ASTM C 670 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
Available format(s)
PDF
Superseded date
09-03-2024
Superseded by
Language(s)
English
Published date
07-09-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.02, 2015 Gives guidance for preparing precision and bias statements that comply with these requirements.
| Committee |
C 09
|
| DocumentType |
Redline
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1The Form and Style for ASTM Standards requires that all test methods contain statements on precision and bias. Further, the precision statement is required to contain a statement on single-operator precision (repeatability) and a statement on multilaboratory precision (reproducibility). This practice provides guidance for preparing precision and bias statements that comply with these requirements. Discussion of the purpose and significance of precision and bias statements for users of test methods is also provided. Examples of precision statements that conform to this practice are included in Appendix X1. This practice supplements Practice E177 and has been developed to meet the needs of ASTM Committees dealing with construction materials.
Note 1:Although this practice is under the jurisdiction of Committee C09, the current version was developed jointly by Committees C01 and C09 and has subsequently been adopted for use by other committees dealing with construction materials.
1.2This practice assumes that an interlaboratory study (ILS) has been completed in accordance with Practice C802 or Practice E691. The interlaboratory study provides the necessary statistical values to write the precision and bias statements.
1.3The system of units for this practice is not specified. Dimensional quantities in the practice are presented only in examples of precision and bias statements.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| AASHTO T 196M/T 196 : 1900 | METHOD OF TEST FOR AIR CONTENT OF FRESHLY MIXED CONCRETE BY THE VOLUMETRIC METHOD |
| ASTM D 3205 : 1986 : R1991 | Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer (Withdrawn 2000) |
| AASHTO T 185 : 2011 | METHOD OF TEST FOR EARLY STIFFENING OF HYDRAULIC CEMENT (MORTAR METHOD) |
| ASTM D 2950/D2950M : 2014 : REDLINE | Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods |
| AASHTO T 336 : 2015(R2019) | METHOD OF TEST FOR COEFFICIENT OF THERMAL EXPANSION OF HYDRAULIC CEMENT CONCRETE |
| ASTM D 994 : 1998 : R2003 | Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
| AASHTO TP 95 : 2014 | METHOD OF TEST FOR SURFACE RESISTIVITY INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE ION PENETRATION |
| API 10 : 1990 | SPECIFICATION FOR MATERIALS AND TESTING FOR WELL CEMENTS |
| ASTM C 1603 : 2016 : REDLINE | Standard Test Method for Measurement of Solids in Water |
| ASTM C 136/C136M : 2014 : REDLINE | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM D 632 : 2012 | Standard Specification for Sodium Chloride |
| ASTM D 994 : 1998 : R2010 | Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
| AASHTO T 166 : 2013 | METHOD OF TEST FOR BULK SPECIFIC GRAVITY (G[MB]) OF COMPACTED ASPHALT MIXTURES USING SATURATED SURFACE-DRY SPECIMENS |
| ASTM D 5581 : 2007 : REV A : EDT 1 | Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
| ASTM C 1090/C1090M : 2015 : REDLINE | Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout |
| AASHTO TP 81 : 2012 : R2015 | METHOD OF TEST FOR DETERMINING AGGREGATE SHAPE PROPERTIES BY MEANS OF DIGITAL IMAGE ANALYSIS |
| AASHTO M 33 : 1999 : R2012 | SPECIFICATION FOR PREFORMED EXPANSION JOINT FILLER FOR CONCRETE (BITUMINOUS TYPE) |
| AASHTO T 98M/T 98 : 2012(R2016) | METHOD OF TEST FOR FINENESS OF PORTLAND CEMENT BY THE TURBIDIMETER |
| ASTM C 827 : 2001 : REV A | Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
| CSA A3000 : 2013 | CEMENTITIOUS MATERIALS COMPENDIUM |
| AASHTO T 24M/T 24 : 1900 | METHOD OF TEST FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE |
| ASTM D 1557 : 2012 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 7113/D7113M : 2010 | Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods |
| ASTM E 2916 : 2013 | Standard Terminology for Digital and Multimedia Evidence Examination |
| AASHTO T 48 : 2006 : R2010 | METHOD OF TEST FOR FLASH AND FIRE POINTS BY CLEVELAND OPEN CUP |
| ASTM D 6607 : 2000 | Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| ASTM C 1252 : 2017 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
| ASTM C 1708/C1708M : 2016 : REDLINE | Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements |
| ASTM C 823/C823M : 2012 | Standard Practice for Examination and Sampling of Hardened<brk> Concrete in Constructions |
| ASTM C 1556 : 2011 : REV A | Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM C 512/C512M : 2015 : REDLINE | Standard Test Method for Creep of Concrete in Compression |
| ASTM D 7552 : 2009 | Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer |
| ASTM C 1427 : 2016 : REDLINE | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 497 : 2018-02 | TEST METHODS FOR CONCRETE PIPE, MANHOLE SECTIONS, OR TILE |
| ASTM C 1556 : 2011 | Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
| ASTM C 1064/C1064M : 2017 : REDLINE | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
| ASTM C 827 : 2001 | Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
| ASTM D 7175 : 2015 : REDLINE | Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM C 1579 : 2013 : REDLINE | Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) |
| ASTM D 4125/D4125M : 2010 | Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
| ASTM C 593 : 2006 | Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization |
| ASTM C 1356 : 2007 : R2012 | Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure |
| ASTM C 918/C918M : 2013 : REDLINE | Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |
| ASTM D 994 : 1998 | Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
| ASTM C 805 : 2002 | Standard Test Method for Rebound Number of Hardened Concrete |
| ASTM C 535 : 2016 : REDLINE | Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM D 2042 : 2015 : REDLINE | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
| ASTM C 1067 : 2012 : REDLINE | Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials |
| ASTM D 7405 : 2015 : REDLINE | Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM C 1240 : 2015 : REDLINE | Standard Specification for Silica Fume Used in Cementitious Mixtures |
| ASTM C 186 : 2017 : REDLINE | Standard Test Method for Heat of Hydration of Hydraulic Cement |
| ASTM C 1152/C1152M : 2004 : R2012 : EDT 1 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM D 6816:2011 | Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders |
| ASTM C 1138 : 1997 | Standard Test Method for Abrasion Resistance of Concrete (Underwater Method) |
| ASTM D 6607 : 2000 : R2009 | Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| ASTM D 6928 : 2017 : REDLINE | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
| ASTM C 1792 : 2014 | Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023) |
| ASTM C 70 : 2013 : REDLINE | Standard Test Method for Surface Moisture in Fine Aggregate |
| ASTM D 5444 : 2015 : REDLINE | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
| ASTM C 302 : 2013 : R2017 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
| ASTM D 7552 : 2009 : R2014 | Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer |
| ASTM C 457/C457M : 2016 : REDLINE | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
| AASHTO T 30 : 2015 | METHOD OF TEST FOR MECHANICAL ANALYSIS OF EXTRACTED AGGREGATE |
| ASTM D 994/D994M : 2011 | Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
| ASTM C 512 : 2002 | Standard Test Method for Creep of Concrete in Compression |
| AASHTO TP 119 : 2015(R2017) | METHOD OF TEST FOR ELECTRICAL RESISTIVITY OF A CONCRETE CYLINDER TESTED IN A UNIAXIAL RESISTANCE TEST |
| ASTM D 6607 : 2000 : R2005 | Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| ASTM D 2419 : 2014 : REDLINE | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM C 496/C496M : 2017 : REDLINE | Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens |
| ASTM C 827 : 2001 : REV A : R2005 | Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
| ASTM C 1365 : 2006 : R2011 | Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis |
| AASHTO TP 110 : 2014 | METHOD OF TEST FOR POTENTIAL ALKALI REACTIVITY OF AGGREGATES AND EFFECTIVENESS OF ASR MITIGATION MEASURES (MINIATURE CONCRETE PRISM TEST, MCPT) |
| ASTM A 849 : 2015 : REDLINE | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
| ASTM D 3633 : 1998 | Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems |
| ASTM C 403/C403M : 2016 : REDLINE | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
| ASTM D 1075 : 2011 : REDLINE | TEST METHOD FOR EFFECT OF WATER ON COMPRESSIVE STRENGTH OF COMPACTED BITUMINOUS MIXTURES |
| AASHTO PP 74 : 2013 | PRACTICE FOR DETERMINATION OF SIZE AND ROUNDNESS OF GLASS BEADS USED IN TRAFFIC MARKINGS BY MEANS OF COMPUTERIZED OPTICAL METHOD |
| AASHTO T 308 : 2010 : R2015 | METHOD OF TEST FOR DETERMINING THE ASPHALT BINDER CONTENT OF HOT MIX ASPHALT (HMA) BY THE IGNITION METHOD |
| AASHTO T 197M/T 197 : 1900 | METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE |
| AASHTO T 158 : 2011(R2019) | METHOD OF TEST FOR BLEEDING OF CONCRETE |
| ASTM C 1150 : 1996 | Standard Test Method for the Break-Off Number of Concrete (Withdrawn 2002) |
| AASHTO T 318 : 2015(R2019) | METHOD OF TEST FOR WATER CONTENT OF FRESHLY MIXED CONCRETE USING MICROWAVE OVEN DRYING |
| AASHTO T 158 : 2011 : R2015 | METHOD OF TEST FOR BLEEDING OF CONCRETE |
| AASHTO T 132 : 1987(R2018) | METHOD OF TEST FOR TENSILE STRENGTH OF HYDRAULIC CEMENT MORTARS |
| ASTM C 566 : 2013 : REDLINE | TEST METHOD FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
| AASHTO T 316 : 2013 | METHOD OF TEST FOR VISCOSITY DETERMINATION OF ASPHALT BINDER USING ROTATIONAL VISCOMETER |
| AASHTO T 327 : 2012 | METHOD OF TEST FOR RESISTANCE OF COARSE AGGREGATE TO DEGRADATION BY ABRASION IN THE MICRO-DEVAL APPARATUS |
| AASHTO T 245 : 2015 | METHOD OF TEST FOR RESISTANCE TO PLASTIC FLOW OF ASPHALT MIXTURES USING MARSHALL APPARATUS |
| AASHTO T 315 : 2012 | METHOD OF TEST FOR DETERMINING THE RHEOLOGICAL PROPERTIES OF ASPHALT BINDER USING A DYNAMIC SHEAR RHEOMETER (DSR) |
| AASHTO T 84 : 2013 | METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF FINE AGGREGATE |
| AASHTO TP 92 : 2014 | METHOD OF TEST FOR DETERMINING THE CRACKING TEMPERATURE OF ASPHALT BINDER USING THE ASPHALT BINDER CRACKING DEVICE (ABCD) |
| AASHTO T 295 : 2013 | METHOD OF TEST FOR SPECIFIC GRAVITY OR API GRAVITY OF LIQUID ASPHALTS BY HYDROMETER METHOD |
| AASHTO T 308 : 2010 | METHOD OF TEST FOR DETERMINING THE ASPHALT BINDER CONTENT OF HOT MIX ASPHALT (HMA) BY THE IGNITION METHOD |
| ASTM C 1747/C1747M : 2013 : REDLINE | Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion |
| ASTM D 5779/D5779M : 2014 : REDLINE | Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control (Withdrawn 2023) |
| ASTM C 1524 :2002 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 1883 : 2016 : REDLINE | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 5143 : 2006 | Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography |
| ASTM C 1137 : 2005 | Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011) |
| ASTM C 117 : 2017 : REDLINE | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
| ASTM C 302 : 2013 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
| ASTM C 1105 : 2008 : REV A : R2016 | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM C 1524 : 2002 : REV A | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM D 427 : 2004 | Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008) |
| ASTM C 827/C827M : 2016 : REDLINE | Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
| ASTM C 823 : 2000 | Standard Practice for Examination and Sampling of Hardened Concrete in Constructions |
| ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
| ASTM C 78/C78M : 2018 : REDLINE | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
| ASTM D 5581 : 2007 | Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
| ASTM C 42/C 42M : 2016-10 | TEST METHOD FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE |
| ASTM C 873/C873M : 2015 : REDLINE | Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
| ASTM D 3289 : 2017 : REDLINE | Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method) |
| ASTM D 994/D994M : 2011 : R2016 | Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
| ASTM C 1608 : 2017 : REDLINE | Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste |
| ASTM D 5249 : 2010 : R2016 | Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
| TP 127 : 2017 | METHOD OF TEST FOR DETERMINING THE FRACTURE ENERGY DENSITY OF ASPHALT BINDER USING THE BINDER FRACTURE ENERGY (BFE) TEST |
| ASTM C 1079 : 1987 : R1992 : EDT 1 | Test Methods for Determining the Water Content of Freshly Mixed Concrete (Withdrawn 1998) |
| AASHTO T 164 : 2014(R2018) | Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) |
| AASHTO T 358 : 2015 | METHOD OF TEST FOR SURFACE RESISTIVITY INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE ION PENETRATION |
| ASTM C 495/C495M : 2012 : REDLINE | Standard Test Method for Compressive Strength of Lightweight Insulating Concrete |
| ASTM D 7428 : 2015 : REDLINE | Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
| ASTM D 3142 : 2005 | Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method |
| ASTM C 1604/C1604M : 2005 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ASTM D 3155 : 2011 : REDLINE | Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures |
| ASTM D 2172/D2172M : 2017-04 | TEST METHODS FOR QUANTITATIVE EXTRACTION OF BITUMEN FROM BITUMINOUS PAVING MIXTURES |
| ASTM D 5249 : 2010 | Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
| ASTM C 1604/C1604M : 2005 : R2012 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| AASHTO T 240 : 2013 | METHOD OF TEST FOR EFFECT OF HEAT AND AIR ON A MOVING FILM OF ASPHALT BINDER (ROLLING THIN-FILM OVEN TEST) |
| ASTM D 4125/D4125M : 2010 : R2016 | Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
| AASHTO T 198 : 2015(R2019) | Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens<br> |
| AASHTO R 59 : 2011 : R2015 | PRACTICE FOR RECOVERY OF ASPHALT BINDER FROM SOLUTION BY ABSON METHOD |
| AASHTO T 48 : 2006 : R2015 | METHOD OF TEST FOR FLASH AND FIRE POINTS BY CLEVELAND OPEN CUP |
| ASTM D 1074 : 2017 : REDLINE | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| ACI ITG-8R : 2010 | REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE |
| AASHTO T 71 : 2008 : R2012 | METHOD OF TEST FOR EFFECT OF ORGANIC IMPURITIES IN FINE AGGREGATE ON STRENGTH OF MORTAR |
| AASHTO T 209 : 2012 | METHOD OF TEST FOR THEORETICAL MAXIMUM SPECIFIC GRAVITY (G[MM]) AND DENSITY OF HOT MIX ASPHALT (HMA) |
| ASTM D 7370/D7370M : 2014 : REDLINE | Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
| ASTM C 1365 : 2006 | Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis |
| AASHTO T 314 : 2012 | METHOD OF TEST FOR DETERMINING THE FRACTURE PROPERTIES OF ASPHALT BINDER IN DIRECT TENSION (DT) |
| AASHTO T 104 : 1999 | METHOD OF TEST FOR SOUNDNESS OF AGGREGATE BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| AASHTO T 255 : 2000 | METHOD OF TEST FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
| AASHTO T 85 : 2014 | STANDARD METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF COARSE AGGREGATE |
| AASHTO R 59 : 2011 | PRACTICE FOR RECOVERY OF ASPHALT BINDER FROM SOLUTION BY ABSON METHOD |
| AASHTO T 303 : 2000 | METHOD OF TEST FOR ACCELERATED DETECTION OF POTENTIALLY DELETERIOUS EXPANSION OF MORTAR BARS DUE TO ALKALI-SILICA REACTION |
| AASHTO T 265 : 2015 | METHOD OF TEST FOR LABORATORY DETERMINATION OF MOISTURE CONTENT OF SOILS |
| AASHTO T 37 : 2007 : R2011 | METHOD OF TEST FOR SIEVE ANALYSIS OF MINERAL FILLER FOR HOT MIX ASPHALT (HMA) |
| AASHTO T 19M/T 19 : 1900 | METHOD OF TEST FOR BULK DENSITY ('UNIT WEIGHT') AND VOIDS IN AGGREGATE |
| AASHTO T 167 : 2010 : R2015 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HOT MIX ASPHALT |
| AASHTO T 27 : 2014 | METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES |
| ASTM C 87 : 2005 | Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
| ASTM D 6927 : 2015 : REDLINE | Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures |
| ASTM C 823/C823M : 2012 : R2017 | Standard Practice for Examination and Sampling of Hardened<brk/> Concrete in Constructions |
| ASTM C 1260 : 2014 : REDLINE | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
| ASTM D 546 : 2017 : REDLINE | Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
| ASTM C 1105 : 2008 | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM D 5581 : 2007 : REV A : R2013 | Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
| ASTM C 1151 : 1991 | Standard Test Method for Evaluating the Effectiveness of Materials for Curing Concrete (Withdrawn 2000) |
| ASTM D 2939 : 2003 | Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012) |
| ASTM C 666/C666M : 2015 : REDLINE | Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing |
| ASTM C 779/C779M : 2012 : REDLINE | Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces |
| ASTM C 995 : 2001 | Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone (Withdrawn 2008) |
| ASTM C 188 : 2017 : REDLINE | Standard Test Method for Density of Hydraulic Cement |
| ASTM D 3042 : 2017 : REDLINE | Standard Test Method for Insoluble Residue in Carbonate Aggregates |
| ASTM C 1152/C1152M:2004 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM C 1152/C1152M : 2004 : EDT 1 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM D 3142/D3142M : 2017 : REDLINE | Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method |
| ASTM C 873 : 2004 | Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
| ASTM D 2041 : 2003 : REV A | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
| ASTM D 5143 : 2006 : R2015 : EDT 1 | Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023) |
| ASTM D 1856 : 2009 | Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
| AASHTO T 154 : 2015 | METHOD OF TEST FOR TIME OF SETTING OF HYDRAULIC CEMENT PASTE BY GILLMORE NEEDLES |
| AASHTO T 11 : 2005 : R2013 | METHOD OF TEST FOR MATERIALS FINER THAN 75-[MU]M (NO. 200) SIEVE IN MINERAL AGGREGATES BY WASHING |
| ASTM D 6816 : 2011 : R2016 | Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders |
| AASHTO T 119M/T 119 : 1900 | METHOD OF TEST FOR SLUMP OF HYDRAULIC CEMENT CONCRETE |
| ASTM A 1081/A1081M : 2015 : REDLINE | Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand |
| AASHTO T 276 : 2015 | METHOD OF TEST FOR MEASURING EARLY-AGE COMPRESSION STRENGTH AND PROJECTING LATER-AGE STRENGTH |
| AASHTO T 157 : 2012(R2016) | Standard Method of Test for Air-Entraining Admixtures for Concrete<br> |
| ASTM C 928/C928M : 2013 : REDLINE | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ASTM C 115 : 2010 | Standard Test Method for Fineness of Portland Cement by the Turbidimeter |
| ASTM C 1218/C1218M : 2017 : REDLINE | Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
| AASHTO T 106M/T 106 : 1900 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR (USING 50-MM OR 2-IN. CUBE SPECIMENS) |
| AASHTO TP 81 : 2012 | METHOD OF TEST FOR DETERMINING AGGREGATE SHAPE PROPERTIES BY MEANS OF DIGITAL IMAGE ANALYSIS |
| ASTM D 7115 : 2010 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
| AASHTO T 260 : 1997(R2016) | METHOD OF TEST FOR SAMPLING AND TESTING FOR CHLORIDE ION IN CONCRETE AND CONCRETE RAW MATERIALS |
| ASTM D 5581 : 2007 : REV A | Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
| ASTM C 593 : 2006 : R2011 | Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization |
| ASTM C 87/C87M : 2017 : REDLINE | Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
| AASHTO PP 74 : 2013 : R2015 | PRACTICE FOR DETERMINATION OF SIZE AND ROUNDNESS OF GLASS BEADS USED IN TRAFFIC MARKINGS BY MEANS OF COMPUTERIZED OPTICAL METHOD |
| AASHTO T 88 : 2013 | METHOD OF TEST FOR PARTICLE SIZE ANALYSIS OF SOILS |
| AASHTO M 33 : 1999 | SPECIFICATION FOR PREFORMED EXPANSION JOINT FILLER FOR CONCRETE (BITUMINOUS TYPE) |
| ASTM C 513 : 2011 | Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength |
| AASHTO T 100 : 2015 | METHOD OF TEST FOR SPECIFIC GRAVITY OF SOILS |
| AASHTO M 190 : 2000 | SPECIFICATION FOR ASPHALT-COATED CORRUGATED METAL CULVERT PIPE AND PIPE-ARCHES |
| ASTM D 5143 : 2006 : R2010 : EDT 1 | Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography |
| AASHTO T 71 : 2008 : R2012 | METHOD OF TEST FOR EFFECT OF ORGANIC IMPURITIES IN FINE AGGREGATE ON STRENGTH OF MORTAR |
| ASTM C 190 : 1985 | Method of Test for Tensile Strength of Hydraulic Cement Mortars (Withdrawn 1990) |
| AASHTO T 167 : 2010 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HOT MIX ASPHALT |
| AASHTO T 280 : 2014 | METHOD OF TEST FOR CONCRETE PIPE, MANHOLE SECTIONS, OR TILE |
| ASTM C 1018 : 1997 | Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006) |
| ASTM C 1078 : 1987 : R1992 : EDT 1 | Test Methods for Determining the Cement Content of Freshly Mixed Concrete (Withdrawn 1998) |
| ASTM D 6607 : 2000 : R2015 | Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
| ASTM C 1506 : 2017 : REDLINE | Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters |
| ASTM C 1138M : 2012 : REDLINE | Standard Test Method for Abrasion Resistance of Concrete (Underwater Method) |
| ASTM D 139 : 2016 : REDLINE | Standard Test Method for Float Test for Bituminous Materials |
| ASTM C 802 : 2014 : REDLINE | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
| ASTM C 1556 : 2011 : REV A : R2016 | Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
| ASTM D 4943 : 2008-07 | TEST METHOD FOR SHRINKAGE FACTORS OF SOILS BY THE WAX METHOD |
| ASTM C 39/C39M : 2018 : REDLINE | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| AASHTO T 178 : 2015(R2019) | METHOD OF TEST FOR PORTLAND-CEMENT CONTENT OF HARDENED HYDRAULIC-CEMENT CONCRETE |
| ASTM D 6084/D6084M : 2013-12 | TEST METHOD FOR ELASTIC RECOVERY OF ASPHALT MATERIALS BY DUCTILOMETER |
| ASTM C 1872 : 2018 | Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement |
| ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| ACI 214.4R : 2010 | GUIDE FOR OBTAINING CORES AND INTERPRETING COMPRESSIVE STRENGTH RESULTS |
| AASHTO M 307 : 2013(R2017) | SPECIFICATION FOR SILICA FUME USED IN CEMENTITIOUS MIXTURES |
| ASTM D 7113/D7113M : 2010 : R2016 | Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods |
| ASTM C 174/C174M : 2017 : REDLINE | Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores |
| ASTM C 1356 : 2007 | Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure |
| AASHTO T 277 : 2015(R2019) | METHOD OF TEST FOR ELECTRICAL INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE ION PENETRATION |
| ASTM D 1856 : 2009 : R2015 | Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
| AASHTO T 210 : 2015 | METHOD OF TEST FOR AGGREGATE DURABILITY INDEX |
| ASTM D 7115 : 2010 : R2015 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
| AASHTO T 153 : 2013(R2017) | METHOD OF TEST FOR FINENESS OF HYDRAULIC CEMENT BY AIR PERMEABILITY APPARATUS |
| ASTM D 6723 : 2012 | Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2021) |
| AASHTO TP 118 : 2015 | METHOD OF TEST FOR CHARACTERIZATION OF THE AIR-VOID SYSTEM OF FRESHLY MIXED CONCRETE BY THE SEQUENTIAL PRESSURE METHOD |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 2172 : 2005 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
| ASTM C 1567 : 2013 : REDLINE | Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) |
| ASTM C 806 : 2013-02 | TEST METHOD FOR RESTRAINED EXPANSION OF EXPANSIVE CEMENT MORTAR |
| ASTM D 2041 : 2003 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
| ASTM E 2883 : 2013 | Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME) |
| ASTM C 88 : 2013-08 | TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| ASTM D 4125 : 2005 | Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
| ASTM C 1105 : 2008 : REV A | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM C 173/C173M : 2016 : REDLINE | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
| ASTM D 6511/D6511M : 2011-07 | TEST METHODS FOR SOLVENT BEARING BITUMINOUS COMPOUNDS |
| ASTM C 900 : 2015 : REDLINE | Standard Test Method for Pullout Strength of Hardened Concrete |
| ASTM C 1524 : 2002 : REV A : R2010 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) (Withdrawn 2019) |
| ASTM C 131/C131M : 2014 : REDLINE | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM D 113 : 2017 | Standard Test Method for Ductility of Asphalt Materials |
| ASTM D 6390 : 2011 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
| ASTM D 6390 : 2011 : R2017 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
| ASTM C 215 : 2014 : REDLINE | Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens |
| ASTM D 7172 : 2014 : REDLINE | Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared |
| ASTM G 180 : 2013 : REDLINE | TEST METHOD FOR CORROSION INHIBITING ADMIXTURES FOR STEEL IN CONCRETE BY POLARIZATION RESISTANCE IN CEMENTITIOUS SLURRIES |
| ASTM C 1245/C1245M : 2012 : REDLINE | Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test) |
| ASTM C 918 : 2002 | Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM C 1067 : 2012 : REDLINE | Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials |
| ASTM C 802 : 2014 : REDLINE | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.