test Method for Total Moisture in Coal |
ASTM D 4292 : 2017 | Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke |
ASTM C 471M : 2017 : REV A : EDT 1 | Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) |
ASTM D 7582 : 2015 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
ASTM D 5187 : 2010 : R2015 : EDT 1 | Standard Test Method for Determination of Crystallite Size (L<inf>c</inf>) of Calcined Petroleum Coke by X-Ray Diffraction |
ASTM D 5709 : 2009 : R2015 | Standard Test Method for Sieve Analysis of Petroleum Coke |
ASTM D 6357 : 2011 | Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry |
ASTM D 6543 : 2017 : REV A | Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers |
ASTM D 720/D720M : 2015 : EDT 1 | Standard Test Method for Free-Swelling Index of Coal |
ASTM D 1214 : 2010 : R2015 : EDT 1 | Standard Test Method for Sieve Analysis of Glass Spheres |
ASTM D 4931 : 2006 : R2017 | Standard Test Method for Gross Moisture in Green Petroleum Coke |
ASTM D 5987 : 1996 : R2015 | Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods (Withdrawn 2020) |
ASTM D 409/D409M : 2016 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method |
ASTM D 3176 : 2015 | Standard Practice for Ultimate Analysis of Coal and Coke |
ASTM D 4606 : 2015 | Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method |
ASTM E 956 : 1983 : R2015 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
ASTM D 6883 : 2017 | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles |
ASTM E 872 : 1982 : R2019 | Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels |
ASTM D 5373 : 2016 | Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke |
ASTM D 2492 : 2002 : R2012 | Standard Test Method for Forms of Sulfur in Coal (Withdrawn 2021) |
ASTM D 5192 : 2009 : R2015 | Standard Practice for Collection of Coal Samples from Core |
ASTM D 8010 : 2018 | Standard Test Method for Determination of Water Soluble Alkali Content in Coal |
ASTM D 2638 : 2010 : R2015 : EDT 1 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
ASTM D 3173/D3173M : 2017 : REV A | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke |
ASTM D 4749 : 1987 : R2012 | Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
ASTM D 6349 : 2013 | Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.