ASTM C 1396/C1396M : 2017 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Gypsum Board
14-10-2024
English
01-07-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.01, 2017 Defines the gypsum boards.
| Committee |
C 11
|
| DevelopmentNote |
Supersedes ASTM C 1395/C1395M, ASTM C 36/C36M, ASTM C 37/C37M, ASTM C 442/C442M, ASTM C 630/C630M, ASTM C 79/C79M, ASTM C 931/C931M & ASTM C 960/C960M. (01/2005) Supersedes ASTM C 588/C588M. (11/2005)
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
|
1.1This specification covers the gypsum boards described in 1.1.1 – 1.1.9.
Note 1:Specifications C840, C841, C844 and C1280 contain application procedures for gypsum board.
1.1.1Gypsum wallboard, designed for use on walls, ceilings, or partitions and that affords a surface suitable to receive decoration.
1.1.2Predecorated gypsum board, designed for use as the finished surfacing for walls, ceilings, or partitions.
1.1.3Gypsum backing board, coreboard, and shaftliner board, designed for use as a base in multilayer systems or as a gypsum stud or core in semisolid or solid gypsum board partitions, or in shaft wall assemblies.
Note 2:The terms backing board, coreboard, and shaftliner board refer to different end uses. The term gypsum backing board, as used in this specification, shall include gypsum coreboard and gypsum shaftliner board unless otherwise stated.
1.1.4Water-resistant gypsum backing board, designed primarily to be used as a base for the application of ceramic or plastic tile on walls or ceilings. This product is also suitable for decoration.
1.1.5Exterior gypsum soffit board, designed for use on exterior soffits and carport ceilings that are completely protected from contact with liquid water.
1.1.6Gypsum sheathing board, designed for use as sheathing on buildings.
1.1.7Gypsum base for veneer plaster, designed for use as a base for the application of gypsum veneer plaster.
1.1.8Gypsum lath, designed for use as a base for the application of gypsum plaster.
1.1.9Gypsum ceiling board, designed for use on interior ceilings with framing spaced not more than 24 in. [610 mm] on center and that affords a surface suitable to receive water-based texture and other decoration. This product is also suitable for use on interior walls.
1.2Specifications applicable to all gypsum boards are located in Section 1 – 4 and 13 – 15. Specifications applicable to specific gypsum boards are located in the following sections:
| Section | ||
| Gypsum Wallboard, Predecorated Gypsum Board, and Laminated Gypsum Board | 5 | |
| Gypsum backing board, gypsum coreboard, | 6 | |
| Water-resistant gypsum backing board | 7 | |
| Exterior gypsum soffit board | 8 | |
| Gypsum sheathing board | 9 | |
| Gypsum base for veneer plaster | 10 | |
| Gypsum lath | 11 | |
| Gypsum Ceiling Board | 12 |
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 474 : 2015 : REDLINE | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| ASTM D 7374 : 2008 | Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber |
| ASTM C 587 : 2004 : R2014 | Standard Specification for Gypsum Veneer Plaster |
| ASTM C 1597M : 2004 : R2009 : EDT 1 | Standard Specification for Gypsum Wallboard (Hard Metric Sizes) (Withdrawn 2013) |
| ASTM C 1288 : 2017 : REDLINE | Standard Specification for Fiber-Cement Interior Substrate Sheets |
| ASTM D 6464 : 2003 : REV A : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 587 : 2004 | Standard Specification for Gypsum Veneer Plaster |
| ASTM C 844 : 2015 : REDLINE | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
| ASTM D 7374 : 2008 : R2015 | Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber |
| NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
| ASTM E 2231 : 2018 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
| FC 4-740-14N : 2014 | FACILITIES CRITERIA - NAVY AND MARINE CORPS CHILD DEVELOPMENT CENTERS |
| ASTM D 7470 : 2008 | Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs |
| ICC IBC INTERNATIONAL BUILDING CODE : 2015 | INTERNATIONAL BUILDING CODE |
| ASTM C 1186 : 2008 : R2012 | Standard Specification for Flat Fiber-Cement Sheets |
| ASTM E 2957 : 2017 : REDLINE | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
| ASTM D 6464 : 2003 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 1858 : 2017 | StandardPracticefor Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions |
| ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
| ASTM C 11 : 2017-06 | TERMINOLOGY RELATING TO GYPSUM AND RELATED BUILDING MATERIALS AND SYSTEMS |
| ASTM C 1597M : 2004 | Standard Specification for Gypsum Wallboard (Hard Metric Sizes) |
| NFPA 265 : 2015 | METHODS OF FIRE TESTS FOR EVALUATING ROOM FIRE GROWTH CONTRIBUTION OF TEXTILE OR EXPANDED VINYL WALL COVERINGS ON FULL HEIGHT PANELS AND WALLS |
| ASTM C 1766 : 2015 : REDLINE | Standard Specification for Factory-Laminated Gypsum Panel Products |
| ASTM C 645 : 2014-11 | SPECIFICATION FOR NONSTRUCTURAL STEEL FRAMING MEMBERS |
| ASTM D 6464 : 2003 : REV A : R2017 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ISO/TR 834-2:2009 | Fire-resistance tests Elements of building construction Part 2: Guidance on measuring uniformity of furnace exposure on test samples |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| ASTM E 2634 : 2017-06 | SPECIFICATION FOR FLAT WALL INSULATING CONCRETE FORM (ICF) SYSTEMS |
| ACI 216.1M : 2014 | CODE REQUIREMENTS FOR DETERMINING FIRE RESISTANCE OF CONCRETE AND MASONRY CONSTRUCTION ASSEMBLIES |
| ASTM C 557 : 2003 : R2009 : EDT 1 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 587 : 2004 : R2009 | Standard Specification for Gypsum Veneer Plaster |
| ASTM C 557 : 2003 : EDT 1 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 954 : 2015-06 | SPECIFICATION FOR STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO STEEL STUDS FROM 0.033 IN. (0.84 MM) TO 0.112 IN. (2.84 MM) IN THICKNESS |
| ASTM E 2404 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
| ASTM C 557 : 2003 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 6464 : 2003 : REV A | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 1186 : 2008 : R2016 | Standard Specification for Flat Fiber-Cement Sheets |
| CSA O86 : 2014 | ENGINEERING DESIGN IN WOOD |
| ACI 216.1 : 2014 | CODE REQUIREMENTS FOR DETERMINING FIRE RESISTANCE OF CONCRETE AND MASONRY CONSTRUCTION ASSEMBLIES |
| ASTM C 1186 : 2008 | Standard Specification for Flat Fiber-Cement Sheets |
| ASTM D 6464 : 2003 : REV A : R2009 : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 1325 : 2017-02 | SPECIFICATION FOR NON-ASBESTOS FIBER-MAT REINFORCED CEMENTITIOUS BACKER UNITS |
| ASTM C 557 : 2003 : R2017 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 7470 : 2008 : R2015 | Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM C 844 : 2015 : REDLINE | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
| ASTM C 645 : 2014-11 | SPECIFICATION FOR NONSTRUCTURAL STEEL FRAMING MEMBERS |
| ASTM C 11 : 2017-06 | TERMINOLOGY RELATING TO GYPSUM AND RELATED BUILDING MATERIALS AND SYSTEMS |
| ASTM D 3273 : 2016 : REDLINE | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.