ASTM B 214 : 2016 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Sieve Analysis of Metal Powders
Available format(s)
PDF
Superseded date
10-09-2022
Superseded by
Language(s)
English
Published date
29-04-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 02.05, 2017 Explains the dry sieve analysis of metal powders or mixed powders, using sieves with openings ranging from 45 to 1000 micrometers.
| Committee |
B 09
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the dry sieve analysis of metal powders, using sieves with openings ranging from 45 to 850 micrometres.
1.2This test method is based on a particular type of mechanical sieve shaker (see 5.2). Other types of sieve shakers are also available, but their precision and reproducibility have not been determined.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| SAE AMS 5792 : 2012 | POWDER, PLASMA SPRAY, 50 (88WC - 12CO) + 35 (70NI - 16.5CR - 4FE - 4SI - 3.8B) + 15 (80NI - 20AL), THREE-COMPONENT MIXTURE |
| MIL-I-82819 Base Document:1986 | INSULATION, THERMAL, POLYISOPRENE, SILICA & ASBESTOS FILLED |
| SAE AMS4784G | Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 50Au - 25Pd - 25Ni 2015 to 2050 °F (1102 to 1121 °C) Solidus-Liquidus Range |
| SAE AMS3430E | Brazing Filler Metal, Paste, Copper Water Thinning |
| SAE AMS4770L | Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range |
| AWS A5.13 : 2000 | SOLID SURFACING WELDING RODS AND ELECTRODES, SPECIFICATION FOR, |
| MIL-A-82832 Base Document:1986 | ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING |
| MIL-M-48245 Revision B:1988 | MOLDING COMPOUND, HOUSING |
| SAE AMS4774G | Silver Alloy Brazing Filler Metal 63Ag - 28.5Cu - 6.0Sn - 2.5Ni 1275 to 1475 °F (691 to 802 °C) Solidus-Liquidus Range |
| MIL-Z-81572 Base Document:1968 | Zirconium Oxide, Lime-Stabilized, Powder and Rod, for Flame Spraying |
| SAE AMS 2453 : 2015 | LOW STRESS GRINDING OF STEEL PARTS HEAT TREATED TO 180 KSI OR OVER, AND LOW STRESS GRINDING OF CHROME PLATING APPLIED TO STEEL PARTS HEAT TREATED TO 180 KSI OR OVER |
| AWS A5.21/A5.21M:2011 | SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING |
| ASTM D 520 : 2000 | Standard Specification for Zinc Dust Pigment |
| AWS A5.13/A5.13M : 2010 | SPECIFICATION FOR SURFACING ELECTRODES FOR SHIELDED METAL ARC WELDING |
| AWS A5.21 : 2001 | SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING |
| I.S. EN ISO 14232-1:2017 | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| SAE AMS4788B | Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 °F (660 to 707 °C) Solidus-Liquidus Range |
| ASTM F 106 : 2012 : R2017 | Standard Specification for Brazing Filler Metals for Electron Devices (Withdrawn 2024) |
| EN ISO 14232-1:2017 | Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) |
| SAE AMS 4998 : 2013 | TITANIUM ALLOY POWDER, 6Al - 4V |
| ASTM C 699 : 1979 | Method for Chemical, Mass Spectrometric, and Spectrochemical Analysis of, and Physical Tests on Beryllium Oxide Powder (Withdrawn 1992) |
| MIL-DTL-512 Revision C:2001 | Aluminum Powder, Flaked, Grained, and Atomized |
| 16/30301923 DC : 0 | BS EN ISO 14232-1 - THERMAL SPRAYING - POWDERS - PART 1: CHARACTERISATION AND TECHNICAL SUPPLY CONDITIONS |
| BS EN ISO 14232-1:2017 | Thermal spraying. Powders Characterization and technical supply conditions |
| SAE AMS 7875 : 2017 | POWDER, CHROMIUM CARBIDE PLUS NICKEL-CHROMIUM ALLOY, 75CR[2]C[3] + 25 (80NI - 20CR ALLOY) |
| MIL-P-62426 Base Document:1991 | POWDER, CHROMIUM CARBIDE - NICKEL CHROMIUM ALLOY (METRIC) |
| SAE AMS3420G | Dehydrating Agent Silica Gel |
| SAE AMS4997B | Titanium Alloy, Powder 5Al 2Sn 2Zr 4Cr 4Mo 0.10O₂, Premium Quality |
| SAE AMS4769G | Silver Alloy, Brazing Filler Metal 45Ag - 24Cd - 16Zn - 15Cu 1125 to 1145 °F (607 to 618 °C) Solidus-Liquidus Range |
| SAE AS7101C | National Aerospace and Defense Contractors Accreditation Program (NADCAP) General Requirements for Materials Test Laboratory Accreditation Program |
| SAE AMS4785J | Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range |
| AWS A5.8/A5.8M : 2013 | SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING |
| SAE AMS4783G | Cobalt Alloy, High Temperature Brazing Filler Metal 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 to 2100 °F (1121 to 1149 °C) Solidus-Liquidus Range |
| SAE AMS4768J | Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range |
| SAE AMS 4740 : 2012 | COPPER POWDER 99.0 CU, MINIMUM AS FABRICATED |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| SAE MAM4778D | Nickel Alloy, Brazing Filler Metal, 92Ni 4.5Si 3.1B, 980 to 1040°C Solidus-Liquidus Range |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| SAE AMS4766H | Silver Alloy, Brazing Filler Metal 85Ag - 15Mn 1760 to 1780 °F (960 to 971 °C) Solidus-Liquidus Range |
| ASTM D 521 : 2002 : R2012 | Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| SAE AMS 5793 : 2012 | POWDER, PLASMA SPRAY, 95NI - 5AL |
| ASTM F 3049 : 2014 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
| SAE AMS4786J | Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range |
| AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
| NASA MSFC SPEC 3706 : 2016 | SPECIFICATION FOR 60NI-40TI BILLETS |
| DIN EN ISO 14232-1 E : 2017 | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| MIL-P-62423 Base Document:1982 | POWDER, POLYESTER-ALUMINUM (METRIC) |
| MIL-P-83348 Revision A:1983 | POWDER, PLASMA SPRAY |
| MIL-P-85856 Base Document:1988 | POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS GENERAL SPECIFICATION FOR |
| MIL-P-62424 Base Document:1982 | POWDER, YTTRIUM, ALUMINUM, NICKEL-CHROMIUM (METRIC) |
| MIL-A-82836 Base Document:1987 | ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS |
| SAE AMS4778K | Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range |
| SAE AMS4773G | Silver Alloy, Brazing Filler Metal 60Ag – 30Cu – 10Sn 1115 to 1325 °F (602 to 718 °C) Solidus-Liquidus Range |
| ASTM F 1377 : 2013 : REDLINE | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
| ASTM F 3187 : 2016 | Standard Guide for Directed Energy Deposition of Metals |
| DIN EN ISO 14232-1:2016-02 (Draft) | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| SAE AMS2430T | Shot Peening, Automatic |
| SAE AMS 3040 : 2014 | MAGNETIC PARTICLES, NONFLUORESCENT, DRY METHOD |
| QQ-B-650 Revision C:1987 | BRAZING ALLOYS, COPPER, COPPER ZINC, AND COPPER PHOSPHORUS |
| MIL-U-70457 Base Document:1983 | Uranium Tetrafluoride (UF4), Depleted |
| SAE AMS7879F | Tungsten Carbide-Cobalt Powder |
| QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
| MIL-DTL-32495 Base Document:2014 | ALUMINUM-BASED POWDERS FOR COLD SPRAY DEPOSITION |
| SAE AMS4762B | Silver Alloy, Brazing Filler Metal 40Ag - 30Cu - 30Zn 1245 to 1340 °F (674 to 727 °C) Solidus-Liquidus Range |
| SAE AMS4771J | Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 °F (632 to 688 °C) Solidus-Liquidus Range |
| SAE AMS2449 | Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels |
| SAE AMS4764F | Copper Alloy, Brazing Filler Metal 52.5Cu - 38Mn - 9.5Ni 1615 to 1700 °F (879 to 927 °C) Solidus-Liquidus Range |
| SAE AMS2431D | Peening Media General Requirements |
| SAE AMS4765F | Silver Alloy, Brazing Filler Metal 56Ag - 42Cu - 2.0Ni 1420 to 1640 °F (771 to 893 °C) Solidus-Liquidus Range |
| SAE AMS7878C | Tungsten Carbide Powder, Cobalt Coated |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| NASA MSFC SPEC 3717 : 2017 | SPECIFICATION FOR CONTROL AND QUALIFICATION OF LASER POWDER BED FUSION METALLURGICAL PROCESSES |
| SAE AMS4763B | Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range |
| ASTM F 106 : 2012 | Standard Specification for Brazing Filler Metals for Electron Devices |
| ASTM F 3001 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ISO 14232-1:2017 | Thermal spraying — Powders — Part 1: Characterization and technical supply conditions |
| SAE AMS4767G | Silver Alloy, Brazing Filler Metal 92.5Ag - 7.2Cu - 0.22Li 1435 to 1635 °F (779 to 891 °C) Solidus-Liquidus Range |
| MIL A 512 : A | ALUMINUM POWDER, FLAKED, GRAINED AND ATOMIZED |
| MIL-P-62680 Base Document:1992 | POWDER, NICKEL-CHROMIUM/ALUMINUM COMPOSITE (METRIC) |
| SAE AMS4780F | Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range |
| MIL-R-17131 Revision C:1981 | RODS AND POWDERS, WELDING, SURFACING |
| MIL-A-82728 Base Document:1984 | ALUMINUM POWDER, ATOMIZED (FOR USE IN EXPLOSIVES) |
| UNE-EN ISO 14232-1:2017 | Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) |
| SAE AMS4772K | Silver Alloy, Brazing Filler Metal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 °F (718 to 857 °C) Solidus-Liquidus Range |
| SAE AMS4787G | Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature |
| SAE AMS5791C | Cobalt Alloy, Powder, Plasma Spray 56.5Co - 25.5Cr - 10.5Ni - 7.5W |
| SAE AMS7001 | Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb |
| SAE AMS4761B | Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to 1330 °F (649 to 721 °C) Solidus-Liquidus Range |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM D 521 : 2002 | Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ASTM D 520 : 2000 : R2005 | Standard Specification for Zinc Dust Pigment |
| ASTM D 520 : 2000 : R2011 | Standard Specification for Zinc Dust Pigment |
| ASTM D 521 : 2002 : R2007 | Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
| ASTM B 212 : 2017 : REDLINE | Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel |
| ASTM B 215 : 2015 : REDLINE | Standard Practices for Sampling Metal Powders |
| ASTM B 703 : 2017 | Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.