ASTM C 1722 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Repair and Restoration of Dimension Stone
Hardcopy , PDF
24-04-2023
English
08-11-2018
This guide describes materials and procedures for restoring facades constructed of or finished with dimension stone.
Committee |
C 18
|
DocumentType |
Guide
|
Pages |
9
|
ProductNote |
This standard refers to :- STD 1-12.026
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide describes materials and procedures for restoring facades constructed of or finished with dimension stone. All of the materials, procedures, and principles are suitable for restoration of historic and nonhistosric structures.
1.2This guide is not intended to address restoration of interior dimension stone, although many of the materials and procedures may be suitable for interior use.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1489 : 2015 : R2022 | Standard Specification for Lime Putty for Structural Purposes |
ASTM C 1180 : 2010 | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 1515 : 2001 | Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing |
ASTM C 1324 : 2002 : REV A | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 1242 : 2010 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1180 : 2003 | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 1515 : 2013 | Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing |
ASTM C 1324 : 2015 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 1242 : 2022 : REV C | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1180 : 2002 | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 1242 : 2003 : REV A | Standard Guide for Selection, Design, and Installation of Exterior Dimension Stone Anchors and Anchoring Systems |
ASTM C 1521 : 2009 | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 1242 : 2021 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1242 : 2012 : REV A : EDT 1 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1242 : 2014 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1242 : 2022 : REV A | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1515 : 2009 | Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing |
ASTM C 1242 : 2019 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1489 : 2015 | Standard Specification for Lime Putty for Structural Purposes |
ASTM C 1242 : 2003 | Standard Guide for Selection, Design, and Installation of Exterior Dimension Stone Anchors and Anchoring Systems |
ASTM C 1180 : 2018 | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 119 : 2022 | Standard Terminology Relating to Dimension Stone |
ASTM C 1521 : 2009 : EDT 1 | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 1180 : 2003 : REV A : EDT 1 | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 1242 : 2015 : REV A | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1324 : 1996 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 1242 : 2019 : REV A | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1521 : 2008 | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 1324 : 2002 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 1242 : 2022 : REV B | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1180 : 2003 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 1180 : 2022 | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 1242 : 2022 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1521 : 2002 | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 1489 : 2001 | Standard Specification for Lime Putty for Structural Purposes |
ASTM C 1242 : 2011 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1324 : 2004 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 1489 : 2001 : R2008 : EDT 1 | Standard Specification for Lime Putty for Structural Purposes |
ASTM C 1324 : 2020 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 1242 : 2015 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1242 : 2002 | Standard Guide for Selection, Design, and Installation of Exterior Dimension Stone Anchors and Anchoring Systems |
ASTM C 1242 : 2004 | Standard Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems |
ASTM C 1242 : 2005 | Standard Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems |
ASTM C 1521 : 2019 | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 1324 : 2010 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 1521 : 2008 : REV A | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 1515 : 2014 | Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing |
ASTM C 1242 : 2000 | Standard Guide for Design, Selection, and Installation of Stone Anchors and Anchoring Systems |
ASTM C 1180 : 2007 | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 1242 : 2018 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1242 : 2020 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1242 : 2001 | Standard Guide for Design, Selection, and Installation of Stone Anchors and Anchoring Systems |
ASTM C 1242 : 2016 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1521 : 2002 : REV A | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 1242 : 2012 : REV A | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1521 : 2019 : R2020 | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 1515 : 2011 | Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing |
ASTM C 1324 : 2005 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 1242 : 2012 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 10 : 1976 | Specification for Natural Cement (Withdrawn 1978) |
ASTM C 1242 : 2002 : REV A | Standard Guide for Selection, Design, and Installation of Exterior Dimension Stone Anchors and Anchoring Systems |
ASTM C 1242 : 2018 : REV A | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1521 : 2013 | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM C 150 : 2002 : REV A : EDT 1 | Standard Specification for Portland Cement |
ASTM C 1180 : 2019 | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 1242 : 2004 : REV A | Standard Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems |
ASTM C 1180 : 2000 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
ASTM C 119 : 2020 | Standard Terminology Relating to Dimension Stone |
ASTM C 1242 : 2014 : REV A | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
ASTM C 1324 : 2003 | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.