ASTM D 1248 : 2016 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
Available format(s)
PDF
Language(s)
English
Published date
15-11-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 08.01, 2017 Gives for the identification of polyethylene plastics extrusion materials for wire and cable in such a manner that the seller and the purchaser can agree on the acceptability of different commercial lots or shipments.
| Committee |
D 20
|
| DocumentType |
Redline
|
| Pages |
10
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This specification provides for the identification of polyethylene plastics extrusion materials for wire and cable in such a manner that the seller and the purchaser can agree on the acceptability of different commercial lots or shipments. The tests involved in this specification are intended to provide information for identifying materials according to the types, classes, categories, and grades covered. It is not the function of this specification to provide specific engineering data for design purposes.
1.2This specification does not allow for the use of recycled plastics (see Note 3).
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.4The following safety hazards caveat pertains only to the test method portion, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 1:There is no known ISO equivalent to this standard.
Note 2:This standard has undergone major revision from the reapproval of 1989 and now covers only polyethylene for wire and cable applications. For information regarding molding and extrusion materials, see Specification D4976. For information regarding plastic pipe materials, see Specification D3350.
Note 3:See Guide D7209and 3.1.2 of this standard for information and definitions related to recycled plastics.
| CSA C22.2 No. 35:2009 | EXTRA-LOW-VOLTAGE CONTROL CIRCUIT CABLE, LOW-ENERGY CONTROL CABLE, AND EXTRA-LOW-VOLTAGE CONTROL CABLE |
| ASTM D 3218 : 2007 | Standard Specification for Polyolefin Monofilaments |
| ASTM D 2308 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| GR 1398 CORE : ISSUE 1 REV 1 | GENERIC REQUIREMENTS FOR COAXIAL DROP CABLE |
| ASTM D 2295 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| MIL C 55036 : A | CABLE, TELEPHONE WM-130( )/G |
| AWWA C700 : 2015 | COLD-WATER METERS - DISPLACEMENT TYPE, METAL ALLOY MAIN CASE |
| ASTM D 1351 : 2014 : REDLINE | Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable |
| ASTM D 3554 : 2007 : R2018 | Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation |
| ASTM D 2293 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2104 : 2003 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) |
| ASTM D 2303 : 1997 : R2004 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 4967 : 1999 : R2004 : EDT 1 | Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables |
| MIL-DTL-23806 Revision B:2007 | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, FOAM DIELECTRIC, GENERAL SPECIFICATION FOR |
| ASTM D 2294 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2318 : 1998 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| MIL-DTL-28830 Revision F:2016 | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, CORRUGATED OUTER CONDUCTOR, GENERAL SPECIFICATION FOR |
| SCTE 15 : 2016 | SPECIFICATION FOR TRUNK, FEEDER AND DISTRIBUTION COAXIAL CABLE |
| ASTM D 2300 : 2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA Z662.1 : 2013 | COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS |
| CSA B66 : 2016 | DESIGN, MATERIAL, AND MANUFACTURING REQUIREMENTS FOR PREFABRICATED SEPTIC TANKS AND SEWAGE HOLDING TANKS |
| NACE RP 05 72 : 0 | DESIGN, INSTALLATION, OPERATION AND MAINTENANCE OF IMPRESSED CURRENT DEEP GROUNDBEDS |
| ASTM D 3554 : 2007 : R2013 | Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation |
| SMA 3001 : 1987 | SPECIFICATIONS FOR ALUMINUM SWINGING SCREEN DOORS |
| ASTM D 2952 : 1995 | Specification for Ethylene Plastics (Withdrawn 1999) |
| CSA C22.2 No. 239 : 2017 | CONTROL AND INSTRUMENTATION CABLES |
| ASTM D 3334 : 1980 | Methods of Testing Fabrics Woven from Polyolefin Monofilaments (Withdrawn 1990) |
| ASTM D 5477 : 2011 | Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) |
| ASTM D 3218 : 2007 : R2018 | Standard Specification for Polyolefin Monofilaments |
| ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| MIL-DTL-24800 Base Document:1996 | CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
| ASTM D 4703 : 2016 : REDLINE | Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets |
| ANSI/AWWA C710 : 2015 | COLD-WATER METERS - DISPLACEMENT TYPE, PLASTIC MAIN CASE |
| MIL-DTL-16878 Revision H:2012 | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL-PRF-12732 Revision F:2010 | HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW |
| ASTM D 2293 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3218 : 2007 : R2012 | Standard Specification for Polyolefin Monofilaments |
| ASTM D 2238 : 1992 : R2004 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm |
| ASTM D 2318 : 1998 : R2003 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2293 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| AASHTO R 69 : 2015 | PRACTICE FOR DETERMINATION OF LONG-TERM STRENGTH FOR GEOSYNTHETIC REINFORCEMENT |
| ASTM D 2295 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2293 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2303 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2296 : 2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| SCTE 177 : 2012 | SPECIFICATION FOR BRAIDED 75 OHMS, MINI-SERIES QUAD SHIELD COAXIAL CABLE FOR CMTS AND SDI CABLES |
| SMA 2006 : 87(R1998) | SPECIFICATIONS FOR ALUMINUM SLIDING SCREEN DOORS |
| NACE SP 05 72 : 2007 | DESIGN, INSTALLATION, OPERATION, AND MAINTENANCE OF IMPRESSED CURRENT DEEP ANODE BEDS |
| ASTM D 2308 :2007 | Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ASTM D 7436 : 2017 : REDLINE | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
| ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| NEMA WC 55 : 1992(R1999) | INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
| NEMA TC 5 : 1990 | CORRUGATED POLYOLEFIN COILABLE PLASTIC UTILITIES DUCT |
| ASTM D 2307 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3287 : 1989 | Specification for Biaxially Oriented Polyethylene (PEO) Plastic Pipe (SDR-PR) Based on Controlled Outside Diameter (Withdrawn 1989) |
| ASTM D 2288 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 4565 : 2015 : REDLINE | Standard Test Methods for Physical and Environmental Performance Properties of <brk/>Insulations and Jackets for Telecommunications Wire and Cable |
| IEEE 532-2007 REDLINE | IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables |
| ASTM D 2300 : 2008 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2319/D2319M : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| A-A-59519 Base Document:1999 | LAST, FOOTWEAR FWU-5/P |
| SCTE 71 : 2008 | SPECIFICATION FOR BRAIDED, 75 OHM, COAXIAL, MULTI-PURPOSE CABLE |
| MIL C 24643 : A | CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| ASTM D 3554 : 2007 | Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation |
| UU B 001254 : NOTICE 1 | BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER |
| SMA 1004 : 1987 | SPECIFICATIONS FOR ALUMINUM TUBULAR FRAME SCREENS FOR WINDOWS |
| ASTM D 2318 : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2238 : 1992 : R2012 : EDT 1 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup> (Withdrawn 2021) |
| AWWA C708 : 2015 | COLD-WATER METERS - MULTIJET TYPE |
| AWWA C713 : 2015 | COLD-WATER METERS - FLUIDIC-OSCILLATOR TYPE |
| AWWA C704 : 2015 | PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS |
| CSA C22.2 No. 35 : 2009 : R2014 | EXTRA-LOW-VOLTAGE CONTROL CIRCUIT CABLE, LOW-ENERGY CONTROL CABLE, AND EXTRA-LOW-VOLTAGE CONTROL CABLE |
| ICEA S 105-692 : 2011 | 600 VOLT SINGLE LAYER THERMOSET INSULATED UTILITY UNDERGROUND DISTRIBUTION CABLES |
| ICEA S 89 648 : 2011 | AERIAL SERVICE WIRE TECHNICAL REQUIREMENTS |
| ASTM D 2633 : 2013-03 | TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE |
| ASTM D 4314 : 2012 | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable (Withdrawn 2017) |
| ASTM D 2308 : 2007 : R2013 | Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| AWWA C712 : 2019 | COLD-WATER METERS - SINGLEJET TYPE |
| NASA KSC SPEC E 0031 : 2008 | CABLES, ELECTRICAL, SPECIFICATION FOR |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| CSA B182.7 : 2006 | PSM TYPE MULTILAYER POLYVINYLCHLORIDE (PVC) SEWER PIPE HAVING REPROCESSED-RECYCLED CONTENT |
| ASTM D 2296 : 2001 : R2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM F 771 : 1999 : R2005 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems (Withdrawn 2014) |
| ASTM D 2310 : 2006 : R2012 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM F 771 : 1999 : EDT 1 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
| MIL C 22931 : B | CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| ASTM C 586 : 2011 : REDLINE | TEST METHOD FOR POTENTIAL ALKALI REACTIVITY OF CARBONATE ROCKS AS CONCRETE AGGREGATES (ROCK-CYLINDER METHOD) |
| ASTM D 2310 : 2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| SCTE 74 : 2011 | SPECIFICATION FOR BRAIDED 75 OHM FLEXIBLE RF COAXIAL DROP CABLE |
| CGSB 152.4 : 1993 | DRY PICKUP, COMMERCIAL CANISTER VACUUM CLEANER |
| MIL-DTL-22931 Revision D:2013 | CABLES, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-E-24759 Base Document:1991 | Educator Assembly, In-Line, 90 Gallons per Minute, Portable Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| SCTE 100 : 2010 | SPECIFICATION FOR 75 OHM SMOOTH ALUMINUM SUBSCRIBER ACCESS CABLE |
| MIL-F-36748 Base Document:1971 | FUNNEL, COMMON, LABORATORY POLYETHYLENE, OUTSIDE RIBBED |
| ASTM D 2238 : 1992 : R1999 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm |
| ASTM D 2951 : 2000 | Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking (Withdrawn 2006) |
| ICEA S56.434 : 83(R1991) | POLYOLEFIN INSULATED COMMUNICATIONS CABLES FOR OUTDOOR USE |
| ASTM D 4967 : 1999 : R2009 | Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables |
| MIL-C-19547 Revision B:1969 | CABLE, ELECTRICAL, SPECIAL PURPOSE, SHORE USE |
| ASTM D 2854 : 1996 : R2000 | Standard Test Method for Apparent Density of Activated Carbon |
| MIL-DTL-26666 Revision G:2006 | Hose Assembly, Pneumatic, High Pressure |
| ASTM D 2294 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3349 : 2017 : REDLINE | Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black |
| ASTM D 2307 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| AWWA C712 : 2015 | COLD-WATER METERS - SINGLEJET TYPE |
| CGSB 152.3 : 1993 | WET AND DRY PICKUP, COMMERCIAL CANISTER VACUUM CLEANER |
| ASTM D 4967 : 1999 | Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables |
| CSA C22.2 No. 35 : 2009 : INC : UPD 2 : 2014 | EXTRA-LOW-VOLTAGE CONTROL CIRCUIT CABLE, LOW-ENERGY CONTROL CABLE, AND EXTRA-LOW-VOLTAGE CONTROL CABLE |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM D 2308 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2319/D2319M : 1998 : R2008e1 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA C447 : 94(R1999) | DESIGN AND INSTALLATION OF EARTH ENERGY HEAT PUMP SYSTEMS FOR COMMERCIAL AND INSTITUTIONAL BUILDINGS |
| MIL W 16878 : F | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| ASTM D 2307 : 2007A | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2301 : 2010 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2301 : 2010 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| AASHTO PP 66 : 2013 | PRACTICE FOR DETERMINATION OF LONG-TERM STRENGTH FOR GEOSYNTHETIC REINFORCEMENT |
| AWWA M28 : 2014 | REHABILITATION OF WATER MAINS |
| MIL-DTL-55668 Revision D:2009 | CORD, ELECTRICAL; AUDIO, SUBMINIATURE (RETRACTILE AND STRAIGHT) |
| ASTM D 2656 : 2013 : REDLINE | Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V |
| MIL-DTL-28751 Revision A:2005 | Cable, Radio Frequency RG-373/U |
| MIL H 26666 : D (1) | HOSE ASSEMBLY, PNEUMATIC, HIGH PRESSURE |
| MIL-DTL-55036 Revision C:2011 | CABLE, TELEPHONE, WM - 130()/G |
| ASTM D 2307 : 2007A : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM F 1335 : 2004 | Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) |
| ASTM D 2294 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| MIL DTL 17 : J | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| MIL-DTL-3432 Revision J:2009 | CABLES, (POWER AND SPECIAL PURPOSE) AND WIRE, ELECTRICAL (300 AND 600 VOLTS) |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM A 74 : 2017 : REDLINE | Standard Specification for Cast Iron Soil Pipe and Fittings |
| SCTE 117 : 2010 | SPECIFICATION FOR BRAIDED 75 OHMS, MINI-SERIES BROADBAND COAXIAL CABLE |
| ASAE S376.1 : 1992 | DESIGN, INSTALLATION AND PERFORMANCE OF UNDERGROUND, THERMOPLASTIC IRRIGATION PIPELINES |
| SCTE 244 : 2018 | SPECIFICATION FOR BRAIDED 75 OHMS, MICRO-SERIES QUAD SHIELD COAXIAL CABLE FOR CONNECTIVITY AND DENSE CCAP/EDGE QAM APPLICATIONS |
| ASTM D 4967 : 1999 : R2013 | Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables |
| CSA C22.2 NO. 129:10 (R2019) | Neutral-supported cables |
| ASTM F 432 : 2013 : REDLINE | Standard Specification for Roof and Rock Bolts and Accessories |
| ASTM F 771 : 1999 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
| ASTM D 2854 : 2009 : R2014 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM D 2447 : 2003 | Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) |
| ASTM D 1693 : 2015 : REDLINE | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
| IEEE 789-2013 | IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments |
| ASME A112.6.4 : 2003 : R2008 | ROOF, DECK, AND BALCONY DRAINS |
| ASME RTP 1 : 2015 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
| NEMA WC 63.2:1996(R2003) | Performance Standard for Coaxial Premise Data Communications Cables |
| ASME RTP-1 : 2017 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
| ASME A112.6.4 : 2003 : R2012 | ROOF, DECK, AND BALCONY DRAINS |
| ASME A112.6.4 : 2003 | ROOF, DECK, AND BALCONY DRAINS |
| ASTM D 3349 : 2017 : REDLINE | Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black |
| L-P-390 Revision C:1971 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY) |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 2839 : 2016 : REDLINE | Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene |
| ASTM D 6360 : 2015 : REDLINE | Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM G 153 : 2013 : REDLINE | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| ASTM D 7209 : 2006 | Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015) |
| ASTM D 1238 : 2013 : REDLINE | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
| ASTM D 4329 : 2013 : REDLINE | Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM D 1603 : 2014 : REDLINE | Standard Test Method for Carbon Black Content in Olefin Plastics |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2633 : 2013-03 | TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE |
| ASTM D 2951 : 2000 | Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking (Withdrawn 2006) |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM D 257 : 2014 : REDLINE | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
| ASTM D 2565 : 2016 : REDLINE | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
| ASTM D 4703 : 2016 : REDLINE | Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D 3892 : 2015 : REDLINE | PRACTICE FOR PACKAGING/PACKING OF PLASTICS |
| ASTM D 1693 : 2015 : REDLINE | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.