ASTM B 577 : 2024
Current
The latest, up-to-date edition.
Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
Hardcopy , PDF
English
12-07-2024
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
B 05
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover procedures for determining the presence of cuprous oxide (Cu2O) in products made from deoxidized and oxygen-free copper.
1.2The test methods appear in the following order:
| Sections | |
| Microscopical Examination without Thermal Treatment | 9 – 11 |
| Microscopical Examination after Thermal Treatment | 13 – 15 |
| Closed Bend Test after Thermal Treatment | 17 – 19 |
| Reverse Bend Test after Thermal Treatment | 21 – 23 |
1.3Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM B 88 : 2022 | Standard Specification for Seamless Copper Water Tube |
| ASTM B 280 : 2023 | Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
| ASTM B 188 : 2015 : R2023 | Standard Specification for Seamless Copper Bus Pipe and Tube |
| ASTM B 1003 : 2016 : R2023 | Standard Specification for Seamless Copper Tube for Linesets |
| ASTM B 379 : 2020 | Standard Specification for Phosphorized Coppers—Refinery Shapes |
| ASTM F 68 : 2016 | Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices |
| ASTM B 170 : 1999 : R2020 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM B 919 : 2019 | Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM B 152/B152M : 2024 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| ASTM B 447 : 2012 : REV A : R2021 | Standard Specification for Welded Copper Tube |
| ASTM B 302 : 2017 | Standard Specification for Threadless Copper Pipe, Standard Sizes |
| ASTM B 1014 : 2020 | Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s) |
| ASTM B 249/B249M : 2023 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings |
| ASTM B 187/B187M : 2020 | Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes |
| ASTM B 49 : 2020 | Standard Specification for Copper Rod for Electrical Purposes |
| ASTM B 68/B68M : 2019 | Standard Specification for Seamless Copper Tube, Bright Annealed |
| ASTM B 837 : 2019 | Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems |
| ASTM B 88M : 2020 | Standard Specification for Seamless Copper Water Tube (Metric) |
| ASTM B 75/B75M : 2020 | Standard Specification for Seamless Copper Tube |
| ASTM B 950 : 2023 | Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys |
| ASTM B 272 : 2012 : R2019 | Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip) |
| ASTM B 640 : 2012 : REV A : R2021 | Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service |
| ASTM B 42 : 2020 | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| ASTM B 360 : 2020 | Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications |
| ASTM B 372 : 2022 | Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube |
| ASTM B 743 : 2023 | Standard Specification for Seamless Copper Tube in Coils |
| ASTM B 846 : 2019 : REV A | Standard Terminology for Copper and Copper Alloys |
| ASTM B 846 : 2024 | Standard Terminology for Copper and Copper Alloys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.