ASTM C 1731 : 2021
Current
The latest, up-to-date edition.
Standard Specification for Concrete Floor Tile
Hardcopy , PDF
English
22-06-2021
Committee |
C 15
|
DocumentType |
Standard
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers concrete floor tile (CFT) for application as interior and exterior flooring. The units described by this specification are manufactured from cementitious materials, mineral aggregates (normal weight, lightweight, or both), water, and additives that are cast into various textures and shapes, often simulating natural stone, brick, terracotta, saltillo, and others.
1.2This specification is limited to requirements for the physical attributes for the CFT units.
1.3The use of results from testing installed CFT units that have been removed from use for determining conformance or nonconformance to the requirements of this specification is beyond the scope of this specification.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1732 : 2019 | Standard Practice for Installation of Concrete Floor Tiles |
ASTM C 39/C39M : 2024 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 140/C140M : 2022 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 1600/C1600M : 2023 | Standard Specification for Rapid Hardening Hydraulic Cement |
ASTM C 150/C150M : 2024 | Standard Specification for Portland Cement |
ASTM C 31/C31M : 2024 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 31/C31M : 2019 : REV A | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 33/C33M : 2023 | Standard Specification for Concrete Aggregates |
ASTM C 140/C140M : 2023 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 494/C494M : 2019 | Standard Specification for Chemical Admixtures for Concrete |
ASTM C 494/C494M : 2019 : EDT 1 | Standard Specification for Chemical Admixtures for Concrete |
ASTM C 140/C140M : 2022 : REV B | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 31/C31M : 2022 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 31/C31M : 2021 : REV A | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 1600/C1600M : 2019 | Standard Specification for Rapid Hardening Hydraulic Cement |
ASTM C 1093 : 2019 | Standard Practice for Accreditation of Testing Agencies for Masonry |
ASTM C 33/C33M : 2018 | Standard Specification for Concrete Aggregates |
ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
ASTM C 39/C39M : 2021 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 1232 : 2020 | Standard Terminology for Masonry |
ASTM C 595/C595M : 2021 | Standard Specification for Blended Hydraulic Cements |
ASTM C 331/C331M : 2017 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
ASTM C 1157/C1157M : 2023 | Standard Performance Specification for Hydraulic Cement |
ASTM C 39/C39M : 2023 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 989/C989M : 2018 : REV A | Standard Specification for Slag Cement for Use in Concrete and Mortars |
ASTM C 157/C157M : 2017 | Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete |
ASTM C 31/C31M : 2023 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 331/C331M : 2023 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
ASTM C 979/C979M : 2024 | Standard Specification for Pigments for Integrally Colored Concrete |
ASTM C 595/C595M : 2020 | Standard Specification for Blended Hydraulic Cements |
ASTM C 31/C31M : 2024 : REV B | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 33/C33M : 2024 | Standard Specification for Concrete Aggregates |
ASTM C 31/C31M : 2024 : REV A | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 39/C39M : 2015 : REV A | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 618 : 2023 : EDT 1 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 140/C140M : 2018 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 150/C150M : 2021 | Standard Specification for Portland Cement |
ASTM C 39/C39M : 2020 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 1157/C1157M : 2020 : REV A | Standard Performance Specification for Hydraulic Cement |
ASTM C 1232 : 2023 | Standard Terminology for Masonry |
ASTM C 157/C157M : 2024 : EDT 1 | Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete |
ASTM C 618 : 2022 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 140/C140M : 2022 : REV C | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 1602/C1602M : 2018 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
ASTM C 31/C31M : 2021 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 618 : 2023 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 1093 : 2023 | Standard Practice for Accreditation of Testing Agencies for Masonry |
ASTM C 1602/C1602M : 2022 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
ASTM C 140/C140M : 2020 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 157/C157M : 2024 | Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete |
ASTM C 595/C595M : 2024 | Standard Specification for Blended Hydraulic Cements |
ASTM C 1232 : 2024 | Standard Terminology for Masonry |
ASTM C 1093 : 2022 | Standard Practice for Accreditation of Testing Agencies for Masonry |
ASTM C 595/C595M : 2023 | Standard Specification for Blended Hydraulic Cements |
ASTM C 31/C31M : 2017 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 31/C31M : 2015 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 140/C140M : 2024 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 1232 : 2021 | Standard Terminology for Masonry |
ASTM C 979/C979M : 2016 | Standard Specification for Pigments for Integrally Colored Concrete |
ASTM C 140/C140M : 2020 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 39/C39M : 2018 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 31/C31M : 2019 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 989/C989M : 2024 | Standard Specification for Slag Cement for Use in Concrete and Mortars |
ASTM C 140/C140M : 2023 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 1116/C1116M : 2023 | Standard Specification for Fiber-Reinforced Concrete |
ASTM C 618 : 2019 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 494/C494M : 2024 | Standard Specification for Chemical Admixtures for Concrete |
ASTM C 150/C150M : 2020 | Standard Specification for Portland Cement |
ASTM C 172/C172M : 2014 : REV A | Standard Practice for Sampling Freshly Mixed Concrete |
ASTM C 989/C989M : 2022 | Standard Specification for Slag Cement for Use in Concrete and Mortars |
ASTM C 150/C150M : 2022 | Standard Specification for Portland Cement |
ASTM C 140/C140M : 2022 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 1232 : 2021 : REV A | Standard Terminology for Masonry |
ASTM C 140/C140M : 2021 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 1093 : 2022 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.