ASTM D 1045 : 2019
Current
The latest, up-to-date edition.
Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
Hardcopy , PDF
English
01-08-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 20
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover sampling and testing of liquid plasticizers used in compounding of plastics. Acid number, ester content, specific gravity, color, refractive index, and water content are determined.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards information is given in Section 5.
Note 1:There is no known ISO equivalent to this standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1992 : 2017 | Standard Guide for Testing Synthetic Plasticizers Used in Rubber |
| ASTM F 942 : 2018 | Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
| ASTM D 70 : 2018 | Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
| ASTM D 3465 : 2021 | Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 3465 : 2014 | Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM D 1218 : 2021 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM D 1544 : 2004 : R2018 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
| ASTM D 70 : 2009 : EDT 1 | Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method) |
| ASTM D 287 : 2022 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method) |
| ASTM E 2251 : 2014 : R2021 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM E 203 : 2023 | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM E 2251 : 2014 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM D 5386 : 2024 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 287 : 2012 : REV B | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
| ASTM D 1600 : 2018 | Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) |
| ASTM D 1544 : 2004 : R2023 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
| ASTM D 1218 : 1999 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 1218 : 2012 : R2016 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| ASTM E 1 : 2014 : R2020 | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM D 5386 : 2016 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 4052 : 2022 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 70 : 2018 : REV A | Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
| ASTM E 203 : 2024 | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM E 203 : 2016 | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM D 287 : 2012 : REV B : R2019 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.