ASTM C 1093 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Accreditation of Testing Agencies for Masonry
Hardcopy , PDF
09-03-2022
English
29-01-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 15
|
| DocumentType |
Standard Practice
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers the minimum requirements for laboratory personnel, for establishing and maintaining a quality system, and it establishes minimum qualifications for agencies engaged in the testing of masonry materials.
1.2Criteria are provided for evaluating the capability of an agency to properly perform designated tests on masonry materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects.
1.3This practice can be used as a basis to evaluate testing agencies, and it is intended for use for the qualifying or accrediting of testing agencies, or both, public or private, engaged in the testing of masonry materials.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1660 : 2010 : R2018 | Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry |
| ASTM C 1716/C1716M : 2019 | Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms |
| ASTM C 1731 : 2016 | Standard Specification for Concrete Floor Tile |
| ASTM E 329 : 2018 | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
| ASTM C 67/C67M : 2019 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 1314 : 2018 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 426 : 2016 | Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units |
| ASTM C 1262/C1262M : 2018 | Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units |
| ASTM C 1405 : 2019 | Standard Specification for Glazed Brick (Single Fired, Brick Units) |
| ASTM C 780 : 2019 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 140/C140M : 2018 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1713 : 2017 | Standard Specification for Mortars for the Repair of Historic Masonry |
| ASTM C 1019 : 2020 | Standard Test Method for Sampling and Testing Grout for Masonry |
| ASTM C 780 : 2020 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 1384 : 2018 : EDT 1 | Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1731 : 2021 | Standard Specification for Concrete Floor Tile |
| ASTM C 1716/C1716M : 2021 | Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms |
| ASTM E 329 : 2021 | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
| ASTM C 1552 : 2016 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1195 : 2021 | Standard Test Method for Absorption of Architectural Cast Stone |
| ASTM C 67/C67M : 2021 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 173/C173M : 2009 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
| ASTM C 109/C109M : 2020 : REV B | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 470/C470M : 1998 | Standard Specification for Molds for Forming Concrete Test Cylinders Vertically |
| ASTM C 1232 : 2020 | Standard Terminology for Masonry |
| ASTM C 109/C109M : 2021 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 1314 : 2021 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM C 1232 : 2021 | Standard Terminology for Masonry |
| ASTM C 140/C140M : 2020 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 230/C230M : 2020 | Standard Specification for Flow Table for Use in Tests of Hydraulic Cement |
| ASTM C 67/C67M : 2020 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 1232 : 2021 : REV A | Standard Terminology for Masonry |
| ASTM C 140/C140M : 2021 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 780 : 2000 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.