ASTM D 1900 : 1994 : R1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Carbon Black-Sampling Bulk Shipments
Hardcopy , PDF
11-11-2014
English
31-12-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 24
|
| DocumentType |
Standard Practice
|
| Pages |
2
|
| ProductNote |
Reconfirmed 1998
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This practice outlines procedures for the sampling and data reporting of bulk shipments of carbon black in three-compartment hopper rail cars, but the same principles can apply to sampling compartmented bulk highway trailers as well.
Note-The tests to be made on the samples obtained by this practice shall be determined by the purchaser and the manufacturer. The specific details of each procedure are described in appropriate ASTM test methods used for testing carbon black.1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 1514 : 2015 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1512 : 2015 : REV B | Standard Test Methods for Carbon Black—pH Value |
| ASTM D 1513 : 2005 : R2017 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 5817 : 2003 : REV A : R2014 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
| ASTM D 1619 : 2016 : REV A | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 1506 : 2015 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 2414 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 6556 : 2019 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1511 : 2012 : R2017 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM D 5604 : 1996 : R2017 | Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption |
| ASTM D 3493 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 3265 : 2019 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1509 : 2018 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 1510 : 2019 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 5230 : 2014 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1937 : 2018 | Standard Test Method for Carbon Black, Pelleted—Mass Strength |
| ASTM D 3192 : 2009 : R2019 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1508 : 2012 : R2017 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 6845 : 2018 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 3191 : 2010 : R2014 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
| ASTM D 7854 : 2018 : REV C | Standard Test Method for Carbon Black-Void Volume at Mean Pressure |
| ASTM D 1618 : 2018 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 7724 : 2018 | Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM) |
| ASTM D 1506 : 2015 : R2020 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 6845 : 2020 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 1993 : 2018 | Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 7854 : 2018 : REV C : EDT 1 | Standard Test Method for Carbon Black-Void Volume at Mean Pressure |
| ASTM D 5817 : 2020 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
| ASTM D 3493 : 2020 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 7633 : 2013 : R2018 | Standard Test Method for Carbon Black—Carbon Content |
| ASTM D 3265 : 2019 : REV B | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3053 : 2020 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 6556 : 2019 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 3191 : 2010 : R2020 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
| ASTM D 1514 : 2015 : R2020 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1512 : 2015 : REV B : R2020 | Standard Test Methods for Carbon Black—pH Value |
| ASTM D 1619 : 2020 | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 1510 : 2019 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.