ASTM C 1330 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
Hardcopy , PDF
17-06-2023
English
08-10-2018
Committee |
C 24
|
DocumentType |
Standard
|
Pages |
2
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers the basic requirements for cylindrical sealant backing to be used with cold liquid applied sealants for use in building seals.
1.2Cylindrical sealant backing serves one or more of the following functions:
1.2.1Limits the amount and depth of sealant applied into a joint,
1.2.2Acts as a bond breaker to allow joint movement without undue stress to the sealant,
1.2.3Provides a form to assist the sealant in developing the proper shape factor, and
1.2.4Acts as a barrier to the flow of sealant through the joint.
1.3The committee with jurisdiction over this standard is not aware of any comparable standards published by other ASTM committees or other organizations.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1642 : 2020 | Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials |
ASTM C 1193 : 2016 : R2023 | Standard Guide for Use of Joint Sealants |
ASTM C 1193 : 2016 | Standard Guide for Use of Joint Sealants |
ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
ASTM C 1642 : 2014 | Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials |
ASTM D 5249 : 2010 : R2016 | Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
ASTM C 1253 : 1993 : R1998 | Standard Test Method for Determining the Outgassing Potential of Sealant Backing |
ASTM C 1087 : 2023 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM D 5249 : 1995 : R2000 | Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
ASTM C 1087 : 2000 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 1253 : 2014 : R2019 | Standard Test Method for Determining the Outgassing Potential of Sealant Backing |
ASTM C 1016 : 2014 | Standard Test Method for Determination of Water Absorption of Sealant Backing<brk/> (Joint Filler) Material |
ASTM D 1623 : 1978 : R1995 | Standard Test Method for Tensile And Tensile Adhesion Properties Of Rigid Cellular Plastics |
ASTM C 1087 : 2016 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 1016 : 2014 : R2022 | Standard Test Method for Determination of Water Absorption of Sealant Backing<brk/> (Joint Filler) Material |
ASTM C 1016 : 1994 : REV A | Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material |
ASTM D 1623 : 2017 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
ASTM D 1623 : 2017 : R2023 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
ASTM D 5249 : 2010 : R2021 | Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints |
ASTM D 1622 : 1993 | Standard Test Method for Apparent Density of Rigid Cellular Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.