ASTM C 1369 : 2019
Current
The latest, up-to-date edition.
Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
Hardcopy , PDF
English
01-01-2019
This specification describes the properties of cold, liquid-applied, single or multi-component, chemically curing, elastomeric sealants used as the secondary seal of sealed insulating glass units, hereinafter referred to as the “sealant” (see Fig. 1).
Committee |
C 24
|
DocumentType |
Standard
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification describes the properties of cold, liquid-applied, single or multi-component, chemically curing, elastomeric sealants used as the secondary seal of sealed insulating glass units, hereinafter referred to as the “sealant” (see Fig. 1). These sealants are intended to be a structural component of sealed insulating glass (IG) units used in structural sealant glazing (hereinafter referred to as SSG). Typical designs and considerations can be found in Guide C1249. Presently only certain silicone sealants are recognized as having the necessary durability for use as secondary sealant in IG units in SSG applications.
FIG. 1 Cutaway Section of IG Unit Edge Seal
1.2This specification does not describe all of the necessary properties of the sealant. Only those properties for which there are ASTM test methods and industry-agreed-upon minimum acceptable test requirements are described by this specification. Additional properties will be added as ASTM test methods for these properties become available.
1.3This specification only addresses the durability of the secondary edge sealants for structurally glazed insulating glass units. Durability of sealed insulating glass units can be found in specifications and guides that reside within ASTM Committee E06.
1.4The committee with jurisdiction for this standard is not aware of any comparable standard published by other organizations.
1.5The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information purposes only.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2190 : 2019 | Standard Specification for Insulating Glass Unit Performance and Evaluation |
ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
ASTM C 1193 : 2016 | Standard Guide for Use of Joint Sealants |
ASTM C 1249 : 2018 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
ASTM C 792 : 2023 | Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants |
ASTM C 1184 : 2000 : REV A | Standard Specification for Structural Silicone Sealants |
ASTM C 661 : 2015 : R2022 | Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
ASTM C 1184 : 2018 : EDT 1 | Standard Specification for Structural Silicone Sealants |
ASTM C 1265 : 1994 : R2011 | Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 1135 : 2000 : R2011 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 717 : 2019 | Standard Terminology of Building Seals and Sealants |
ASTM C 1184 : 2018 | Standard Specification for Structural Silicone Sealants |
ASTM C 661 : 2015 | Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
ASTM C 1265 : 1994 : R2005 : EDT 1 | Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 1135 : 2019 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1249 : 2006 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
ASTM C 1265 : 2017 | Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 1135 : 2019 : R2024 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1184 : 2000 : REV A : EDT 1 | Standard Specification for Structural Silicone Sealants |
ASTM C 1135 : 2000 : R2005 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1249 : 2018 : R2023 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
ASTM C 1135 : 2000 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1135 : 2015 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1249 : 1993 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
ASTM C 1265 : 1994 : R1999 | Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 679 : 2015 : R2022 | Standard Test Method for Tack-Free Time of Elastomeric Sealants |
ASTM C 792 : 2015 : R2020 | Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants |
ASTM C 1249 : 2018 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
ASTM C 717 : 2024 | Standard Terminology of Building Seals and Sealants |
ASTM C 679 : 2015 | Standard Test Method for Tack-Free Time of Elastomeric Sealants |
ASTM C 1265 : 2022 | Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 1184 : 2005 | Standard Specification for Structural Silicone Sealants |
ASTM C 1184 : 2013 | Standard Specification for Structural Silicone Sealants |
ASTM C 1184 : 2014 | Standard Specification for Structural Silicone Sealants |
ASTM C 1184 : 2023 | Standard Specification for Structural Silicone Sealants |
ASTM C 1249 : 2006 : REV A | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
ASTM C 1249 : 2006 : REV A : R2010 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.