ASTM D 123 : 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Textiles
Hardcopy , PDF
12-08-2020
English
31-12-2010
Committee |
D 13
|
DocumentType |
Reference Material
|
Pages |
79
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This standard is the compilation of all terminology developed by Committee D-13 on Textiles.
1.1.1 This terminology, mostly definitions, is unique to the textile industry. Meanings of the same terms used outside the textile industry can be found in other compilations or in dictionaries of general usage.
1.1.2 The specific D13 subcommittee which has jurisdictional responsibility for every item is the first attribution noted after the definition. The standards in which the terms and definitions appear are listed by number after the jurisdiction for the term. The wording of an entry cannot be changed without the approval of the subcommittee which has jurisdiction and subcommittee D13.92 on Terminology. See 1.2, 1.3, 1.4.
1.2 In addition to being a specialized dictionary, Terminology D 123 is also a tool for managing the committee's terminology. This includes finding, eliminating, and preventing redundancies, that is, where two or more terms relating the same concept are defined in different words. Redundancies can also occur when one definition is used for two or more terms.
1.3 While the review for clarity and form are the responsibility of the terminology subcommittee, the concept of managing terminology is the broad responsibility of every writer of standards, specifically the task group leader and subcommittee chairman.
1.4 Subsequent to a listing of specific subcommittee compilations, this standard is comprised of the following sections that are listed in the order in which they appear.
1.4.1 Alphabetical listing of terms and respective definitions.
1.4.2 Ready reference guide.
1.4.3 Annex A1 Generic names and definitions of manufactured fibers.
1.4.4 Annex A2 Classification of manufactured and natural fibers.
1.4.5 Annex A3 Terms relating to the hand of fabrics.
1.4.6 Annex A4Termninology revision procedures.
1.4.7 Annex A5 Industry accepted synonyms.
1.4.8 Appendix X1 Other sources of textile terminology.
ASTM D 4852 : 2018 | Standard Practice for Evaluation of Attached Upholstery Fabrics |
ASTM D 6575/D6575M : 2016 | Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs) |
ASTM D 1422/D1422M : 2013 : R2020 | Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method |
ASTM D 6860/D6860M : 2019 | Standard Tables of Body Measurements for Boys, Sizes 4H to 20H Husky |
ASTM D 1118/D1118M : 1995 : R2017 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles (Withdrawn 2022) |
ASTM D 3884 : 2009 : R2017 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
ASTM D 7641 : 2010 : R2014 : EDT 1 | Standard Guide for Textile Fibers |
ASTM D 5261 : 2010 : R2018 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
ASTM D 6612 : 2000 : R2016 | Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester |
ASTM D 3775 : 2017 : EDT 1 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
ASTM D 3692 : 1989 : R2016 | Standard Practice for Selection of Zippers for Care-Labeled Apparel and Household Furnishings |
ASTM D 7984 : 2016 | Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument |
ASTM C 1086 : 2020 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
ASTM D 646 : 2013 | Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) (Withdrawn 2022) |
ASTM D 7019 : 2020 | Standard Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics |
ASTM D 4155 : 2014 | Standard Performance Specification for Women’s and Girls’ Woven Sportswear, Shorts, Slacks, and Suiting Fabrics |
ASTM D 6207 : 2003 : R2019 | Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature |
ASTM D 4830/D4830M : 1998 : R2014 : EDT 1 | Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing |
ASTM D 5035 : 2011 : R2019 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 578/D578M : 2018 | Standard Specification for Glass Fiber Strands |
ASTM D 5262 : 2007 : R2016 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
ASTM D 2050 : 2019 | Standard Terminology Relating to Subassemblies Used in the Manufacture of Textiles |
ASTM D 4028/D4028M : 2013 | Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn |
ASTM D 4115 : 2020 | Standard Performance Specification for Women's and Girls' Knitted and Woven Dress Glove Fabrics |
ASTM D 7570 : 2017 | Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering |
ASTM D 7799 : 2012 : REV A : R2021 | Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings |
ASTM D 6828 : 2002 : R2019 | Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure |
ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
ASTM F 1002 : 2015 | Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
ASTM D 6458/D6458M : 2019 | Standard Tables of Body Measurements for Boys, Sizes 4 to 20 Slim and 2 to 20 Regular |
ASTM D 1578 : 1993 : R2016 | Standard Test Method for Breaking Strength of Yarn in Skein Form |
ASTM D 6213 : 2017 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
ASTM D 7556 : 2010 : R2019 | Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests |
ASTM D 6193 : 2016 : R2020 | Standard Practice for Stitches and Seams |
ASTM D 6701 : 2016 | Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers |
ASTM D 4632/D4632M : 2015 : REV A | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM D 4975 : 2014 | Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel (Withdrawn 2023) |
ASTM D 7880/D7880M : 2013 | Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022) |
ASTM D 8007 : 2015 : R2019 | Standard Test Method for Wale and Course Count of Weft Knitted Fabrics |
ASTM D 5493 : 2006 : R2016 | Standard Test Method for Permittivity of Geotextiles Under Load |
ASTM D 2494 : 2013 : R2020 | Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow |
ASTM D 7239 : 2013 : R2018 | Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications |
ASTM D 1282 : 2018 | Standard Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top, Card Sliver, and Scoured Wool |
ASTM F 2992/F2992M : 2015 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment |
ASTM D 4848 : 1998 : R2018 | Standard Terminology Related to Force, Deformation and Related Properties of Textiles |
ASTM D 4966 : 2012 : R2016 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) |
ASTM D 5034 : 2009 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
ASTM D 6283 : 2021 | Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings |
ASTM D 6611 : 2016 | Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance |
ASTM D 7559/D7559M : 2009 : R2020 | Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions |
ASTM D 2062 : 2003 : R2014 | Standard Test Methods for Operability of Zippers |
ASTM D 5823 : 2019 | Standard Test Method for Tuft Height of Pile Floor Coverings |
ASTM D 1334 : 2018 | Standard Test Method for Wool Content of Raw Wool—Commercial Scale |
ASTM D 1571/D1571M : 1995 : R2017 | Standard Specification for Woven Asbestos Cloth (Withdrawn 2022) |
ASTM D 1060 : 2010 : R2018 | Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present |
ASTM D 6588/D6588M : 2011 : R2016 | Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test) |
ASTM D 1425/D1425M : 2014 : R2020 | Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment |
ASTM D 6119 : 2019 | Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic |
ASTM D 5793 : 2018 | Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings |
ASTM D 1575 : 2013 | Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver (Withdrawn 2022) |
ASTM F 1358/F1358M : 2020 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
ASTM D 4974 : 2004 : R2016 | Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven |
ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM D 6322 : 2015 | Standard Guide to International Test Methods Associated with Textile Care Procedures (Withdrawn 2024) |
ASTM D 5433 : 2012 : R2019 | Standard Performance Specification for Towel Products for Institutional and Household Use |
ASTM D 4151 : 2018 | Standard Test Method for Flammability of Blankets |
ASTM D 7330 : 2015 | Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales |
ASTM D 2059/D2059M : 2003 : R2014 | Standard Test Method for Resistance of Zippers to Salt Spray (Fog) |
ASTM D 2102 : 2002 : R2018 | Standard Test Method for Shrinkage of Textile Fibers (Bundle Test) |
ASTM D 2053 : 1999 : R2015 | Standard Test Method for Colorfastness of Zippers to Light |
ASTM D 4533/D4533M : 2015 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 6389 : 2017 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
ASTM D 3412/D3412M : 2013 : R2020 | Standard Test Method for Coefficient of Friction, Yarn to Yarn |
ASTM D 6770 : 2007 : R2019 | Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method) |
ASTM D 7020 : 2014 | Standard Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics |
ASTM D 1424 : 2009 : R2019 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
ASTM D 2118 : 2018 | Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its Products |
ASTM F 2894 : 2019 | Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
ASTM D 3218 : 2007 : R2018 | Standard Specification for Polyolefin Monofilaments |
ASTM D 7506/D7506M : 2017 | Standard Test Method for Pocket Reinforcement |
ASTM D 1283 : 2005 : R2013 | Standard Test Method for Alkali-Solubility of Wools (Withdrawn 2022) |
ASTM D 7268 : 2014 | Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear |
ASTM D 5587 : 2015 : R2019 | Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure |
ASTM D 6717 : 2007 : R2018 | Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens) |
ASTM D 5591 : 2004 : R2016 | Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester |
ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
ASTM D 6476 : 2012 : R2017 : EDT 1 | Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics |
ASTM D 3374/D3374M : 2014 | Standard Specification for Vinyl-Coated Glass Yarns (Withdrawn 2023) |
ASTM D 7811 : 2013 : R2017 | Standard Test Method for Bow and Skew Using a Measuring Tool |
ASTM F 1930 : 2018 | Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin |
ASTM E 1590 : 2017 | Standard Test Method for Fire Testing of Mattresses |
ASTM D 4873/D4873M : 2017 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
ASTM D 2462 : 2013 | Standard Test Method for Moisture in Wool by Distillation With Toluene (Withdrawn 2022) |
ASTM D 5171 : 2015 : R2020 | Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons |
ASTM D 2724 : 2019 | Standard Test Method for Bond Strength of Bonded, Fused, and Laminated Apparel Fabrics |
ASTM D 7076 : 2010 : R2015 : EDT 1 | Standard Test Method for Measurement of Shives in Retted Flax |
ASTM D 885/D885M : 2010 : REV A : R2014 : EDT 1 | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers (Withdrawn 2023) |
ASTM D 3882 : 2008 : R2020 | Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
ASTM D 5496 : 2015 : R2020 | Standard Practice for In-Field Immersion Testing of Geosynthetics |
ASTM D 3782 : 2014 | Standard Performance Specification for Men’s and Boys’ Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics |
ASTM D 4833/D4833M : 2007 : R2020 | Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products |
ASTM D 1113 : 2013 | Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool (Withdrawn 2022) |
ASTM D 6674 : 2001 : R2017 | Standard Guide for Proficiency Test Program for Fabrics |
ASTM D 6477 : 2013 : EDT 1 | Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics (Withdrawn 2022) |
ASTM D 4724/D4724M : 2021 | Standard Test Method for Entanglements in Filament Yarns by Needle Insertion |
ASTM D 5822 : 2013 : R2019 | Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions |
ASTM D 580/D580M : 2015 | Standard Specification for Greige Woven Glass Tapes and Webbings |
ASTM D 4231 : 2014 | Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts |
ASTM D 5646 : 2013 : R2018 | Standard Terminology Relating to Seams and Stitches Used in Home Sewing |
ASTM D 2060 : 2014 : EDT 1 | Standard Test Methods for Measuring Zipper Dimensions |
ASTM D 7878/D7878M : 2013 : EDT 1 | Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P (Withdrawn 2022) |
ASTM D 6706 : 2001 : R2013 | Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
ASTM D 1230 : 2017 | Standard Test Method for Flammability of Apparel Textiles |
ASTM D 2594 : 2020 | Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power |
ASTM F 955 : 2015 | Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances |
ASTM D 2058 : 2003 : R2014 | Standard Test Method for Durability of Finish of Zippers to Drycleaning |
ASTM D 519 : 2004 : R2013 | Standard Test Method for Length of Fiber in Wool Top (Withdrawn 2022) |
ASTM D 7879 : 2013 : R2018 | Standard Test Method for Determining Flax Fiber Widths Using Image Analysis |
ASTM D 3780 : 2014 | Standard Performance Specification for Men’s and Boys’ Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics |
ASTM D 4235 : 2020 | Standard Performance Specification for Women's and Girls' Knitted Blouse and Dress Fabrics |
ASTM D 1388 : 2018 | Standard Test Method for Stiffness of Fabrics |
ASTM D 5807 : 2018 | Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions |
ASTM D 6962 : 2020 | Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings |
ASTM D 5428 : 2008 : R2019 | Standard Practice for Evaluating the Performance of Inflatable Restraint Modules |
ASTM E 284 : 2017 | Standard Terminology of Appearance |
ASTM D 4118 : 2015 | Standard Performance Specification for Women's Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics |
ASTM D 5378 : 2012 : R2019 | Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use |
ASTM D 7571 : 2020 | Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame |
ASTM D 6478 : 2010 : R2019 | Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints |
ASTM D 4120 : 2007 : R2018 | Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests |
ASTM D 3693 : 2002 : R2016 | Standard Specification for Labeled Length per Holder of Sewing Thread |
ASTM D 1059 : 2017 | Standard Test Method for Yarn Number Based on Short-Length Specimens |
ASTM D 3597 : 2002 : R2018 : EDT 1 | Standard Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked |
ASTM D 2525 : 2013 | Standard Practice for Sampling Wool for Moisture (Withdrawn 2022) |
ASTM E 2228 : 2019 | Standard Guide for Microscopical Examination of Textile Fibers |
ASTM D 5431 : 2008 : R2019 | Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use |
ASTM D 1987 : 2018 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
ASTM D 2816 : 2018 | Standard Test Method for Cashmere Coarse-Hair Content in Cashmere |
ASTM D 2259 : 2002 : R2016 : EDT 1 | Standard Test Method for Shrinkage of Yarns |
ASTM D 2859 : 2016 | Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials |
ASTM D 1777 : 1996 : R2019 | Standard Test Method for Thickness of Textile Materials |
ASTM F 1752 : 1996 : R2014 | Standard Test Method for Archery Bow Component—Cord Material (Withdrawn 2023) |
ASTM E 3260 : 2021 | Standard Guide for Forensic Examination and Comparison of Pressure Sensitive Tapes |
ASTM D 6540 : 2017 | Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering |
ASTM D 5489 : 2018 | Standard Guide for Care Symbols for Care Instructions on Textile Products |
ASTM D 5427 : 2009 : R2019 | Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics |
ASTM D 5199 : 2012 : R2019 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 3690 : 2019 | Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics—Indoor |
ASTM D 1518 : 2014 | Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate (Withdrawn 2023) |
ASTM D 3994 : 2014 | Standard Performance Specification for Woven Swimwear Fabrics |
ASTM D 7507 : 2014 | Standard Specification for Woven High Stretch Fabrics Used in Apparel |
ASTM D 4970/D4970M : 2016 : EDT 3 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester |
ASTM D 4030/D4030M : 2015 | Standard Specification for Glass Fiber Cord and Sewing Thread |
ASTM D 7748/D7748M : 2014 : EDT 1 | Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products |
ASTM D 7642 : 2012 : R2020 | Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments |
ASTM D 2817 : 2018 | Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere |
ASTM D 4232 : 2014 | Standard Performance Specification for Men’s and Women’s Dress and Vocational Career Apparel Fabrics |
ASTM D 3217/D3217M : 2020 | Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations |
ASTM D 2130 : 2013 | Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection (Withdrawn 2022) |
ASTM D 4964 : 1996 : R2020 | Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
ASTM D 5417 : 2016 | Standard Practice for Operation of the Vettermann Drum Tester |
ASTM E 800 : 2020 | Standard Guide for Measurement of Gases Present or Generated During Fires |
ASTM D 6798 : 2002 : R2018 | Standard Terminology Relating to Flax and Linen |
ASTM D 7744/D7744M : 2020 | Standard Test Methods for Tensile Testing of High Performance Polyethylene Films |
ASTM D 1234 : 2013 | Standard Test Method of Sampling and Testing Staple Length of Grease Wool (Withdrawn 2022) |
ASTM D 4111 : 2012 : R2019 | Standard Performance Specification for Woven Napery and Tablecloth Fabrics: Household and Institutional |
ASTM F 1449 : 2020 | Standard Guide for Industrial Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing |
ASTM E 1549/E1549M : 2013 : R2016 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
ASTM D 7025 : 2009 : R2015 : EDT 1 | Standard Test Method for Assessing Clean Flax Fiber Fineness |
ASTM D 4510 : 2018 | Standard Test Method for Counting Partial Cleavages in Wool and Other Animal Fibers |
ASTM D 1294 : 2005 : R2013 | Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length (Withdrawn 2022) |
ASTM D 7409 : 2015 : R2020 | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
ASTM D 2054 : 1999 : R2015 | Standard Test Method for Colorfastness of Zipper Tapes to Crocking |
ASTM D 7842/D7842M : 2012 : R2016 | Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons |
ASTM D 3773/D3773M : 2010 : R2019 | Standard Test Methods for Length of Woven Fabric |
ASTM D 1336 : 2007 : R2019 | Standard Test Method for Distortion of Yarn in Woven Fabrics |
ASTM F 1790/F1790M : 2015 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment |
ASTM D 1684 : 2007 : R2020 | Standard Practice for Lighting Cotton Classing Rooms for Color Grading |
ASTM D 4389/D4389M : 2016 | Standard Specification for Finished Glass Fabrics Woven From Rovings |
ASTM D 1668/D1668M : 1997 : REV A : R2014 : EDT 1 | Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
ASTM D 6321/D6321M : 2014 | Standard Practice for the Evaluation of Machine Washable T-Shirts |
ASTM D 2057 : 2005 : R2015 | Standard Test Method for Colorfastness of Zippers to Laundering |
ASTM D 4849 : 2020 | Standard Terminology Related to Yarns and Fibers |
ASTM D 4032 : 2008 : R2016 | Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure |
ASTM D 2051 : 2014 | Standard Test Method for Durability of Finish of Zippers to Laundering |
ASTM D 4721 : 2012 : R2019 | Standard Practice for Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories |
ASTM F 2621/F2621M : 2019 | Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products and Evaluating other Products in an Electric Arc Exposure |
ASTM E 1822 : 2017 | Standard Test Method for Fire Testing of Stacked Chairs |
ASTM D 6961/D6961M : 2009 : R2015 : EDT 1 | Standard Test Method for Color Measurement of Flax Fiber |
ASTM D 861 : 2007 : R2018 | Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns |
ASTM D 4157 : 2013 : R2017 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
ASTM D 4113 : 2002 : R2019 | Standard Performance Specification for Woven Slipcover Fabrics |
ASTM D 2812 : 2007 : R2021 | Standard Test Method for Non-Lint Content of Cotton |
ASTM D 7022 : 2013 : EDT 2 | Standard Terminology Relating to Apparel (Withdrawn 2022) |
ASTM D 4771 : 2019 | Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture |
ASTM F 2207 : 2006 : R2019 | Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
ASTM D 4685/D4685M : 2015 : R2020 | Standard Test Method for Pile Fabric Abrasion |
ASTM D 6603 : 2019 | Standard Specification for Labeling of UV-Protective Textiles |
ASTM D 7269/D7269M : 2020 | Standard Test Methods for Tensile Testing of Aramid Yarns |
ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
ASTM D 4969 : 2017 | Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
ASTM D 2946 : 2001 : R2018 | Standard Terminology for Asbestos and Asbestos–Cement Products (Withdrawn 2022) |
ASTM D 3996 : 2014 | Standard Performance Specification for Knit Swimwear Fabrics |
ASTM D 3333 : 2007 : R2018 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
ASTM D 6775 : 2013 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material |
ASTM D 6829 : 2002 : R2015 | Standard Tables of Body Measurements for Juniors, Sizes 0 to 19 (Withdrawn 2024) |
ASTM D 2256/D2256M : 2010 : R2015 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
ASTM D 7140/D7140M : 2013 : R2017 | Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials |
ASTM D 6720 : 2007 : R2018 | Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method) |
ASTM F 1870 : 2016 | Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
ASTM D 6466 : 2010 : R2018 | Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser |
ASTM D 4035 : 2014 | Standard Performance Specification for Knitted Necktie and Scarf Fabrics |
ASTM D 3025 : 2007 : R2021 | Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards |
ASTM F 1550 : 2016 | Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter |
ASTM D 629 : 2015 | Standard Test Methods for Quantitative Analysis of Textiles (Withdrawn 2024) |
ASTM D 2402 : 2007 : R2018 | Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure) |
ASTM D 6241 : 2014 | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM F 2774 : 2009 : R2020 | Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material |
ASTM D 4114 : 2021 | Standard Performance Specification for Woven Flat Lining Fabrics for Women's and Girls' Apparel |
ASTM D 2252 : 2018 | Standard Specification for Fineness of Types of Alpaca |
ASTM E 3025 : 2016 | Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles |
ASTM E 1458 : 2012 : R2016 | Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles |
ASTM D 6320/D6320M : 2010 : R2014 | Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel (Withdrawn 2023) |
ASTM D 1423/D1423M : 2016 | Standard Test Method for Twist in Yarns by Direct-Counting |
ASTM F 2731 : 2018 | Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems |
ASTM D 2260 : 2003 : R2018 | Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems |
ASTM D 3785 : 2020 | Standard Performance Specification for Woven Necktie and Scarf Fabrics |
ASTM E 2061 : 2020 | Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
ASTM D 4465 : 2005 : R2015 | Standard Performance Specification for Zippers for Dungarees, Jeans and Work Trousers |
ASTM D 6797 : 2015 | Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test (Withdrawn 2024) |
ASTM D 4522 : 2014 | Standard Performance Specification for Feather and Down Fillings for Textile Products (Withdrawn 2023) |
ASTM F 1506 : 2020 : REV A | Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs |
ASTM D 1907/D1907M : 2012 : R2018 | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
ASTM D 7722 : 2017 | Standard Terminology Relating to Industrial Textile Stitches and Seams |
ASTM D 1909 : 2013 : R2020 : EDT 1 | Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers |
ASTM D 4772 : 2014 : R2019 | Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow) |
ASTM F 2675/F2675M : 2019 | Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection |
ASTM D 5141 : 2011 : R2018 | Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device |
ASTM D 6613 : 2008 : R2019 | Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric |
ASTM D 2644 : 2012 : R2018 | Standard Tolerances for Yarns Spun on the Woolen System |
ASTM E 2225 : 2019 : REV A | Standard Guide for Forensic Examination of Fabrics and Cordage |
ASTM D 6496/D6496M : 2020 | Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners |
ASTM D 4154 : 2014 | Standard Performance Specification for Men’s and Boys’ Knitted and Woven Beachwear and Sports Shirt Fabrics |
ASTM D 4156 : 2014 | Standard Performance Specification for Women’s and Girls’ Knitted Sportswear Fabrics (Withdrawn 2023) |
ASTM D 3136 : 2014 : EDT 1 | Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products (Withdrawn 2023) |
ASTM D 3511/D3511M : 2016 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester |
ASTM E 1732 : 2019 : EDT 1 | Standard Terminology Relating to Forensic Science |
ASTM D 4910/D4910M : 2019 | Standard Tables of Body Measurements for Children, Infant Sizes – Preemie to 24 Months |
ASTM D 6461/D6461M : 2018 | Standard Specifications for Silt Fence Materials |
ASTM F 1648 : 1995 : R2013 | Standard Test Methods for Archery Bowstring Component—Serving String Material (Withdrawn 2022) |
ASTM D 2475 : 2001 : R2013 | Standard Specification for Felt (Withdrawn 2022) |
ASTM D 4769 : 2012 : R2018 : EDT 1 | Standard Specification for Woven and Warp Knitted Comforter Fabrics |
ASTM D 6140 : 2000 : R2014 | Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications |
ASTM D 1576 : 2013 | Standard Test Method for Moisture in Wool by Oven-Drying (Withdrawn 2022) |
ASTM D 3514/D3514M : 2016 : R2020 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad |
ASTM D 2692/D2692M : 2015 | Standard Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns (Withdrawn 2024) |
ASTM D 1442 : 2006 : R2019 | Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures) |
ASTM D 1918/D1918M : 1995 : R2017 | Standard Test Method for Asbestos Content of Asbestos Textiles (Withdrawn 2022) |
ASTM D 4885 : 2001 : R2018 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
ASTM D 1574 : 2004 : R2013 | Standard Test Method for Extractable Matter in Wool and Other Animal Fibers (Withdrawn 2022) |
ASTM D 7138 : 2016 | Standard Test Method to Determine Melting Temperature of Synthetic Fibers |
ASTM D 2258/D2258M : 2016 | Standard Practice for Sampling Yarn for Testing |
ASTM D 3886 : 1999 : R2015 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus) |
ASTM D 1573/D1573M : 1995 : R2017 | Standard Test Method for Heat Aging of Asbestos Textiles (Withdrawn 2022) |
ASTM D 7983 : 2017 | Standard Test Method for Shrinkage of Carpet Backing Fabrics |
ASTM D 4119 : 2014 | Standard Performance Specification for Men’s and Boys’ Knitted Dress Shirt Fabrics |
ASTM D 204 : 2002 : R2016 | Standard Test Methods for Sewing Threads |
ASTM D 6566 : 2018 | Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats |
ASTM D 7017 : 2020 | Standard Performance Specification for Water-Resistant Rainwear and All-Purpose, Water-Repellent Coat Fabrics |
ASTM F 1959/F1959M : 2014 : EDT 1 | Standard Test Method for Determining the Arc Rating of Materials for Clothing |
ASTM D 584 : 2010 : R2018 | Standard Test Method for Wool Content of Raw Wool—Laboratory Scale |
ASTM D 2731 : 2015 | Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) |
ASTM F 3050 : 2017 | Standard Guide for Conformity Assessment of Personal Protective Clothing and Equipment |
ASTM F 2700 : 2008 : R2020 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Continuous Heating |
ASTM F 1955 : 2020 | Standard Test Method for Flammability of Sleeping Bags |
ASTM D 5726 : 1998 : R2020 | Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
ASTM D 5647 : 2007 : R2018 | Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus |
ASTM D 7021 : 2014 | Standard Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics (Withdrawn 2023) |
ASTM D 4720 : 2008 : R2019 | Standard Performance Specification for Soft Window Covering Fabrics for Household Use |
ASTM D 5362 : 2013 : R2018 | Standard Test Method for Snagging Resistance of Fabrics (Bean Bag) |
ASTM D 6859 : 2018 | Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings |
ASTM D 1061/D1061M : 1995 : R2017 | Standard Specification for Asbestos Lap (Withdrawn 2022) |
ASTM D 2497 : 2007 : R2018 | Standard Tolerances for Manufactured Organic-Base Filament Single Yarns |
ASTM D 737 : 2018 | Standard Test Method for Air Permeability of Textile Fabrics |
ASTM D 6587 : 2012 : R2018 | Standard Test Method for Yarn Number Using Automatic Tester |
ASTM D 3938 : 2018 | Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products |
ASTM D 2653 : 2007 : R2018 | Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) |
ASTM D 5219 : 2015 | Standard Terminology Relating to Body Dimensions for Apparel Sizing (Withdrawn 2024) |
ASTM D 3786/D3786M : 2018 | Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method |
ASTM D 2495 : 2007 : R2019 | Standard Test Method for Moisture in Cotton by Oven-Drying |
ASTM F 1414 : 2019 | Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing |
ASTM D 1244 : 1998 : R2020 | Standard Practice for Designation of Yarn Construction |
ASTM D 8102 : 2017 | Standard Practice for Manufacturing Quality Control of Geotextiles |
ASTM D 3936 : 2021 | Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering |
ASTM D 6197 : 1999 : R2017 | Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests |
ASTM D 5430 : 2013 : R2017 | Standard Test Methods for Visually Inspecting and Grading Fabrics |
ASTM D 2591 : 2007 : R2020 | Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens) |
ASTM D 1447 : 2007 : R2021 | Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement |
ASTM D 2968 : 2013 | Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection (Withdrawn 2022) |
ASTM D 7241 : 2013 | Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering (Withdrawn 2022) |
ASTM D 2645 : 2007 : R2018 | Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems |
ASTM D 5278/D5278M : 2009 : R2017 | Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing) |
ASTM F 2703 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction |
ASTM D 4920 : 2013 | Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties (Withdrawn 2022) |
ASTM D 3776/D3776M : 2020 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
ASTM D 5169 : 1998 : R2015 | Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
ASTM D 3562 : 2014 | Standard Performance Specification for Woven Drycleanable Coat Fabrics |
ASTM D 6637/D6637M : 2015 | Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method |
ASTM D 6663 : 2008 : R2019 | Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use |
ASTM D 5252 : 2020 | Standard Practice for the Operation of the Hexapod Tumble Drum Tester |
ASTM D 3787 : 2016 : R2020 | Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test |
ASTM D 6413/D6413M : 2015 | Standard Test Method for Flame Resistance of Textiles (Vertical Test) |
ASTM D 1871 : 2004 : R2014 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) |
ASTM D 3108/D3108M : 2013 : R2020 | Standard Test Method for Coefficient of Friction, Yarn to Solid Material |
ASTM D 3878 : 2020 : REV B | Standard Terminology for Composite Materials |
ASTM E 2224 : 2019 | Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy |
ASTM D 2612 : 1999 : R2018 | Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests) |
ASTM D 4594/D4594M : 1996 : R2020 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
ASTM D 6799 : 2013 : R2019 | Standard Terminology Relating to Inflatable Restraints |
ASTM D 5426 : 2019 | Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints |
ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
ASTM F 2302 : 2020 | Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame |
ASTM D 579/D579M : 2015 | Standard Specification for Greige Woven Glass Fabrics |
ASTM D 315/D315M : 1995 : R2017 | Standard Specification for Woven Asbestos Tape (Withdrawn 2022) |
ASTM D 4466 : 2002 : R2018 | Standard Terminology Related to Multicomponent Textile Fibers |
ASTM E 1474 : 2020 : REV A | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
ASTM D 3937 : 2012 : R2018 | Standard Test Method for Crimp Frequency of Manufactured Staple Fibers |
ASTM D 2052 : 2005 : R2015 | Standard Test Method for Colorfastness of Zippers to Drycleaning |
ASTM D 5253 : 2004 : R2016 | Standard Terminology Relating to Floor Coverings and Textile Upholstered Furniture |
ASTM D 6337 : 1998 : R2019 | Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics |
ASTM D 4037 : 2002 : R2019 | Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics |
ASTM E 1537 : 2016 | Standard Test Method for Fire Testing of Upholstered Furniture |
ASTM D 4354 : 2012 : R2020 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing |
ASTM D 3774 : 2018 | Standard Test Method for Width of Textile Fabric |
ASTM D 7267 : 2019 : REV A | Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering |
ASTM D 5344 : 1999 : R2017 | Standard Test Method for Extension Force of Partially Oriented Yarn |
ASTM D 2257 : 2020 | Standard Test Method for Extractable Matter in Textiles |
ASTM D 7499/D7499M : 2009 : R2014 | Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness |
ASTM D 4845 : 2010 : R2018 | Standard Terminology Relating to Wool |
ASTM D 6524/D6524M : 2016 | Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) |
ASTM D 3657 : 2003 : R2014 | Standard Specification for Zipper Dimensions |
ASTM D 6960/D6960M : 2016 : EDT 1 | Standard Tables for Body Measurements for Plus Women's Figure Type, Size Range 14W – 40W |
ASTM D 7139 : 2020 | Standard Terminology for Cotton Fibers |
ASTM D 3513 : 2002 : R2018 | Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber |
ASTM F 1060 : 2018 | Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR) |
ASTM D 299/D299M : 2004 : R2017 | Standard Specification for Asbestos Yarns (Withdrawn 2022) |
ASTM D 6554/D6554M : 2014 | Standard Specification for 100 % Cotton Denim Fabrics (Withdrawn 2023) |
ASTM D 76/D76M : 2011 : R2016 | Standard Specification for Tensile Testing Machines for Textiles |
ASTM D 3512/D3512M : 2016 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
ASTM D 5687/D5687M : 2020 | Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
ASTM D 4595 : 2017 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
ASTM D 628/D628M : 1995 : R2017 | Standard Specification for Asbestos Tubular Sleeving (Withdrawn 2022) |
ASTM D 4116 : 2020 | Standard Performance Specification for Women's and Girls' Knitted and Woven Corset-Girdle-Combination Fabrics |
ASTM D 3823 : 2007 : R2018 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
ASTM D 375/D375M : 1995 : R2017 | Standard Specification for Asbestos Roving (Withdrawn 2022) |
ASTM D 3883 : 2004 : R2020 | Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics |
ASTM F 2757 : 2020 | Standard Guide for Home Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing |
ASTM D 7016/D7016M : 2020 | Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame |
ASTM D 3107 : 2007 : R2019 | Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns |
ASTM D 2646 : 2018 | Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings |
ASTM D 2524 : 2013 | Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method—<fraction> <num>1</num><den>8</den></fraction>-in. (3.2-mm) Gage Length (Withdrawn 2022) |
ASTM D 4153 : 2014 | Standard Performance Specification for Men’s, Women’s, and Children’s Woven Handkerchief Fabrics |
ASTM E 2280 : 2017 | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
ASTM D 3181 : 2015 : R2019 | Standard Guide for Conducting Wear Tests on Textiles |
ASTM D 4491/D4491M : 2020 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 3655 : 2014 | Standard Performance Specification for Men’s and Women’s Sliver Knitted Overcoat and Jacket Fabrics |
ASTM D 4886 : 2018 | Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method) |
ASTM D 5684 : 2019 : REV A | Standard Terminology Relating to Pile Floor Coverings |
ASTM D 5446 : 2008 : R2019 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
ASTM D 7197/D7197M : 2021 | Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22) |
ASTM D 5665/D5665M : 1999 : REV A : R2014 : EDT 1 | Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing |
ASTM D 1335 : 2021 | Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings |
ASTM D 4158 : 2008 : R2020 | Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion) |
ASTM D 7888 : 2018 | Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings |
ASTM D 2970/D2970M : 2004 : R2014 | Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments (Withdrawn 2023) |
ASTM D 1776/D1776M : 2020 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 8054/D8054M : 2016 | Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns |
ASTM D 1464 : 2012 : R2019 | Standard Practice for Differential Dyeing Behavior of Cotton |
ASTM D 4776/D4776M : 2018 | Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure |
ASTM D 6707/D6707M : 2006 : R2019 | Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications |
ASTM D 6768/D6768M : 2020 | Standard Test Method for Tensile Strength of Geosynthetic Clay Liners |
ASTM D 1445/D1445M : 2012 : R2021 | Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method) |
ASTM D 6388 : 2018 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
ASTM D 1440 : 2007 : R2019 | Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method) |
ASTM D 7508/D7508M : 2020 | Standard Specification for Polyolefin Chopped Strands for Use in Concrete |
ASTM D 3822/D3822M : 2014 : R2020 | Standard Test Method for Tensile Properties of Single Textile Fibers |
ASTM D 5432 : 2012 : R2019 | Standard Performance Specification for Blanket Products for Institutional and Household Use |
ASTM D 3656/D3656M : 2013 | Standard Specification for Insect Screening and Louver Cloth Woven from<brk/>Vinyl-Coated Glass Yarns |
ASTM F 2130 : 2011 : R2018 | Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials (Withdrawn 2023) |
ASTM D 4355/D4355M : 2014 : R2018 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus |
ASTM D 8077/D8077M : 2016 | Standard Tables for Body Measurements for Mature Big Men Type, Size Range 46–64 |
ASTM E 1740 : 2020 : REV A | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
ASTM D 2261 : 2013 : R2017 : EDT 1 | Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) |
ASTM F 1939 : 2015 : R2020 | Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating |
ASTM D 5322 : 2017 | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
ASTM C 475/C475M : 2017 | Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
ASTM D 2100/D2100M : 1995 : R2017 | Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes (Withdrawn 2022) |
ASTM D 4524 : 2020 | Standard Test Method for Composition of Plumage |
ASTM D 5103 : 2007 : R2018 | Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test) |
ASTM F 1494 : 2014 | Standard Terminology Relating to Protective Clothing |
ASTM D 1577 : 2007 : R2018 | Standard Test Methods for Linear Density of Textile Fibers |
ASTM D 4031 : 2007 : R2018 | Standard Test Method for Bulk Properties of Textured Yarns |
ASTM D 1683/D1683M : 2017 : R2018 | Standard Test Method for Failure in Sewn Seams of Woven Fabrics |
ASTM D 7142 : 2005 : R2016 | Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners |
ASTM D 6545 : 2018 | Standard Test Method for Flammability of Textiles Used in Children's Sleepwear |
ASTM D 4846 : 1996 : R2016 | Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
ASTM D 6479 : 2015 : R2020 | Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints |
ASTM F 3324 : 2019 | Standard Test Method for Measurement of Cut Resistance to Chainsaw in Leg-Protective Devices |
ASTM D 3939/D3939M : 2013 : R2017 | Standard Test Method for Snagging Resistance of Fabrics (Mace) |
ASTM D 3995 : 2014 | Standard Performance Specification for Men’s and Women’s Knitted Career Apparel Fabrics: Dress and Vocational |
ASTM D 7023 : 2006 : R2018 | Standard Terminology Relating to Home Furnishings |
ASTM D 7812 : 2016 | Standard Test Method for Tensile Testing of Aramid Paper |
ASTM D 6840 : 2002 : R2013 | Standard Test Method for Effect of Drycleaning on Buttons |
ASTM D 4029/D4029M : 2016 | Standard Specification for Finished Woven Glass Fabrics |
ASTM D 2969 : 2004 : R2014 | Standard Test Methods for Steel Tire Cords (Withdrawn 2023) |
ASTM D 8089 : 2017 | Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives |
ASTM D 2255/D2255M : 2009 : R2020 | Standard Test Method for Grading Spun Yarns for Appearance |
ASTM D 6567 : 2018 | Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP) |
ASTM D 6830 : 2002 : R2016 | Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media |
ASTM D 2061 : 2007 : R2013 | Standard Test Methods for Strength Tests for Zippers |
ASTM D 4912/D4912M : 2014 | Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth (Withdrawn 2023) |
ASTM D 5848 : 2020 | Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings |
ASTM D 5993 : 2018 | Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.