ASTM B 499 : 2009 : R2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
Hardcopy , PDF
24-05-2021
English
27-05-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 02.05, 2017 Defines the use of magnetic instruments for the nondestructive measurement of the thickness of nonmagnetic coatings over ferrous or other magnetic base metals.
| Committee |
B 08
|
| DocumentType |
Test Method
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2014
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the use of magnetic instruments for the nondestructive measurement of the thickness of nonmagnetic coatings over ferrous or other magnetic base metals. It is intended to supplement manufacturers’ instructions for the operation of the instruments and is not intended to replace them.
1.2These instruments measure either the magnetic attraction between a magnet and the basis metal, as influenced by the presence of the coating (categorized as “magnetic pull-off”), or the change in magnetic-flux density within the probe (categorized as “electronic”). These instruments cannot distinguish the thickness of individual layers. They can only measure the cumulative thickness of all layers beneath the probe down to the base metal.
1.3Measurements made in accordance with this test method will be in compliance with the requirements of ISO International Standard 2178 as printed in 1982.
1.4The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM B 766 : 1986 : R2015 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 842 : 1999 : R2016 | Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits |
| ASTM B 689 : 1997 : R2018 : EDT 1 | Standard Specification for Electroplated Engineering Nickel Coatings |
| ASTM B 456 : 2017 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
| ASTM B 244 : 2009 : R2021 | Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments |
| ASTM B 488 : 2018 | Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses |
| ASTM B 733 : 2015 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM B 816 : 2000 : R2021 | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| ASTM B 695 : 2004 : R2016 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
| ASTM F 1941/F1941M : 2016 | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
| ASTM B 659 : 1990 : R2021 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ASTM B 635 : 2000 : R2015 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM B 999 : 2015 | Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate |
| ASTM B 696 : 2000 : R2015 | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| ASTM B 579 : 1973 : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM B 699 : 1986 : R2021 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM B 177/B177M : 2011 : R2017 | Standard Guide for Engineering Chromium Electroplating |
| ASTM E 376 : 2019 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods |
| ASTM A 896/A896M : 2009 : R2019 | Standard Practice for Conducting Case Studies on Galvanized Structures |
| ASTM B 200 : 1985 : R2015 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM A 1074 : 2011 : R2020 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
| ASTM F 3393 : 2020 : EDT 1 | Zinc-Flake Coating Systems for Fasteners |
| ASTM B 650 : 1995 : R2018 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM B 605 : 1995 : REV A : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 633 : 2019 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel |
| ASTM B 700 : 2020 | Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
| ASTM B 555 : 1986 : R2018 | Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test |
| ASTM B 840 : 2015 | Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits |
| ASTM B 679 : 1998 : R2015 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM D 7270 : 2007 : R2013 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
| ASTM B 984 : 2012 : R2020 : EDT 1 | Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use |
| ASTM B 545 : 2013 | Standard Specification for Electrodeposited Coatings of Tin |
| ASTM D 5087 : 2002 : R2021 | Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM F 3019/F3019M : 2019 | Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners |
| ASTM B 530 : 2009 : R2021 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates |
| ASTM G 198 : 2017 | Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood |
| ASTM A 799/A799M : 2010 : R2020 | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content |
| ASTM B 530 : 2009 : R2021 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ASTM B 530 : 2009 : R2014 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.