ASTM D 1621 : 2016 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Test Method for Compressive Properties of Rigid Cellular Plastics
Available format(s)
PDF
Language(s)
English
Published date
17-05-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 08.01, 2016 Specifies a procedure for determining the compressive properties of rigid cellular materials, particularly expanded plastics.
| Committee |
D 20
|
| DocumentType |
Redline
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method describes a procedure for determining the compressive properties of rigid cellular materials, particularly expanded plastics.
1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 1:This test method and ISO 844 are technically equivalent.
| ASCE 45 05 : 2006 | Standard Guidelines for the Design (45-05), Installation (46-05), and Operation and Maintenance (47-05) of Urban Stormwater Systems |
| MIL P 24249 : A | PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, POUR-IN-PLACE, LARGE SCALE AND INSTALLATION OF |
| MIL F 83671 : A | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
| HH-I-1972-5 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE BOARD ON BOTH SIDES OF THE FOAM |
| ACI 360R : 2010 | GUIDE TO DESIGN OF SLABS-ON-GROUND |
| MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
| HH-I-1972 Base Document:1981 | INSULATION BOARD, THERMAL, FACED, POLYURETHANE OR POLYISOCYANURATE |
| ASTM F 1839 : 2008 | Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments |
| CSA Z245.30 : 2014 | FIELD-APPLIED EXTERNAL COATINGS FOR STEEL PIPELINE SYSTEMS |
| I.S. EN ISO 13590:2004 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| ASTM F 755 : 1999 : EDT 1 | Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
| ASCE/EWRI 12-13, 13-13, 14-13 : 2013 | STANDARD GUIDELINES FOR THE DESIGN, INSTALLATION, AND OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE |
| ASTM C 447 : 2015 : REDLINE | Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations |
| ASTM D 7361 : 2007 : R2012 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM C 1512 : 2010 : R2015 : EDT 1 | Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products |
| ASTM E 1974 : 2011 : REDLINE | SPECIFICATION FOR SHELTER, ELECTRICAL EQUIPMENT S-250/G |
| ASTM D 7425 : 2008 | Standard Specification for Spray Polyurethane Foam Used for Roofing Applications |
| ASTM D 7425/D7425M : 2013 : REDLINE | Standard Specification for Spray Polyurethane Foam Used for Roofing Applications |
| ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
| MIL-C-10933 Revision E:1985 | CHILLED WATER UNITS, BAKERY |
| MIL-P-46847 Revision B:1984 | PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS |
| MIL-PRF-46194 Revision A:1997 | FOAM, RIGID, STRUCTURAL, CLOSED CELL |
| HH-I-1972-3 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE INSULATION BOARD ON ONE SIDE AND ASPHALT/ORGANIC FELT OR ASPHALT/GLASS FIBER FELT ON THE OTHER SIDE OF THE FOAM |
| HH-I-1972-1 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE, FACED WITH ALUMINUM FOIL ON BOTH SIDES OF THE FOAM |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| MIL-B-36970 Revision A:1991 | BOX, BLOOD PRODUCTS SHIPPING |
| ASTM C 1512 : 2010 : R2015 | Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products |
| MIL-P-21929 Revision C:1991 | PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID 2 AND 4 POUNDS PER CUBIC FOOT |
| ASTM F 755 : 1999 : R2005 | Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
| MIL-PRF-83671 Revision B:1997 | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
| ASCE 47 05 : 2006 | GUIDELINES FOR THE OPERATION AND MAINTENANCE OF URBAN STORMWATER SYSTEMS |
| ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| SAE AMS 3572 : 2016 | RESIN POLYURETHANE, FOAM-IN-PLACE, RIGID |
| ASTM F 2150 : 2013 : REDLINE | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
| ASTM F 1839 : 2008 : EDT 1 | Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments |
| ASTM F 1839 : 2008 : EDT 2 | Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments |
| ASTM F 2759 : 2011 : REDLINE | Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
| ASTM D 5469 : 2000 : R2005 | Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems |
| ASTM D 7361 : 2007 : R2018 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM F 561 : 2013 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| NASA MSFC PROC 3687 : 2015 | MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE |
| HH-I-1972-2 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH ASPHALT/ORGANIC FELT, ASPHALT/ASBESTOS FELT OR ASPHALT/GLASS FIBER FELT ON BOTH SIDES OF THE FOAM |
| BS EN ISO 13590:2003 | Small craft. Personal watercraft. Construction and system installation requirements |
| HH-I-1972-4 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH GYPSUM BOARD ON SIDE AND ALUMINUM FOIL OR ASPHALT/ORGANIC FELT ON THE OTHER SIDE OF THE FOAM |
| MIL I 24172 : A | INSULATION, PLASTIC, CELLULAR POLYURETHANE, RIGID, PREFORMED AND FOAM IN PLACE |
| CSA Z245.20 SERIES : 2014 | PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
| SAE J 2621 : 2011 | QUALIFYING AFTERMARKET TWO-COMPONENT STRUCTURAL FOAMS |
| NASA MSFC SPEC 2083 : 2007 | MULTIPROGRAM/PROJECT COMMON USE DOCUMENT FOAM, POLYURETHANE |
| ASTM D 2341 : 1981 | Specification for Rigid Urethane Foam (Withdrawn 1988) |
| MIL-W-70948 Base Document:1991 | WARHEAD SECTION, GM, PRACTICE XM276 LOADING, ASSEMBLING AND PACKING |
| MIL-PRF-24172 Revision B:2004 | Insulation, Plastic, Cellular Foam, Rigid, Preformed and Foam-in-Place |
| ASTM D 5469 : 2000 | Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems |
| ASCE 14 05 : 2006 | GUIDELINES FOR THE OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE |
| MIL-F-47222 Base Document:1974 | FOAM, POLYURETHANE, RIGID |
| ASTM F 1839 : 2008 : R2012 : EDT 1 | Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments |
| SAE AMS PRF 46194 : 2016 | FOAM, RIGID, STRUCTURAL, CLOSED CELL |
| ASCE 12 05 : 2006 | GUIDELINES FOR THE DESIGN OF URBAN SUBSURFACE DRAINAGE |
| ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ACI 223 : 1998 | PRACTICE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE |
| ACI 223R : 2010 | GUIDE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE |
| ASCE 13 05 : 2006 | GUIDELINES FOR THE INSTALLATION OF URBAN SUBSURFACE DRAINAGE |
| ASTM C 1029 : 2015 : REDLINE | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM D 7361 : 2007 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 6817/D6817M : 2017 : REDLINE | Standard Specification for Rigid Cellular Polystyrene Geofoam |
| ASTM C 1594 : 2011 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM F 1839 : 2008 : R2016 | Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments |
| ASTM F 755:1999 | Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
| ASTM E 1730 : 2015 : REDLINE | SPECIFICATION FOR RIGID FOAM FOR USE IN STRUCTURAL SANDWICH PANEL CORES |
| ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| NASA MSFC SPEC 3686 : A2015 | MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE |
| MIL-I-50412 Base Document:1970 | INITIATOR ASSEMBLY FOR PRIMER, ELECTRIC, XM91E1 AND XM117, PARTS FOR |
| CSA A123.21 : 2014 | STANDARD TEST METHOD FOR THE DYNAMIC WIND UPLIFT RESISTANCE OF MEMBRANE-ROOFING SYSTEMS |
| HH-I-1972-6 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH MINERAL FIBERBOARD ON ONE SIDE OF THE FOAM AND GLASS MAT ON THE OTHER SIDE OF THE FOAM |
| MIL-F-81254 Base Document:1965 | FOAM, URETHANE |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| ASTM F 1839 : 2008 : R2012 | Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments |
| API 17U : 2015 | RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
| ASTM D 6388 : 1999 : R2012 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| ASTM C 1594 : 2011 : R2017 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM C 1512 : 2010 | Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products |
| ASTM C 1696 : 2016 : REDLINE | Standard Guide for Industrial Thermal Insulation Systems |
| MIL-S-0055541 Revision H:1991 | SHELTER, ELECTRICAL EQUIPMENT S-250()/G |
| MIL-P-47099 Revision A:1989 | POLYURETHANE FOAM, POLYETHER TYPE, RIGID, FOR PACKAGING AND ENCAPSULATION OF ELECTRONIC COMPONENTS |
| MIL-S-24167 Revision A:1972 | SYNTACTIC MATERIAL, RIGID, POUR-IN-PLACE, STRUCTURAL VOID FILLING |
| AASHTO M 230 : 2007 | SPECIFICATION FOR EXPANDED AND EXTRUDED FOAM BOARD (POLYSTYRENE) |
| MIL-DTL-24688 Revision A:2011 | INSULATION, THERMAL AND ACOUSTIC ABSORPTIVE, CELLULAR POLYIMIDE FOAM |
| MIL-P-40619 Revision B:1991 | PLASTIC MATERIAL, CELLULAR, POLYSTYRENE (FOR BUOYANCY APPLICATIONS) |
| ASTM C 1013 : 1994 | Specification for Faced Rigid Cellular Polyisocyanurate Roof Insulation (Withdrawn 1997) |
| NF EN ISO 13590 : 2004 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| ASTM D 7119 : 2007 | Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| ASTM F 755 : 1999 : R2011 | Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
| ASTM D 6388 : 1999 : R2005 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| ASTM D 6388:1999 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| DIN EN ISO 13590:2004-11 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM E 83 : 2016 : REDLINE | Standard Practice for Verification and Classification of Extensometer Systems |
| ISO 844:2014 | Rigid cellular plastics Determination of compression properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.