ASTM C 11 : 2023
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Gypsum and Related Building Materials and Systems
Available format(s)
Hardcopy , PDF
Superseded date
15-05-2024
Superseded by
Language(s)
English
Published date
13-01-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 11
|
| DocumentType |
Reference Material
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This standard covers terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1280 : 2018 | Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing |
| ASTM C 1178/C1178M : 2018 | Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel |
| ASTM C 956 : 2004 : R2019 | Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete |
| ASTM C 841 : 2003 : R2018 | Standard Specification for Installation of Interior Lathing and Furring |
| ASTM C 1860 : 2023 : REV A | Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension |
| ASTM C 219 : 2020 : REV A | Standard Terminology Relating to Hydraulic and Other Inorganic Cements |
| ASTM C 61/C61M : 2000 : R2020 | Standard Specification for Gypsum Keene's Cement |
| ASTM C 1921/C1921M : 2022 | Standard Test Method for Comparative Impact Testing of Gypsum Panel Outside 90° Corner Systems |
| ASTM C 843 : 2017 | Standard Specification for Application of Gypsum Veneer Plaster |
| ASTM C 1516 : 2005 : R2023 | Standard Practice for Application of Direct-Applied Exterior Finish Systems |
| ASTM C 1264 : 2019 | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products |
| ASTM C 28/C28M : 2010 : R2020 | Standard Specification for Gypsum Plasters |
| ASTM C 1381/C1381M : 1997 : R2018 | Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1396/C1396M : 2017 | Standard Specification for Gypsum Board |
| ASTM C 475/C475M : 2017 : R2022 | Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
| ASTM C 35 : 2001(R2019) | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM C 897 : 2015 : R2020 | Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters |
| ASTM C 954 : 2022 | Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
| ASTM E 1602 : 2003 : R2017 | Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
| ASTM C 1535 : 2005 : R2023 | Standard Practice for Application of Exterior Insulation and Finish Systems Class PI |
| ASTM C 474 : 2015 : R2020 | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| ASTM C 473 : 2019 | Standard Test Methods for Physical Testing of Gypsum Panel Products |
| ASTM C 955 : 2018 : EDT 1 | Standard Specification for Cold-Formed Steel Structural Framing Members |
| ASTM C 1002 : 2022 | Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
| ASTM C 1007 : 2020 | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
| ASTM C 754 : 2020 | Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products |
| ASTM C 844 : 2015 : R2021 | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
| ASTM C 842 : 2005 : R2021 | Standard Specification for Application of Interior Gypsum Plaster |
| ASTM C 645 : 2018 | Standard Specification for Nonstructural Steel Framing Members |
| ASTM C 1397 : 2013 : R2019 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage |
| ASTM C 932 : 2006 : R2019 | Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering |
| ASTM E 2266 : 2022 | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM C 926 : 2022 : REV C | Standard Specification for Application of Portland Cement-Based Plaster |
| ASTM C 1032 : 2018 | Standard Specification for Woven Wire Plaster Base |
| ASTM C 840 : 2020 | Standard Specification for Application and Finishing of Gypsum Board |
| ASTM C 1467/C1467M : 2000 : R2021 | Standard Specification for Installation of Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1047 : 2019 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
| ASTM C 1925 : 2022 | Standard Test Method for Strength Properties of Direct Hung, Suspended T-bar Type Ceiling System Components Intended to Receive Gypsum Panel Products |
| ASTM C 471M : 2020 : REV A : EDT 1 | Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) |
| ASTM C 22/C22M : 2000 : R2021 | Standard Specification for Gypsum |
| ASTM C 1278/C1278M : 2017 | Standard Specification for Fiber-Reinforced Gypsum Panel |
| ASTM C 317/C317M : 2000 : R2019 | Standard Specification for Gypsum Concrete |
| ASTM C 587 : 2004 : R2018 | Standard Specification for Gypsum Veneer Plaster |
| ASTM C 933 : 2018 | Standard Specification for Welded Wire Lath |
| ASTM C 1766 : 2015(R2019) | Standard Specification for Factory-Laminated Gypsum Panel Products |
| ASTM C 59/C59M : 2000 : R2020 | Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
| ASTM C 472 : 2020 | Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete |
| ASTM C 1513 : 2018 | Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections |
| ASTM C 1629/C1629M : 2019 | Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels |
| ASTM C 1355/C1355M : 1996 : R2020 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM C 631 : 2009 : R2020 | Standard Specification for Bonding Compounds for Interior Gypsum Plastering |
| ASTM C 1177/C1177M : 2017 | Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
| ASTM C 1795 : 2017 | Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels |
| ASTM C 1858 : 2017 : REV A : R2021 | Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions |
| ASTM C 318/C318M : 2013 : R2018 | Standard Specification for Gypsum Formboard |
| ASTM C 1063 : 2022 : REV A | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
| ASTM C 1381/C1381M : 2023 | Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 317/C317M : 2024 | Standard Specification for Gypsum Concrete |
| ASTM C 1177/C1177M : 2024 | Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
| ASTM C 219 : 2024 | Standard Terminology Relating to Hydraulic and Other Inorganic Cements |
| ASTM C 1063 : 2023 | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
| ASTM C 840 : 2023 | Standard Specification for Application and Finishing of Gypsum Board |
| ASTM C 1280 : 2018 : R2023 | Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing |
| ASTM C 1178/C1178M : 2024 | Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel |
| ASTM C 841 : 2023 | Standard Specification for Installation of Interior Lathing and Furring |
| ASTM C 471M : 2024 | Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) |
| ASTM C 933 : 2023 | Standard Specification for Welded Wire Lath |
| ASTM C 926 : 2024 | Standard Specification for Application of Portland Cement-Based Plaster |
| ASTM C 1881 : 2020 | Standard Guide for Closed-Loop Recycling of Scrap Gypsum Panel Products |
| ASTM C 1795 : 2017 : R2024 | Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels |
| ASTM C 1860 : 2023 : REV C : EDT 1 | Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension |
| ASTM C 1629/C1629M : 2023 | Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels |
| ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 96/E96M : 2022 : REV A : EDT 1 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM C 317/C317M : 2024 | Standard Specification for Gypsum Concrete |
| ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 96/E96M : 2023 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM E 96/E96M : 2024 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM C 843 : 2023 | Standard Specification for Application of Gypsum Veneer Plaster |
| ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 843 : 2017 | Standard Specification for Application of Gypsum Veneer Plaster |
| ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.