ASTM C 876 : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
08-10-2022
English
20-04-2016
CONTAINED IN VOL. 03.02, 2016 Describes the estimation of the electrical corrosion potential of uncoated reinforcing steel in field and laboratory concrete, for the purpose of determining the corrosion activity of the reinforcing steel.
Committee |
G 01
|
DocumentType |
Redline
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This test method covers the estimation of the electrical corrosion potential of uncoated reinforcing steel in field and laboratory concrete, for the purpose of determining the corrosion activity of the reinforcing steel.
1.2This test method is limited by electrical circuitry. Concrete surface in building interiors and desert environments lose sufficient moisture so that the concrete resistivity becomes so high that special testing techniques not covered in this test method may be required (see 5.1.4.1). Concrete surfaces that are coated or treated with sealers may not provide an acceptable electrical circuit. The basic configuration of the electrical circuit is shown in Fig. 1.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
NACE SP 02 90 : 2007 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
NACE SP 02 16 : 2016 | SACRIFICIAL CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
BS EN ISO 12696:2016 | Cathodic protection of steel in concrete |
BS 1881-201:1986 | Testing concrete Guide to the use of non-destructive methods of test for hardened concrete |
ASTM G 215 : 2017 : REDLINE | Standard Guide for Electrode Potential Measurement |
NACE SP 01 07 : 2017 | ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION FOR REINFORCED CONCRETE |
NACE SP 03 90 : 2009 | MAINTENANCE AND REHABILITATION CONSIDERATIONS FOR CORROSION CONTROL OF ATMOSPHERICALLY EXPOSED EXISTING STEEL-REINFORCED CONCRETE STRUCTURES |
EN ISO 12696:2016 | Cathodic protection of steel in concrete (ISO 12696:2016) |
CSA S413 : 2014 | PARKING STRUCTURES |
ACI 546.1R : 80(R1997) | GUIDE FOR REPAIR OF CONCRETE BRIDGE SUPERSTRUCTURES |
CSA S448.1 : 2010 : R2015 | REPAIR OF REINFORCED CONCRETE IN BUILDINGS AND PARKING STRUCTURES |
CSA S448.1 : 2010 | REPAIR OF REINFORCED CONCRETE IN BUILDINGS AND PARKING STRUCTURES |
ACI 548.5R : 2016 | GUIDE FOR POLYMER CONCRETE OVERLAYS |
ACI 349.3R : 2018 | REPORT ON EVALUATION AND REPAIR OF EXISTING NUCLEAR SAFETY-RELATED CONCRETE STRUCTURES |
ASCE 30 00 : 2000 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
UNE 83992-2:2012 EX | Durability of concrete. Test methods. Chloride penetration tests on concrete. Part 2: Integral accelerated method. |
ACI 365.1R : 2017 | REPORT ON SERVICE LIFE PREDICTION |
ASTM G 109 : 2007 : R2013 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
NACE RP 02 90 : 0 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
NACE SP 03 08 : 2008(R2018) | INSPECTION METHODS FOR CORROSION EVALUATION OF CONVENTIONALLY REINFORCED CONCRETE STRUCTURES |
ACI 224.1R : 2007 | CAUSES, EVALUATION, AND REPAIR OF CRACKS IN CONCRETE STRUCTURES |
UNE 112083:2010 | Measurement of free corrosion potential on steel reinforced concrete structures |
UNE-EN ISO 12696:2017 | Cathodic protection of steel in concrete (ISO 12696:2016) |
NACE 11100 : 2000(R2018) | USE OF REFERENCE ELECTRODES FOR ATMOSPHERICALLY EXPOSED REINFORCED CONCRETE STRUCTURES |
NACE 01110 : 0 | STRAY-CURRENT-INDUCED CORROSION IN REINFORCED AND PRESTRESSED CONCRETE STRUCTURES |
ACI 364.1R : 2007 | GUIDE FOR EVALUATION OF CONCRETE STRUCTURES PRIOR TO REHABILITATION |
ACI 222R : 2001 | PROTECTION OF METALS IN CONCRETE AGAINST CORROSION |
ASCE/SEI 30 14 : 2014 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
NACE 05107 : 0 | REPORT ON CORROSION PROBES IN SOIL OR CONCRETE |
ASTM G 109 : 2007 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
ISO 12696:2016 | Cathodic protection of steel in concrete |
ACI MNL 3 : 0 | GUIDE TO THE CODE FOR ASSESSMENT, REPAIR, AND REHABILITATION OF EXISTING CONCRETE STRUCTURES |
NACE RP 03 90 : 2006 | MAINTENANCE AND REHABILITATION CONSIDERATIONS FOR CORROSION CONTROL OF ATMOSPHERICALLY EXPOSED EXISTING STEEL-REINFORCED CONCRETE STRUCTURES |
UFC 4-150-07 : Change 1 | UNIFIED FACILITIES CRITERIA - MAINTENANCE AND OPERATION: MAINTENANCE OF WATERFRONT FACILITIES |
ACI 362R : 1985 | STATE-OF-THE-ART REPORT ON PARKING STRUCTURES |
DIN EN ISO 12696:2016-07 (Draft) | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
I.S. EN ISO 12696:2016 | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
ACI 437R : 2003 | STRENGTH EVALUATION OF EXISTING CONCRETE BUILDINGS |
ASTM G 3 : 2014 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.