ASTM C 1283 : 2015 : R2021
Current
The latest, up-to-date edition.
Standard Practice for Installing Clay Flue Lining
Hardcopy , PDF
English
06-04-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 04
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers the minimum requirements for installing clay flue lining for residential concrete or masonry chimneys.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 315 : 2007 : R2021 | Standard Specification for Clay Flue Liners and Chimney Pots |
| ASTM C 170/C170M : 2023 | Standard Test Method for Compressive Strength of Dimension Stone |
| ASTM C 216 : 2021 | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) |
| ASTM C 90 : 2023 | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 90 : 2021 | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 270 : 1919 : REV A : EDT 1 | Standard Specification for Mortar for Unit Masonry |
| ASTM C 90 : 2024 | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 99/C99M : 2018 | Standard Test Method for Modulus of Rupture of Dimension Stone |
| ASTM C 27 : 1998 : R2022 | Standard Classification of Fireclay and High-Alumina Refractory Brick |
| ASTM C 129 : 2022 | Standard Specification for Nonloadbearing Concrete Masonry Units |
| ASTM C 896 : 2021 : REV A | Standard Terminology Relating to Clay Products |
| ASTM C 129 : 2017 | Standard Specification for Nonloadbearing Concrete Masonry Units |
| ASTM C 652 : 2022 | Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) |
| ASTM C 652 : 2019 : REV B | Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) |
| ASTM C 896 : 2024 | Standard Terminology Relating to Clay Products |
| ASTM C 90 : 2022 | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 896 : 2021 | Standard Terminology Relating to Clay Products |
| ASTM C 55 : 2017 | Standard Specification for Concrete Building Brick |
| ASTM C 90 : 2016 : REV A | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 99/C99M : 2024 | Standard Test Method for Modulus of Rupture of Dimension Stone |
| ASTM C 216 : 2019 | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) |
| ASTM C 27 : 1998 : R2018 | Standard Classification of Fireclay and High-Alumina Refractory Brick |
| ASTM C 216 : 2023 | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) |
| ASTM C 199 : 1984 : R2016 | Standard Test Method for Pier Test for Refractory Mortars |
| ASTM C 24 : 2009 : R2018 | Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials |
| ASTM C 55 : 2023 | Standard Specification for Concrete Building Brick |
| ASTM C 896 : 2022 | Standard Terminology Relating to Clay Products |
| ASTM C 199 : 2022 | Standard Test Method for Pier Test for Refractory Mortars |
| ASTM C 55 : 2022 | Standard Specification for Concrete Building Brick |
| ASTM C 896 : 2020 : EDT 1 | Standard Terminology Relating to Clay Products |
| ASTM C 216 : 2022 | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) |
| ASTM C 170/C170M : 2024 | Standard Test Method for Compressive Strength of Dimension Stone |
| ASTM C 170/C170M : 2024 : REV A | Standard Test Method for Compressive Strength of Dimension Stone |
| ASTM C 652 : 2021 | Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) |
| ASTM C 129 : 2023 | Standard Specification for Nonloadbearing Concrete Masonry Units |
| ASTM C 24 : 2009 : R2022 | Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials |
| ASTM C 270 : 2024 | Standard Specification for Mortar for Unit Masonry |
| ASTM C 170/C170M : 2017 | Standard Test Method for Compressive Strength of Dimension Stone |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.